铣边机 (12)

规格： 纵向行程（x 轴） 15,900 mm 水平进给路径（z 轴） 790 mm 垂直进给路径（y 轴）500 mm 铣削主轴的旋转范围 45F +/- 直流电机的轮轴驱动功率 50 kW 前轴承铣削主轴直径 160 mm 刀柄内部符合 ISO No. 50 DIN 2079 标准 刀柄超出 ISO 60 号 刀具进给 - 手动通过螺纹杆 M24 主轴转速在 50-500 rpm 的 2 个范围内无级变化。 第一级转速范围为 50-250 rpm。 第二级转速范围为 100-500 rpm。 步跃 1：2 恒定功率范围 160 rpm。 铣削主轴上的最大扭矩 2,000 Nm x 方向的铣削进给量在 40-4,000 mm/min 之间无级变化。 快速移动 8,000 毫米/分钟。 y 方向和 z 方向的调节速度在 20-500 毫米/分钟之间无级变化。 y轴和z轴快速移动1,000 mm/min。 铣削主轴的最大旋转速度 2/秒。 显示3 ...

Auction-ID: A1-40116-147

Wall grooving machine BAIER BDN 453 230V; 1800W; 7800 rpm; Milling depth: 7-45 mm; Milling width: 7-35 mm. Auction-ID: A7-47803-28

Wall groove milling machine BAIER BDN 453 230V; 1800W; 7800 rpm; Milling depth: 7-45 mm; Milling width: 7-35 mm; Auction-ID: A7-47803-76

Wall groove milling machine BAIER BDN 452 230V; 1650W; Speed: 8200 rpm; Milling width: 7-30 mm; milling depth: 7-27 mm Auction-ID: A7-47803-57

Wall groove milling machine BAIUER BDN 452 230V; 1650W; Speed: 8200 rpm; Disc diameter: 150 mm; Milling depth: 7-27 mm; milling width: 7-30 mm. Auction-ID: A7-47803-134

Wall groove milling machine BAIER BDN 453 230V; 1800W; 7800 rpm; Milling depth: 7-45 mm; Milling width: 7-35 mm; Auction-ID: A7-47803-54

Facade milling machine BAIER BFF 222 230V; 800W; Speed: 1100 rpm; Torque: 10 Nm; Working width: 190 mm; milling depth: 0 - 6 mm. Total weight: 8 kg. Auction-ID: A7-47803-37

Plaster and plaster milling machine BAIER BPF 200 230V; 400W; Speed: 800 rpm; Torque: 8 Nm; Milling depth: 12-20 mm; milling width: 13-16 mm. Auction-ID: A7-47803-83

Wall groove milling machine BAIER BDN 455 Serial number: 2582; 230V; 2150W; Speed: 7200 rpm; Disc diameter: 185 mm; Milling width: 9-43 mm; Milling depth: 15-60 mm; Total weight: 10 kg. Auction-ID: A7-47803-95

Dimensions (L/W/H): 980x860x1380 mmWeight: 165 kgTotal power requirement: 0,75 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0,75 kWdegree: 45° Gradturning speeds: 10.000 U/minmilling height: 4,0 mmmotor: 400 Voltrange L-W-H: 560 x 300 x 450 mmweight: 44,0 kgDescription :- Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched- Ideally suited for deburring and chamfering (visible edges) of various- Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc.- Ideal for producing visible edges with excellent surface quality- High dead weight for vibration-free workscope of delivery- Slidable guide rail 500 mm- milling head- HM indexable inserts- Operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.