Inv. Num. ： 8740 型号：VR 13-31 制片人：EHT 生成： 参数： 最大切割长度：3100 毫米 最大切割厚度：13 毫
Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible.
A hydraulic CNC press brake Eht. Press force: 230t, working length: 4550mm, distance between side frames: approx. 4050mm, max. stroke: approx. 300mm, max. installation height: approx. 500mm, max. throat depth: approx. 405mm, approach speed: approx. 100mm/s, working speed: approx. 10mm/s, return speed: approx. 100mm/s, control: Cybelec ModEva 10S, operating hours: 41789h. Including various punches and dies. Weight: approx. 23,5t, machine dimensions X/Y/Z: approx. 2400mm/5200mm/3100mm. Documentation available. An on-site inspection is possible.
液压数控压制制动器EHT出售。压力：1100kN，弯曲长度 3050mm，最小/最大桌面冲撞距离：280mm/600mm，快速接 速度：100mm/s，工作速度：2mm/s-8mm/s，返回速度：100mm/ s，后方距调节范围：5-1000mm，后方距调整速度：200mm/s ，后方距垂直调节：+/-10mm，工具与操作元件间的安全 距离：120mm，停止时间：75ms，制动距离：11mm，控制系 统：DAK 90。机器重量：8500公斤。文档可查。可预约检查
Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg
Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit
Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg
pressure: 225 t chamfer lenght: 3050 mm distance between columns: 2550 mm column arm: 300 mm ajustment speed: 110 mm/sec work speed: 9.0 mm/sec return speed: 130 mm/sec work stroke: 240 mm dayligth: 320 - 560 mm table height: 1000 mm table width: 200 mm oil volume: 350 ltr. operating pressure: max. 296 bar air pressure: 4.5 - 6.0 bar voltage: 400 Volt total power requirement: 18.5 kW weight: 14900 kg range L-W-H: 5180 x 2400 x 3100 mm - in checked condition - machine video - https://www.youtube.com/watch?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library - CNC-controlled back gauge adjustment (X-axis) Stop rang ...
2023 年翻新的 EHT 液压剪板机现已上市。切割长度：3000mm，最大板材厚 钢/VA：4mm/2mm，后挡料：10mm-1000mm，调节速度：180mm/s 行程速度：18-31 行程/分钟，油量：160l。机器尺寸 X/Y/Z：约 3700mm/2100mm/2150mm，重量：约 4800kg，运行时间：44024h。气缸、叶片和软管在 2023 年进行了大修。可以进行现场检查
Key data: 6000 mm, 4 mm
使用 autom.堆垛和运输台、光栅、切割计数器、带废料分流 、需要压缩空气 机器由专业人员进行维修、检查、清洁，然后完全正 运行。执行试运行。 板材宽度： 6000 mm 钢板厚度： l 4.0 mm 铝板厚度： 6.0 mm 前面板板厚： 2.0 mm 颜色：灰色 总功率要求：11 kw/63 A 机器重量： 19,500 kg 尺寸：6800 x 3500 x 2300 毫米 无需切割间隙调整 液压压紧装置 Brpmi77K7Oq 立柱伸出：200 毫米 切割角度调整固定：1 度 后挡料： 10 - 1000 mm 机器型号： 107640
数控冲床 制造商： EHT 类型： Strippit 1500/30 制造年份： 2000 CNC 控制：Fanuc 无更换工作区域：2500 x 1500 mm 最大材料厚度： 8 mm 冲压力：30 吨。 刀塔有 46 个刀位，包括 4 个 D 分度工位 3 个可编程爪 金属桌 专门用于单班运行 包括工具 WILSON TOOL
规格： - 最大工作长度 4050 mm - 立柱通道 3050 mm - 最大压力 110 t - 柱塞行程 200 mm - 投影 350 mm - 工作台高度 900 mm - 开口宽度 400 mm - 驱动功率 17.5 kW - 大约需要空间 宽 4250 x 高 2850 x 深 2200 mm - 重量约 15.0 吨 -跟： - 控制 CYBELEC ModEva 10 S 于 2011 年更新 - Y 1+ 2 ， X ， Z - 双手控制面板： -莫特。后挡料 5 - 1000 mm - 前支撑臂 - 分体式锐化工具， - 万能模
压力：1500 kN 弯曲长度：3550 mm 支架宽度：3044 mm 控制：Cybelec 34 PS-CN 支架放电：350 mm 柱塞行程 - 最大：220 mm 空间要求约：3200 x 4200 x 2100 m 金属板保持：后部/后部 支撑臂数量：2，可移动/可调。 换模： 液压工具夹紧： 上部工具快速更换系统： 加冕： 包括 3套工具 数据fü，此广告是用ModulMWS创建的 - LogoTech oHG的机器管理。
规格： 最大工作长度 1250 mm - 支架通道 1050 mm - 最大压力 80 t - 行程 250 mm - 立柱放电 300 mm - 工作台之间的安装高度 - 压梁 560 mm - 提升速度 - 下降速度怠速最大 100 毫米/秒 - 上升速度 100 毫米/秒 - 最大向下按压速度 12 毫米/秒 - 总驱动功率 15 kW - 空间要求约为 宽 1750 x 高 3400 x 深 2000 mm - 重量约 8500公斤 - 与： - 数控 - 控制赛贝莱克 DNC 7400 PSGY - 受控 X – 后挡风口 5 – 1000 mm - Z - 三阶段气的轴。高度可调 - 手动移动和可折叠的停止手指 - 受控气动模具位移 - 海德。刀具夹紧 - 手动加冕 - 2件式支撑臂 - 刃磨刀具开口高 320 x 长 1000 mm - 鹿脚工具高 320 mm x 长 1000 mm - 通用矩阵 L 1000 mm
压缩力：250 t 工作宽度： 3550 mm 净支架宽度： 3050 mm 支架放电： 300 mm 后挡板：是的 电气。连接： 400 V， 约 26 kW 重： 20 t 空间要求：2100 x 3800 x 3100 mm
压缩力：150 t 工作宽度： 4500 mm 净支架宽度： 3050 mm 支架放电： 300 mm 后挡风： 1000 mm 电气。连接：380 V，18.5 kW 重： 14.8 t 空间要求：4200 x 2000 x 3000/3150 mm
EHT VarioPress 175-35 数控压制器于2004年由德国EHT Werkzeugmaschinen GmbH（现为TRUMPF）制造。该机器设计用于精密加工最大 长度为3550毫米的工件。加工过程采用175吨的高压力， 结合极其稳定的设计，保证即使在最激烈的挑战中也 获得优异的弯曲效果。所有这些都由先进的CYBELEC控 系统补充，极大地便利了机器的日常运行。EHT VarioPress 压制器重14900公斤。 EHT VarioPress 175-35 压制器的技术规格 - CNC控制器：CYBELEC DNC 1200PS Eco/Col - 最大压力：175吨 - 最大钣金长度：3550毫米 - 前支撑 - 连接功率：20.5千瓦 - 电流保护：63 A - 控制电压：24 V - 电源：3 x 400 V - VarioPress 175-35 机器重量：14900 公
sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm
pressure: 150 t chamfer lenght: 3550 mm distance between columns: 3050 mm Control: Cybelec DNC 880S stroke: 700 mm throat: 350 mm dimensions: 4400x2200x3940 mm weight of the machine ca.: 15.000 kg Accessories/equipment: - Bending aid in front of the machine - Parking space for bending aid - 3 stop fingers - Control conversion 2011 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 50 t chamfer lenght: 1550 mm distance between columns: 1150 mm Control: CYBELEC DNC 1200 PS Eco column arm: 405 mm table height: 900 mm stroke of ram: 400 mm distance between table / ram: 720 mm total power requirement: 9,5 kW weight of the machine ca.: 5.200 kg dimensions of the machine ca.: 2000x1900x2920 mm Accessories/Equipment: - CYBELEC DNC 1200 PS Eco controller - 2 support arms - 4 stop fingers - Lasersafe - Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm dayligth: 320 - 560 mm stroke: 240 mm working feed: 10.0 mm/sec return speed: 150 mm/sec column arm: 400 mm work height max.: 1050 mm control: DNC 1200 PS/B operating pressure: max. 297 bar compressed air: 4.5 - 6.0 bar connected load: 15.0 kW oil volume: 250 ltr. weight: 11500 kg range L-W-H: 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - https://www.youtube.com/watch?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B Swiveling Control Panel, Front Right Numerical Programming Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) with 3x Manually Adjustable Backgauge Fingers (Z-Axis) Maximum Travel Speed: 250 mm/sec - ...
sheet width: 4050 mm plate thickness: 8 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 110 t chamfer lenght: 2550 mm Control: Cybelec DNC 70 weight: 9000 kg dimensions: 3000 x 2100 x 3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3000 mm plate thickness: 4 mm distance between columns: 3050 mm total power requirement: 8 kW weight of the machine ca.: 4.8 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 85.0 t chamfer lenght: 2050 mm distance between columns: 1650 mm column arm: 400 mm stroke: 240 mm dayligth: 320 - 560 mm ajustment speed: 150 mm/sec working feed: 15.0 mm/sec return speed: 150 mm/sec back stop - adjustable: 5.0 - 1000 mm table width: 110 mm work height max.: 1050 mm operating pressure: max. 297 bar compressed air: 4.5 - 6.0 bar oil volume: 200 l operating pressure: 340 bar total power requirement: 7.5 kW weight of the machine ca.: 5900 kg range L-W-H: 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition () - in checked condition - machine video - https://www.youtube.com/watch?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control swiveling control panel at the front right external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motor ...
sheet width: 3050 mm plate thickness: 10.0 mm thickness at Niro-steel: 6.0 - 8.0 mm down holder: 13 Stück distance between columns: 3070 mm cutting angle: 1.0 - 4.0 ° no. of strokes: ~ 22 Hub/min Control: ELGO P8511 oil volume: 240 l voltage: 400 V total power requirement: 15.0 kW weight: 8000 kg range L-W-H: 3550 x 2350 x 1900 mm good condition () from a maintenance workshop Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit P8511 - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment Front analog cutting angle display - 1x stable side fence, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x fro ...
pressure: 225 t chamfer lenght: 2050 mm distance between columns: 1550 mm control: CYBELEC DNC 1200 PS Eco stroke: 550 mm table height: 700 mm throat: 405 mm distance between table / ram: 320-870 mm column arm: 405 mm weight of the machine ca.: 14.000 kg Accessories / equipment: - controlled axes: Y1 - Y2 - X - R - Z1 and Z2 can be moved manually - Lasersafe angle measurement - Pneumatically adjustable support table - pneumatic upper and lower tool clamping - 2-hand foot control - manual crowning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3550 mm Control: CYBELEC ModEva Pac throat: 350 mm distance between table / ram: 430 mm table width: 250 mm stroke: 250 mm total power requirement: 18,5 kW weight of the machine ca.: 16500 kg dimensions of the machine ca.: 4400x2100x3200 mm Equipment/accessories: - Control conversion at the end of 2018 - Electric backgauge 1250 mm - 10-stage die displacement - crowning - EHT 26 mm tool holder - Axes controlled: Y1,Y2,X,R - Sheet metal holding table - 4x manually adjustable stop fingers - pneum. Upper tool clamping - Safety light curtain - 3x height-adjustable support arms - Oil cooler - 2-hand foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 230 t chamfer lenght: 4050 mm distance between columns: 3550 mm column arm: 420 mm oil volume: 400 l Control: ModEva 10S weight of the machine ca.: 19700 kg dimensions: 5100 x 2160 x 3420 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
