Ref.nr 00912 设备齿轮夹斗机的名称 该机器适合经济地生产圆柱形齿轮、齿轮 以及单一和批量生产中的齿轮。凭借其坚固的设计和 精度，PFAUTER至今仍是 工具与齿轮箱结构 制造商：Pfauter P160HI型号 建于1970年 技术数据： 轮径：最大160毫米 轮宽：最大355毫米 模块范围：0.5 – 4.5 铣刀直径：最大115毫米 铣刀长度：最大105毫米 铣头旋转范围：120 转速：400转/分钟 中心宽度：410毫米 机器尺寸（长 x 宽 x 高）：约 2,000 x 1,500 x 2,000 毫米 技术上来说，条件还算可以， 目前处于仓库中已拆解状态，覆盖式 必要时，也可以在卖方同意的情况下进行演示 立即提交日
spindle taper: 2 x SK 40 forward bearing diameter: 110 mmmilling head speed: 100 - 4500 U/minmilling drive: 5,1 kWworkpiece length - max.: 830 mmworkpiece dia. with double equipment: max. 135 mmtaper diameter: 78 g6 mmcentre height: 260 mmturning speed range - stepless: max. 15 U/mindistance of spindles: 135 mmspindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mmFeed speed: max. 6 m/min.surface area: 200 x 1750 mm: tool post (Z-axis): stroke of tool slide: 120 mmFeed speed: max. 2 m/min.column movement: 200 mm: tail stock: tailstock quill stroke: 100 mmmorse taper: 3 MKcentre height: 260 mmaxial distance of the quills: 135 mmpassage of steadyrest: 40 - 80 mmcontrol: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 twith SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolantThe data for this ...
max. workpiece diameter: 500 mmthreading length: 5000 mmmax. module: 10 min. module: 2 workpiece dia. over saddle: 250 mmcenter height over bed: 260 mmworkpiece dia. over bed: 500 mmworkpiece spindle bore: 102 mmthread pitch: 1 - 800 mmspeed of workpiece (milling): 0,0034 - 2,65 U/minfeeds - longitudinal: 0,256 - 195 mm/minfeeds - rolls: 0,0256 - 5,17 mm/WUhob turning speeds: 45 - 900 U/minelectrics - voltage/frequency: 380 / 50 V/Hztotal power requirement: 8,5 kWweight of the machine ca.: 6,6 tdimensions of the machine ca.: 7,0 x 1,7 x 1,6 mThread-, Worm-,gear shafts- and Spline Milling Machine with :equipped with:- Thread Milling Head ApGs- Counter Stay- 1 Bush Rest- 2 Steadies- Cabinet with change GearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 10 min. module: 1 workpiece dia. over saddle: 250 mmspindle bore of workspindle: 102 mmquill stroke: 100 mmworkpiece turning speeds: 0,0032 - 2,6 U/minfeeds - rolls: 0,027 - 5,66 mm/WUfeeds - longitudinal: 0,3 - 198 mm/minmain drive: 4 kWswivel angle for work spindle: 90/120 °diameter of hob: 150 mmmilling width: 100 mmhob turning speeds: 45 - 560/900 U/mintotal power requirement: 9,5 kWweight of the machine ca.: 4,2 tMachine equiped with:- Heavy Duty Hob Head ApFw- change gears- Milling Head ApFF- Single Indexing Device ETE- Bush Rest- Coolant TankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
