钣金加工设备 二手 出售 (3,359)

sheet width: 3100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdistance between columns: 3100 mmno. of strokes: 18 Hub/mindown holder: 14 Stückoil volume: 150 ltr.cutting angle: 1,2 °control: CYBELEC CybTouchtotal power requirement: 11,0 kWweight: 6300 kgrange L-W-H: 4.000 x 2.100 x 1.640 mm--------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------- Furnishing:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel ...

I-beam section - upend: 120 x 25 (d 1600) mmbar material dia. max.: 140 x 3 (d 3000) mmL-beam: 100x100x10 (d 1600) mmsquare material: 140 x 40 x 3 (d 4000) mmI - beam section - flat steel: 200 x 35 (d 1000) mmbar material - diameter: 70,0 (d 800) mmtool taper: 100,0 mm0: 315 mmturning speeds: 5,4 m/min.total power requirement: 11,0 kWweight: 2.240 kgrange L-W-H: 1500 x 1650 x 2100 mmFurnishing:- electro-hydraulic ring/profile bending machine- Hydraulic lower/side roller adjustment for extra small bending radii- Lower/side roller can be delivered individually- 3x powered rollers- divided roller segments- Digital position display of the bottom/side rollers Display with TouchScree function- hardened tool holder (42CrMo4)- Machine base- 2x hydraulically adjustable side guides- Horizontal and vertical work possible- freely movable control panel- Pressure gauge / pressure indicator for the rol ...

sheet width - max.: 1255 mmplate thickness: 4.0 mm STplate thickness: 2.0 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: ~ 66 Hübe/min.cutting angle: 1.5 °total power requirement: 5.5 kWweight of the machine ca.: 2600 kg.range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition ()Furnishing:- electro-hydraulic guillotine shears- manual backgauge with analogue position display (scale + magnifying glass)- electrical cutting length limitation- manual cutting gap adjustment- 1x extra long side stop- 2x extra long support arms- 1x free moving footswitch- rear sheet metal slide- User manual (PDF) Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9325278The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3.0 mm STcutting angle: 2.0 °stroke max.: 38 p. Min.total power requirement: 5.5 kWweight of the machine ca.: 1690 kgrange L-W-H: 1800 x 1800 x 1250 mm from a maintenance workshop ()Furnishing:- Motorized / electric guillotine shears- manual backgauge, adjustment by hand crank Travel range max. 700 mm with analogue position display (scale) manual adjustment from behind- rear protection- rear sheet metal slide- free-moving footswitchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3.0 mmthickness at Niro-steel: 1.5 mmno. of strokes: 35 Hub/mincutting angle: 2°30 °engine output: 3.0 kWtable height: 810 mmweight of the machine ca.: 1150 kg.range L-W-H: 1300 x 1520 x 1170 mm from a maintenance workshop ()Furnishing:- robust electro-motorized metal sheet shears- manual backgauge- adjustable up to 610 mm, using the handwheel from the back- 1x side stop including mm scale- 2x table sheet metal support arms- Piece counter- freely movable foot switch- rear sheet metal slide- EMERGENCY stop button at the front Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9325126The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I-beam section - upend: 100 x 20 (d 2100) mmbar material dia. max.: 100 x 3 (d 3000) mmL-beam: 80x80x8 (d 2000) mmsquare material: 50 x 25 x 2 (d 600) mmI - beam section - flat steel: 120 x 30 (d 600) max.140b mmbar material - diameter: 60.0 (d 1000) mmtool taper: 80.0 mmoil volume: 100 Literturning speeds: 4.2 m/min.weight: 1600 kgrange L-W-H: 1240 x 1375 x 1540 mm Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- electro-hydraulic ring/profile bending machine- hydraulic bottom/side roller adjustment for extra small bending radii- bottom/side roller can be adjusted individually- 3x driven rollers- divided roller segments- digital position display of the bottom/side rollers Display with touchscreen function- hardened tool holder (42CrMo4)- machine base- 2x hydraulically adjustable side guides- horizontal and vertical wo ...

pressure: 50.0 tchamfer lenght: 1275 mmdistance between columns: 1040 mmcolumn arm: 250 mmram stroke speed: 225 mm/secwork speed: 0 - 9.8 mm/secreturn speed: 160 mm/secwork stroke: 215 mmdayligth: 512 mmtable height: 800 mmback stop - adjustable: 600 mmcontrol: DELEM DM 51 operating pressure: max. 300 baroil volume: 150 ltr.voltage: 400 Vengine output: 6.0 kWWeight: 4300 kgrange L-W-H: 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=5L8L2AYv0PU-------------------------- -----------------------------PLACKE electro-hydraulic CNC press brakespecially developed for the production of small partsThe advantages:• Low energy consumption• High operating comfort• Wide range of applications• Fast, robust, low-noise• With CNC control as standard-- ...

sheet width: 3020 mmplate thickness: 4.0 mmOpening width / upper beam: 350 mmAdjustment folding beam: 100 mmadjustment of lower beam: 80.0 mmbending angle max.: 130 °work height max.: 900 mmControl: SIEMENS OP 7 voltage: 400 Vtotal power requirement: 9.5 kWweight: 5400 kgrange L-W-H: 4300 x 2400 x 1780 mmFurnishing:- SIEMENS - PLC control model OP 7 Bending process as a controlled, fully automatic, or semi-automatic workflow can be selected Bending angle adjustment electronically preselectable 0-135 °- electr. / controlled backgauge X = 1000 mm with large sheet metal support surface- heavy welded construction- all drives both. via worm gear- Motorized adjustment of the bending beam- large adjustment range of the cheeks- hydraulic upper tool clamping- Insert / bending tools- Operation manual Special accessories included:- separate split goat foot splint H 170 mm Machine video:- https: ...

sheet width: 1050 mmplate thickness: 3,3 mmpre-bending: 3,0 mmroll length: 1050 mmroll diameter: 90,0 mmmin. dia.: 130,0 mmengine output: 1,1 kWweight: 570 kgrange L-W-H: 1.800 x 800 x 1.130 mmFurnishing:- Robust electro-mechanical bending machine- 2x central rollers driven by an electric motor (top and bottom roller)- Top roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- Lower roller manually adjustable, by hand wheel- asymmetrical roller arrangement- self-braking main motor- Safety device (safety line with switch unit)- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized side roller adjustment- Digital position display for motor-driven adjustable side rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 5.5 mmpre-bending: 5.0 mmroll diam. toproll: 140 mmmin. dia.: 210 mmturning speeds: 5.7 U/minengine output: 2.2 kWweight: 1365 kgrange L-W-H: 2020 x 900 x 1.200 mmFurnishing:- Robust electro-mechanical bending machine- 2x central rollers driven by an electric motor (top and bottom roller)- Top roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- Lower roller manually adjustable, by hand wheel- asymmetrical roller arrangement- self-braking main motor- Safety device (safety line with switch unit)- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized side roller adjustment- Digital position display for motor-driven adjustable side rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=PBV-MDtZnlEEquipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface- CNC controlled axes: Y1 + Y2  ...

pressure: 175 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secreturn speed: 135 mm/secwork speed: 10,0 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 90,0 mmoil volume: 200 ltr.voltage: 400 Volttotal power requirement: 15,0 kWweight: 11.950 kgrange L-W-H: 5100 x 2150 x 2850 mm--------------------------------------------------Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2  ...

sheet width: 1550 mmplate thickness: 1.2 mmroll length: 1550 mmroll diam. toproll: 75.0 mmengine output: 1.5 kWweight: 430 kgrange L-W-H: 2110 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on requestEquipment:- electro-motor-driven 3-roller round bending machine- asymmetrical roller arrangement- 2x driven rollers using a brake motor- manual folding bearing for quick removal of the workpiece- wire insertion grooves on the bottom and rear rollers- double foot switch for R/L running including emergency stop button- rear roller feed with ratchet lever- electrical safety deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mmplate thickness: 6.5 mmpre-bending: 4.5 mmdiameter of upper rolls: 150 mmside roll diameter: 130 mmdiameter of lower rolls: 150 mmdistance: max. OW zu UW 20,0 mmtotal power requirement: 2.2 + 1.5 kWweight of the machine ca.: 2370 kg.range L-W-H: 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use () Special price on requestEquipment:- electro-hydraulic 4-roller round bending machine with driven top roller + bottom roller stable welded construction- Area of application: light to heavy sheet metal processing (steel/aluminum/stainless steel)- electro-hydraulic adjustment of the bottom + side rollers- linear guidance of the side rollers- top roller driven by robust electric motor + planetary gear- freely movable, separate control panel- hardened rollers SAE 1050 (CK 45)- conical bending device- 3x axis digital display for precise roller positions- electro-hydrau ...

sheet width: 3100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdistance between columns: 3100 mmdown holder: 14 Stückoil volume: 150 ltr.cutting angle: 1,2 °no. of strokes: 18 Hub/mincontrol: CYBELEC CybTouchtotal power requirement: 11,0 kWweight: 6300 kgrange L-W-H: 4.000 x 2.100 x 1.640 mm--------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------- Furnishing:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for lo ...

sheet width: 3050 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmcutting angle: 0.5 - 3.0 °down holder: 18 Stückno. of strokes: 9 / 14 Hub/minback stop - adjustable: max. 750 mmControl: konv. engine output: 10.0 kWweight: 4800 kgrange L-W-H: 3750 x 1600 x 2450 mm maintained condition ()Furnishing:- electro-hydraulic / slide-guided sheet metal shears- front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment- with manual cutting gap adjustment, from the rear- electro-motorized back gauge 10-750 mm- with analogue position display + handwheel for fine adjustment- 1x robust side stop- 1x freely movable foot switch- front finger/encroachment protection- 2x EMERGENCY stop buttons at the front - User manual (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4050 mmplate thickness: 6.50 mmthickness at Niro-steel: 4.00 mmback stop - adjustable: 1000 mmno. of strokes: 6 - 11 Hub/minwork height max.: 880 mmControl: SC 70 cutting angle: 0.5 - 3.0 °down holder: 23 Stückengine output: 11.0 kWweight of the machine ca.: 7500 kgrange L-W-H: 4950 x 1950 x 1720 mm Machine made from light metal production (ALU) good condition including special accessories such as sheet metal holding device- in checked condition - machine video -https://www.youtube.com/watch?v=pv7RRijDXJAFurnishing:- electro-hydraulic/blade-guided guillotine shears - HACO CNC control model SC 70, swiveling at the front left Pre-selection positioning of the backgauge Digital display of actual position value electro-hydraulic cutting angle adjustment electro-hydraulic cutting gap adjustment programmable retraction from the backgauge Programmable cutting length limit Emergenc ...

sheet width: 3230 mmplate thickness: 2.5 mmthickness at Niro-steel: 1.5 mmno. of strokes: 28 - 42 Hub/mincutting angle: 1.60 Gradtable height: 820 mmdistance between columns: 3540 mmControl: ELGO 87P engine output: 6.8 kWweight of the machine ca.: 3410 kg.range L-W-H: 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories ()Equipment:- robust / motorized swing cut guillotine shears- break-proof, torsion-free steel welded construction- compact and clear machine design- NC electro-motorized back stop- including NC ELGO TYP 87P digital control unit adjustable from the front right with target/actual value position input continuous adjustment over the entire travel range rough adjustment via push buttons protection of the limit values with limit switch- Duo-Cut drive with two dynamic, powerful gear motors- support table with recessed grips- hold-down bar with hard rub ...

plate width: 2503 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: 15 - 20 Hübe/mincutting angle: 1.7 °work height max.: 900 mmControl: ELGO TYP 85 total power requirement: 8.5 kWweight of the machine ca.: 3400 kgrange L-W-H: 2913 x 2250 x 1760 mmFeatures:- Robust NC electro-hydraulic guillotine shear- NC electro-motorized backgauge with ELGO control unit- Manual cutting gap adjustment- Front support table including recessed grips- 1x sturdy side stop with scale and tilting cam- 2x sturdy front support arms- 1x freely movable foot switch- Front finger guard- Front emergency stop button- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmdown holder: 14 Stückno. of strokes: 11 - 20 Hub/minoil volume: 310 ltr.cutting angle: 0.05 - 2.0 °throat: 350 mmtable height: 900 mmtotal power requirement: 22.0 kWweight of the machine ca.: 13400 kgrange L-W-H: 5.110 x 2.570 x 2.400 mm Current new price approx. 80.000 Euro Special price upon request- in checked conditions - machinevideo -https://www.youtube.com/watch?v=K4ymYMIJ7_Y-------------------------- ---------------------------------Robust electro-hydraulic CNC sheet metal shear with slide guides Includes CYBELEC DNC 60 CUT control system Includes CNC electro-hydraulic cutting gap adjustment Includes CNC electro-hydraulic cutting angle adjustment----------------------------------------------------------Eq uipment:- CNC electro-hydraulic guillotine shear with slide guides- Includes CYBELEC CNC controller ...

sheet width: 4100 mmplate thickness: 13,0 mm STpre-bending: 10,0 mm STdiameter of upper rolls: 360 mmside roll diameter: 250 mmdiameter of lower rolls: 330 mmtotal power requirement: 11,0 kWweight of the machine ca.: 16.000 kg.dimensions of the machine ca.: 6542 x 1677 x 1900 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solut ...

sheet width: 3100 mmplate thickness: 16,0 mm STpre-bending: 20,0 mm STdiameter of upper rolls: 360 mmside roll diameter: 250 mmdiameter of lower rolls: 330 mmtotal power requirement: 15,0 kWweight of the machine ca.: 13.200 kg.dimensions of the machine ca.: 5542 x 2100 x 1983 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solut ...

sheet width: 3200 mmplate thickness: 4.0 mm STdistance between columns: 3300 mmupper clamping bar adjustment: 400 mmAdjustment folding beam: 80.0 mmpivoting angle: 180 Gradclamping capacity max.: 200 KNrear stop: 10.0 - 1600 mmoil volume: 160 Litertotal power requirement: 9.8 kWweight: 8500 kgrange L-W-H: ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition ()- in checked conditions - machinevideo -https://www.youtube.com/watch?v=RY-amZooeX4Equipment:- Robust CNC folding machine- CNC control unit - CYBELEC DNC 80 PP Swiveling control panel, front right 2D graphic display for display and multiple simulation 2D graphic programming Easy handling- CNC electro-motorized backgauge Travel range 10.0 - 1,600 mm Pneumatic / lowerable stop fingers Adjustment speed max. 250 mm/sec. Rear sheet support table with brushes- Electro-motorized lower beam adjustment (S axis ...

L-beam: 40 x 5.0 (d 500) mmI - beam section - flat steel: 80 x 15 (d 700) mmI-beam section - upend: 50 x 10 (d 800) mmround material: 30.0 (d 700) mmbar material dia. max.: 60 x 2 (d 1200) mmsquare material: 50 x 30 x 3 mmrange L-W-H: 670 x 530 x 1350 mmweight: 185 kgtotal power requirement: 0.75 kW Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- robust electro-motorized ring/profile bending machine- horizontal and vertical work possible Machine head can be folded 90°- 1x freely movable foot switch- segmented standard rollers (divided)- 2x motor-driven rollers- manual delivery of the top roller- analog position display of the top rollers (scale)- manually adjustable side/straightening rollers- CE mark / declaration of conformity- Operating instructions in GermanThe data for this ad was created with ModulMWS - the sof ...

sheet width: 4100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmno. of strokes: 12 - 24 Hub/mincutting angle: 1 ° 30 work height max.: 865 mmback stop - adjustable: 1.0 - 1000 mmdown holder: 20 StückControl: ENC 100 M column arm: 50.0 mmoil volume: 200 ltrtotal power requirement: 15.0 kWweight: 11460 kgrange L-W-H: 5230 x 2250 x 2150 mm New price ~ 50,000 euros () Special price on request-----------------------------------------------------------NC electro-hydraulic swing cut shears with DURMA ENC 100 M control manual cutting gap adjustment (eccentric) including pneumatic sheet holding device for thin sheet metal cuts-----------------------------------------------------------Equipme nt:- robust electro-hydraulic swing cut shears- including DURMA ENC 100M NC control unit Back stop pre-selection - X axis Quantity Cutting length limitation Pivoting operation, left front- Monoblo ...

sheet width: 3080 mmplate thickness: 16.0 mmthickness at Niro-steel: 12.0 mmcutting angle: 0.5 - 2.5 °no. of strokes: 7 - 12 Hub/minback stop - adjustable: max. 1000 mmtraversing speed: 200 mm/sekdown holder: 14 Stückwork height max.: 840 mmColumn width: 3420 mmthroat: 350 mmControl: D-Touch 7 oil volume: 450 lengine output: 45.0 kWvoltage: 400 Vweight: 18150 kgrange L-W-H: 4130 x 2210 x 2570 mm Good / well-maintained condition () New price ~ €120.000 Special price upon requestFeatures:- Robust electro-hydraulic sheet metal shear (guided)- CNC control unit D-Touch 7 (touchscreen) Anti-reflective robust 7 color touchscreen control panel Easy positioning to the desired size Positioning accuracy 0.1 mm Unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target values Backgauge retraction function Cutting length control via adju ...

sheet width: 3060 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: 20 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °Control: ELGO Number of working hours: ~ 1.100 htotal power requirement: 11.0 kWweight: 5250 kgrange L-W-H: 3800 x 1940 x 1560 mm from a maintenance workshop with only approx. 1.100 operating hours ()Equipment:- electro-hydraulic swing beam shears- ELGO NC control unit for electric back stop Input of target/actual position value possible- NC electro-motoric back stop travel path of back stop X = 750 mm back stop ball screw with no play travel speed 100 mm/sec- electric cutting length limitation cutting length limitation to increase the number of strokes/min.- manual cutting gap adjustment, via eccentric- tip operation with push buttons on the control panel on the left- front support plates with  ...

sheet width: 2540 mmplate thickness: 2.00 mmthickness at Niro-steel: 1.25 mmno. of strokes: max. 63 Hub/mincutting angle: 1.13 Gradtable height: 750 mmtable width: 320 mmdistance between columns: 2620 mmback stop - adjustable: 5.0 - 550 mmControl: konv. engine output: 3.0 kWweight of the machine ca.: 1600 kgrange L-W-H: 3100 x 1980 x 1400 mmEquipment:- robust / motorized swing cut guillotine shears- break-proof, torsion-free steel welded construction- compact and clear machine design- manual back stop, with analogue display adjustable from the front stepless adjustment over the entire travel range- recessed grips in the support table- 1x hold-down bar- 1x side stop- 3x support arms- 1x freely movable foot switch- operating instructions (PDF) Special accessories included:- sheet metal holding device for thin sheet metal cutsThe data for this ad was created with ModulMWS - the software sol ...

sheet width - max.: 2535 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: 20 Hub/mincutting angle: 1.7 °work height max.: 900 mmtotal power requirement: 8.5 kWweight of the machine ca.: 3400 kgrange L-W-H: 2916 x 2250 x 1760 mm Machine from training workshop good / well-maintained condition ()Equipment:- robust electro-hydraulic swing cut guillotine shears- electro-motorized rear stop- electric cutting length limiter- electro-motorized cutting gap adjustment- front support table including recessed grips- 1x stable side stop, with scale and tilting cam- 3x stable, front support arms- 1x freely movable foot switch- front finger guard- EMERGENCY STOP button at the front- operating instructions Special accessories included:- pneumatic sheet holding device for thin sheet metal cutsThe data for this ad was created with ModulMWS - the ...

sheet width: 1040 mmplate thickness: 2.50 mmthickness at Niro-steel: 1.25 mmno. of strokes: max. 90 Hub/mincutting angle: 2.70 Graddistance between columns: 1060 mmwork height max.: 940 mmback stop - adjustable: max. 550 mmcolumn arm: 120 mmvoltage: 400 Vengine output: 4.0 kWweight of the machine ca.: 820 kg.range L-W-H: 1650 x 1200 x 1250 mmEquipment:- robust / motorized crank guillotine shears with motor drive- break-proof, torsion-free steel welded construction- compact and clear machine design- manual back stop, with analog position display adjustable from behind continuous adjustment over the entire travel range travel range max. 550 mm- 1x hold-down bar- 1x side stop- 1x front support arm- original operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.