其他铣床 (22)

制造年份：2015 机型：BC 1001 HS 总制作小时：1608小时 总待命时间：5070小时

Steel Storage Structure for Plates and Materials Type: Structure for storing plates and materials Material: High-strength structural steel Profiles: Welded rolled or tubular steel sections Construction: Reinforced structure with horizontal and vertical bracing Finish: Anti-corrosion paint or epoxy coating Height: 2,000 mm – 4,000 mm Width: According to number of storage bays Depth: Adapted to sheet dimensions Capacity per level: Variable (e.g., 1,000 kg – 5,000 kg per compartment) Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-48274-45

铣床 TOS KURIM FRO 6，FRO8

WITHOUT tools and clamping devices Gearbox defective, feed gears can no longer be shifted Output via goods elevator Pick-up date: 17.08 - 19.08 Auction-ID: A1-48584-17

轴类磨削、抛光、铣削机 规格： - 速度 850 至 12000 rpm - 柔性轴约 2 米 - 移动底盘系统 - 适用于研磨和抛光工具 - 驱动 380 V / 1.0 hp - 空间要求 宽 500 x 高 1000 x 深 500 毫米 - 重量约 45 千克 - 移动底盘系统

Technical data Table size: 1,240 × 305 mm Travel: X: 950 mm Y: 400 mm Z: 460 mm Spindle speed: infinitely variable approx. 50–3,600 rpm Spindle drive: 2 hp (approx. 1.5 kW) Vario speed Power supply: 380 V / 50 Hz (original version) Spindle holder: ISO 40 Facilities Infinitely adjustable Panak milling head X-axis power feed Coolant device Machine vise Original user manual Robust cast construction with swivelling milling head Tool cabinet with contents Transport dimensions tool cabinet 750x550x1000 Auction-ID: A1-48591-5

小型钻铣床 ISERT ELECTRONIC 行程 X：350 毫米 Y 轴行程： 300 mm Z 轴行程： 70 mm 回转： 8000 / 9500 / 13500 / 20500 / 24000 RPM 该机器可用于钻孔印刷电路板或其他用途。 该机器是通过不再存在的 PC 控制的。 可以在手册中使用它 配备：1 台 KRESS 铣床 电压：220 V 单声道 尺寸（长 x 宽 x 高）：950 x 700 x 700 毫米 重量：约 60 KG

Year of construction: approx. 1981 Accessories: - Universal milling head, tangential milling head, - Interchangeable wheels - 2 cutting equipment, - little used Auction-ID: A1-48483-48

豪瑟3DR夹具镗铣床 行程 X： 400 mm 行程 Y： 200 毫米 行程 Z： 400 mm 主轴：2速 锥体：厘米2 主轴出口： 120 mm 2 种速度范围 60-1500 RPM / 1500-3000 RPM 工作台尺寸： 长 590 毫米 x 宽 320 毫米 主轴上的变速器 2 前进 自动下降：0.03毫米/分钟 - 0.06毫米/分钟 X轴功能与三丰设计 Y 轴和 Z 轴：缺陷刻度 电压： 380 V 宽度： 1500 mm 深度： 1700 mm 低位置高度： 1800 mm 重量： 约 1，5 T

Waelzfraeser with shaft FETTE 2356808 GN461 DIN3968AAA 002.90 2697.1 02 m³ L1 E= 20° DIN3972 I - Stgs. 1°24 pz9.4276 HN PM3 Auction-ID: A1-48483-19

The conception of the basic machine is characterized by the following features: - horizontal position of the workpiece spindle; vertical position of the milling cutter spindle or of the milling head - The workpiece is picked up between the workpiece headstock (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The shift milling head is equipped with automatic angle adjustment (A-axis); the shift slide (Y-axis) moves tagential to the Workpiece diameter - CNC controlled - IBH control - Charging device - a lot of accessories Technical data: - Largest millable module with hobs according to DIN 8002: 4.5 mm - Largest millable module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Max. workpiece nozzle for manual loading: 200 mm - Max. workpiece nozzle for autom ...

Workpiece diameter at ratio 1:10 = 300mm, workpiece diameter at ratio 1:1 = 212 mm, number of teeth: 6-200 Auction-ID: A1-48483-39

Gear hobbing machine – vertical: Make: Pfauter Type: P 630 Year of manufacture: unknown Control type: conventional Technical details: - Condition good - Wheel diameter - max. 630 mm - Wheel width 375 mm - Module - max. 10 - Clamping table 550 mm - Table bore 125 mm - Milling cutter speeds infinitely variable 62 - 390 rpm - Mounting cone MORSE 5 - Axial feeds 0.40 - 6.80 mm/rev - Radial feeds 0.10 - 1.76 mm/rev - Distance between milling spindle and clamping spindle 50 - 425 mm - Tooth count range min. 8 - Milling cutter diameter x width 192 / 215 mm - Milling cutter displacement 200 mm - Main drive motor 7.5 kW - Total power requirement 21 kVa - Machine weight approx. 8.2 t Additional information: Equipment of Machine: - Universal milling head with tangential displacement - Pressure reducing valve for counter holder - Magnetic chip conveyors Auction ...

Year of manufacture approx. 1980, wheel diameter: 406mm, wheel width 420mm, module min.-max.: 0.5-+4.3, milling cutter speeds 49-246 rpm Auction-ID: A1-48483-11

Auction-ID: A1-41278-5

Max. bevel width 8 mm, infinitely adjustable angle adjustment Auction-ID: A1-48193-25

Auction-ID: A1-41278-25

Auction-ID: A1-41278-562

Taper size: SK 30; Equipped with schunk NSE 138 pneumatic clamp Auction-ID: A1-48232-70

worktable length: 1600 mm,worktable width: 400 mm,minimum vertical spindle speed: 45 rpm,maximum vertical spindle speed: 1800 rpm,X-axis travel length (mechanical feed): 1190 mm,Y-axis travel length (mechanical feed): 530 mm,Z-axis travel length (mechanical feed): 540 mm,maximum X-axis feed rate: 33.3 mm/s,maximum Y-axis feed rate: 33.3 mm/s,maximum Z-axis feed rate: 33.3 mm/s,total power requirement: 25 kW Auction-ID: A7-48036-18

MECAL MC309 NIKE CNC machining center for aluminum and PVC profiles. This computer-controlled machining centre is designed for milling, drilling and machining aluminium and plastic profiles and is equipped with a closed machining cabin, automatic profile clamps and a movable machining unit. The machine is equipped with an external control console with Siemens PC, Samsung monitor and Mecal control. In addition, several tool holders with clamping tools are included, as shown in the photos. According to the nameplate, it is a MECAL MC309 NIKE, built in 2006. The machine is suitable for professional applications in window, door and façade construction or other profile processing industries. Signs of wear appropriate to age and industrial use are present. Auction-ID: A3-46197-14845

台面 1,524 x 355 毫米 槽宽 18 毫米 桌纵向进给 3 - 1016 毫米/分钟 - 快速进给 2,400 毫米/分钟 桌交叉进给 3 - 1016 毫米/分钟 - 快速进给速度 2,400 毫米/分钟 槽间距 100 毫米 T 型槽数 3 个纵向行程 1,220 毫米 横向行程 508 毫米 垂直行程 508 毫米 主轴锥度 ISO 50 主电机功率 7.36 千瓦 电压 380/220 伏 附带附件： 尺寸显示、铣刀轴、铣刀、垫片、锥形、夹�