This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information.
This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine.
制造商：现代WIA 型号：L200SY 年份：2014 状态：使用过 库存编号：4923 控制系统：FANUC 31i系列A型 开车时间：11750小时 最大转弯直径：550毫米 最大转弯长度：530毫米 X轴最大行程长度：220毫米 最大主轴转速：4000/6000 1/分钟 最大转弯直径：240毫米 研磨直径：550毫米 主轴直径：65毫米 车床夹头直径：210毫米 ZB轴最大行程：720毫米 Y轴最大行程长度：+-40毫米 所有工具数量：12件 反主轴功率：3.7/2.2千瓦 高压冷却：14.5巴 主轴驱动功率：15/11千瓦 长度：3045毫米 宽度：1707毫米 重量：4600公斤 高度：2021毫米 2019年：夹头和刀具探针更换 装备： 8件式工具架 4x动力工具 内套筒缩减套
这款五轴现代Wia Hi-MOLD 560/5A立式加工中心于2014年制造。其工作台尺寸为1,2506 0毫米，最大载重能力为800公斤，主轴转速为24,000转/ 钟，功率为33千瓦。该机床在所有轴向下均可实现50 /分钟的快速进给速度，换工具时间为5.5秒。如果您 获得高质量的铣削能力，可以考虑我们正在出售的现 代Wia Hi-MOLD 560/5A机器。请联系我们了解更多信息
Key data: 1160 mm
现代WIA的强力立式数控车床 建设年份 2013年 FANUC 32i 手册指南 最大转弯直径1,160毫米 最大摆动直径1,355毫米 主主轴功率最高可达60千瓦 最大扭矩：6,490牛·米 C轴，分辨率为0.001° 12速BMT85P工具转塔 12个动力工具站 雷尼肖Q-Setter 现代WIA工具损坏监测 20巴冷却剂系统 铰链式碎屑输送机 800毫米三颚钩 Seoam CAS 32
A Hyundai Wia CNC turning center is offered. Max. turning diameter: 560mm, swing diameter over bed: 780mm, swing diameter over slide: 535mm, max. turning length: 1180mm, chuck diameter: 381mm, main spindle bore: 130mm, max. bar capacity: 117mm, max. spindle speed: 2000rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3073Nm/2490Nm, turret: 12, tool interface: BMT-75, live tools: max. 4000rpm, 7.5kW/5.5kW, X/Z travel: 320mm/1200mm, rapid traverse X: 20m/min, rapid traverse Z: 25m/min, coolant tank capacity: 300l, control: FANUC Series 32i-B, control ON: approx. 10574h, operating time: approx. 5606h, cutting time: approx. 4876h, total parts count: 30968, weight: approx. 11t. Equipment: C-axis, live tools, automatic tool measurement in the working area, programmable tailstock with MT5 quill, high-pressure through-tool coolant (20bar), hydraulic 15-inch power chuck, Manual Guide i, ...
这款四轴现代Wia L2100SY车削中心于2012年制造。其最大转弯直径为335毫 ，转弯长度为455毫米。该机配备了12个转速塔，主轴 速可达4500转/分钟。如果您想获得高质量的转向功能 ，可以考虑我们正在出售的现代Wia L2100SY机。如需更多信息，请联系我们
这款三轴现代Wia F500于2012年制造。其桌面尺寸为1000×450毫米，最大桌 载重为600公斤。主轴转速可达10,000转/分钟，持续输 功率为15千瓦。如果您想获得高质量的加工能力，可 考虑我们正在出售的现代Wia F500立式加工中心。如需更多信息，请联系我们
这台四轴现代Wia LM 1800TTSY水平转车机于2021年制造。它配备了带有主主轴 反主轴的斜床车床，两个转塔头和带驱动工具的Y轴 配备Fanuc F31i A控制装置，支持转弯直径230毫米，长度673毫米。如果 你想获得高质量的转弯能力，可以考虑我们正在出售 现代Wia LM 1800TTSY机车。请联系我们了解更多信息
For sale is a Hyundai twin turret CNC lathe LM 1600 TTSY from 2023 with 1565 operating hours and 506 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Multitasking is possible with the addition of a Y-axis to the upper turret (TTSY specifications)., - Integrated machining through synchronized control of main and counter spindles, - Design with hybrid guides: Combination of box guide (XY axis) and roller guide (Z axis), (Series LM1600/1800TT), Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB/Y) 65/195/700/720/700/100 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB/Y) 20/20/4 ...
For sale is a Hyundai twin-turret CNC lathe LM 1600 TTMS from 2023 with 1407 operating hours., and 343 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Integrated machining through synchronized control of main and counter spindles, Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min, - Lead type LM, - Number of tools: 2 x 12 pieces, - Tool size 20/32 mm, - Milling spindle speed 5,000 rpm, Subject to prior sale, changes and errors!
这款现代Wia SE2200LMSC车床于2021年在韩国制造，累计生产时数为3316 时，其中538小时为主轴小时。它配备了现代Fanuc i Series Smart Plus控制单元。该机器的主轴转速为3500转/分钟
这台现代WIA L300 LMC车床是2019年制造的。它配备了西门子Sinumerik 828D控制单元。该机器的主轴转速为3000转/分钟
这台现代Wia E200C车床于2012年制造。其工作直径为550毫米，最大工 长度为300毫米，主轴上的孔径为65毫米。我们出售的 现代Wia E200C机器主轴功率为15/11千瓦，转速可达4000转/分钟， 精密加工的有力选择。如需了解该车床的更多信息 请联系我们
tube diameter: 406.4 - 1625.6 mm wall strength: 9 - 60 mm bending radius min.: - mm pressure: 10000 t tube: 8000 - 12000 / 16000 mm Plate thickness: 9 - 60 mm distance between columns: mm control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The HYUNDAI-WIA JCO Press Bending Machine is a heavy-duty industrial hydraulic press used to form large-diameter, longitudinally seam-welded (LSAW) steel pipes. Sequential Shaping: The machine bends a flat steel plate step-by-step into a pipe shape. It first presses the edges into a J shape, then curves them further into a C shape, and finally closes them into an O shape • Year of Modernization: 2025 1. Edge Milling Machine 2. Pre Bending Machine 3. In Feeder 4. JCO Press Bending Machine 5. Tack Welding Machne 6. Insdie Welding Machine 7. Outside Welding Machine 8. 4-way (Inpending) Machine 9. End Facin ...
turning diameter: 256 mm turning length: 530 mm control: Fanuc 31i-A turning diameter over bed: 550 mm turning diameter over cross slideways: 350 mm main spindle:: max. turning speeds: 6000 min/-1 Drive power - main spindle: 11 kW max. torque: Nm max. rod diameter: 45 mm spindle head: A2-5 chucking diameter: mm tool turret:: shaft height for square tool: 25 mm Drill shank diameter: 50 mm travel:: x-axis: 210 mm z-axis: 560 mm feeds:: rapid traverse: x 20 / z 24 m/min total power requirement: kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 m Technical Specifications: - Manufactured in 2017 but not put into operation until 2021 - Fanuc 31i mod A CNC control - Y-axis - 20 bar tool cooling - Fedek bar loader - Chip conveyor - 12-station tool turret - 10 rotating tools The data for this ad was created with ModulMWS - the software solution o ...
spindle diameter: 135 mm x travel: 3000 mm y travel: 2000 mm - Z-axis travel: 1600 mm travel -w axis: 700 mm TABLE: table-size: 2000 x 1800 mm table load: 10 t B-axis (table): 0,001 ° MILLING SPINDLE / HEAD: - spindle revolutions (max): 5 - 2000 U/min - spindle diameter: 135 mm - tool fixture: ISO SK 50: BT 50 TOOL MAGAZINE: - number of positions: 40 feed: 1 - 4000 mm/min rapid traverse: 8 m/min control: Fanuc 16i-MB total power requirement: 42 kVA weight of the machine ca.: 37,2 t dimensions of the machine ca.: 6,3 x 6,9 x 4,79 m equipped with: - CNC Control Fanuc 16i-MB - NC-Rotary Table 1800x2000mm - ATC 40-fold (BT 50) - COOLANT THROUGH THE MAIN AXIS - Chip Conveyor - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
