钣金加工设备 二手 出售 (3,363)

sheet width: 1320 mmplate thickness: 2.5 mm STthickness at Niro-steel: 1.2 mmblade length: 1350 mmno. of strokes: 34 Hub/minback stop - adjustable: max. 825 mmcutting angle: 1.5 °work height max.: 810 mmControl: konv. engine output: 3.0 kWweight: 1100 kgrange L-W-H: 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used () Special price upon requestFeatures:- Robust electro-mechanical sheet metal shear- Heavy-duty / robust drive motor- Manual backgauge, including analog position indicator Adjustment range max. 825 mm- Manual cutting gap adjustment- 2x table side stops including mm scale- 1x front stop bar - manually adjustable- 2x front support arms- Grip recess in the front work table- 1x freely movable foot switch, including emergency stop button- Control cabinet/operating panel - front right- Rear safety device- Rear sheet chute- Connection cable + plugThe data fo ...

sheet width: 1050 mmplate thickness: 1.0 mmdaylight opening: 95.0 mmangle adjustable from - to: 0 - 150 Gradtotal power requirement: manuell weight of the machine ca.: 180 kgrange L-W-H: 1320 x 790 x 1050 mmcharacteristics- Universally applicable bending machines for plumbing and repair shops- Simple pivoting movement of the bending beam using a bow handle- Easy adjustment of the upper beam for efficient work- High upper beam for producing high-edged profiles- The piano inserts in the upper, lower and bending beam result in a large number of bending options- Cassettes and special profiles with opposite bends are with these Models easily feasibleScope of delivery :- Segmented upper, lower and bending beam- bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 2 x 250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mmplate thickness: 2,0 mmdaylight opening: 124 mmbending angle max.: 0 - 135 °work height max.: 930 mmtotal power requirement: von Hand kWweight of the machine ca.: 1.010 kgdimensions of the machine ca.: 2,75 x 0,56 x 1,26 mcharacteristics- Easy to use swivel bending machine- Flat guide for exact movement of the upper beam- Manually adjustable bending angle using a scale- Robust welded steel construction, designed for heavy use- Large opening width for processing tall workpieces- Optionally with back gauge for series work- Quick and easy bending process using a bow handle- Workpiece clamping by means of a large leverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2,5 mmdaylight opening: 48 mmbending angle max.: 0 - 135 °total power requirement: von Hand kWweight of the machine ca.: 285 kgdimensions of the machine ca.: 1,35 x 0,82 x 1,14 mFurnishing:- Universally applicable bending machine for plumbing and repair shops- Robust construction in a modern design- Easy adjustment of the upper beam using a foot pedal- Hands are free for the workpiece- Manual bending machine for standard bending tasks- Segmented upper beam for a large number of bending options- Optimal price-performance ratio- Quick and easy bending process using a bow handle- Non-slip rubber coating on the foot pedal for safe working- Easy adjustment of the lower beam to the respective sheet thickness- High upper beam for producing high-edged profilesscope of delivery- Segmented upper cheek- manual backgauge- bending segments 25 | 30 | 35 | 40 | 45  ...

sheet width: 2040 mmplate thickness: 4.0 mm STplate thickness: 6.0 mm ALUthickness at Niro-steel: 2.5 mmdistance between columns: 2100 mmno. of strokes: ca. 32 Hub/mincutting angle: 2.0 °table height: ca. 820 mmControl: SCHRÖDER / ELGO total power requirement: 5.5 kWweight: 3250 kgrange L-W-H: 2400 x 1400 x 1100 mm From a maintenance workshop Current new price approx. 35.000 euros Special price upon requestThe MSS motorized guillotine shear was developed for sheet metal and plastic processing. With these shears, you can effortlessly produce clean cuts in series.The MSS oscillating cut is the elegant and powerful way to cut. Thanks to the oscillating cut technology, the applied force is optimally converted into a cutting movement, giving the machine power reserves.Features:- Robust, motorized swing-cut guillotine shears- Shatter-proof, torsion-free welded steel construction- Compact and ...

sheet width: 1020 mmplate thickness: 2.5 mmdaylight opening: 48.0 mmdaylight opening: 150 mm ohne Segmentebending angle max.: 0 - 135 °work height max.: 900 mmweight of the machine ca.: 340 kgdimensions of the machine ca.: 1350 x 820 x 1300 mmFurnishing:- Swivel bending machines with segm. Upper, lower and bending beam- Universally usable bending machine for sheet metal works and repair shops- Robust construction in a modern design- Easy adjustment of the upper beam using a foot pedal- Hands are free for the workpiece- Manual bending machine for standard bending tasks- Segmented upper beam for a large number of bending possibilities- Optimum price-performance ratio- Quick and easy bending process using the bow handle- Non-slip rubber covering on the foot pedal for safe working- Easy adjustment of the lower beam to the respective sheet thickness- High upper beam for the production of hig ...

sheet width: 2020 mmplate thickness: 2,0 mmdaylight opening: 122 mit Segmente mmbending angle max.: 0 - 135 °work height max.: 930 mmtotal power requirement: von Hand kWweight of the machine ca.: 1020 kgdimensions of the machine ca.: 2,75 x 0,56 x 1,26 mcharacteristics- Segmented upper beam for a large number of bending options- Universally applicable bending machine for plumbing and repair shops- High upper beam for producing high-edged profiles- Quick and easy bending process using a bow handle- Easy adjustment of the upper beam for efficient work- The bending angle is set using a scale- Individually removable segments for bending boxes- Large opening width for processing large workpieces- Robust construction in a modern designscope of delivery- Segmented upper cheek- Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mmThe data for this ad was created with Mod ...

sheet width: 1020 mmplate thickness: 2,0 mmdaylight opening: 48 mmbending angle max.: 0 - 135 °work height max.: 900 mmtotal power requirement: von Hand kWweight of the machine ca.: 285 kgdimensions of the machine ca.: 1350 x 820 x 1140 mmFurnishing:- Segmented upper and bending beam for a wide variety of bending options- Clamping by means of a foot pedal- Hands remain free for optimal positioning of the sheet- Universally applicable bending machine for plumbing and repair shops- Robust construction in a modern design- Manual bending machine for standard bending tasks- Segmented upper beam for a large number of bending options- Optimal price-performance ratio- Quick and easy bending process using a bow handle- Non-slip rubber coating on the foot pedal for safe working- Easy adjustment of the lower beam to the respective sheet thickness- High upper beam for producing high-edged profilesS ...

sheet width: 1020 mmplate thickness: 2,75 mm 400N/mm²daylight opening: 45 mmbending angle max.: 0 - 135 °weight of the machine ca.: 285 kgDescription:Swivel bending machine with patented hydraulic auxiliary cylinder andRemote control. The machine is both manual (for thinner sheets) andmotorized (for thick sheets) operated. The motorized function is overa remote control operated with an emergency stop.Version S - with segmented upper beam for boxes and special profiles- Max. Bending angle 135 °- Max. Opening upper beam 45 mm- The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported- The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated.- the motorized function is operated via a remote control with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2035 mmplate thickness: 4,5 mm STthickness at Niro-steel: 3,0 mm VAbending angle max.: 0 - 135 °daylight opening: 100 mmback stop - adjustable: 70 - 600 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4145 kgdimensions of the machine ca.: 3300 x 1550 x 1900 mmDescription .- Full hardened structure- BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand- with manual backgauge, adjustable from behind- Electronic components are quality components from SCHNEIDER- electrical cabinet is integrated in the side stand- Adjustment of the hydraulic pressure to the material thickness- Adjustment of the material thickness on the bending beam is easy with a mm scale- Handle for adjusting the material thickness on the upper beam is hidden in the side stand- Segmented upper cheek The data for this ad was cr ...

sheet width: 2540 mmplate thickness: 4,5 mm STthickness at Niro-steel: 3,0 mm VAbending angle max.: 0 - 135 °daylight opening: 100 mmback stop - adjustable: 70 - 600 mmtotal power requirement: 5,5 kWweight of the machine ca.: 6275 kgdimensions of the machine ca.: 3900 x 1700 x 1900 mmDescription .- Full hardened structure- BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand- with manual backgauge, adjustable from behind- Electronic components are quality components from SCHNEIDER- electrical cabinet is integrated in the side stand- Adjustment of the hydraulic pressure to the material thickness- Adjustment of the material thickness on the bending beam is easy with a mm scale- Handle for adjusting the material thickness on the upper beam is hidden in the side stand- Segmented upper cheek The data for this ad was crea ...

sheet width: 1050 mmplate thickness: 1.50 mmdaylight opening: 100 mmbending angle max.: 135 °height: OW 100 mmtotal power requirement: manuell weight of the machine ca.: 330 kg.dimensions of the machine ca.: 1600 x 900 x 1450 mmEquipment:- robust, manual swivel bending machine- divided upper tool - lower and rear tool Height of upper tool = 100 mm Division 100/100/100/100/100/100/100/70/60/50/40/30/100 left + right with horn tool- upper tool with quick-change system- quick foot clamp- angle stop - lockable- manual rear stop 500 mm- machine can be moved (rollers)- accessories box - rear Pictures show identical machine (UFA 1212)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板厚：2.0 毫米管径：60.0 毫米电机：400 伏此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案�

plate thickness: 1,50 mmblade length: 150 x 150 mmtable:: 457 x 305 mmcutting angle: 90 °adjustment of stroke: 20,0 mmweight: 73,0 kgrange L-W-H: 460 x 630 x 1150 mm- Notching with a burr-free cut, without deformation of the cut edges- For punching out corners, shapes, etc. up to a maximum of 150 x 150 mm- Body made of high-quality gray cast iron for precise work- Blades made of surface-hardened tool steelFurnishing:- manual notching machine- 2x material stops- Scales support tables- hand leverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6,5 mm ST 40: 3,5 mm VA: 90° Gradblade length: 250 x 250 mmtable:: 810 x 750 mmwork height max.: 950 mmengine output: 4,0 weight: 630 kgrange L-W-H: 810 x 750 x 1150 mmCharacteristics :- Notching with a burr-free cut, without deformation of the cut edges- Blades made of surface-hardened tool steel- Operation by means of a foot pedal, so both hands are free for the workpiece- Large dimensioned work table with built-in scales- T-slots for precise guidance of the swiveling stops- Protective cover in front of the cutting blade for high securityscope of delivery- 1 set of cutting knives- 2 swiveling material stops- Plexiglas protective cover- Foot pedal with emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6.0 mm ST 40: 3.0 mm VA: 30 - 140 Gradblade length: 200 x 200 mmtable:: 900 x 990 mmwork height max.: 940 mmPunching capacity: 35.0 in 6.0 mm ST 40Throat / punching unit: 135 mmengine output: 4.0 kWweight: 1020 kgrange L-W-H: 900 x 990 x 1200 mmCharacteristics :- Notching with a burr-free cut, without deformation of the cut edges- Blades made of surface-hardened tool steel- Operation by means of a foot pedal, so both hands are free for the workpiece- Large dimensioned work table with built-in scales- T-slots for precise guidance of the swiveling stops- Protective cover in front of the cutting blade for high securityscope of delivery- hydraulic Notching machine with adjustable angle & punching station- 1 set of cutting knives- Round punch with die 12 mm- 2 swiveling material stops- Plexiglas protective cover- Foot pedal with emergency stopThe data for this ad was created with ModulMWS - ...

: 3.0 mm ST 40: 2.0 mm VA: 90.0 Gradblade length: 130 x 130 mmtable:: 640 x 460 mmwork height max.: 900 mmengine output: pneumatisch weight: 200 kgrange L-W-H: 600 x 670 x 1270 mmProperties:- Notching with burr-free cut, without deformation of the cutting edges- Machine body made of high-quality gray cast iron, base made of sheet steel- Cutting blades made of surface-hardened tool steel- Effortless work thanks to pneumatic drive- Operation using a foot pedal, so both hands are free for the workpiece- Large work table with integrated scales- T-slots for precise guidance of the pivoting stops- Protective cover in front of the cutting blade for high safetyScope of delivery- 1x set of cutting blades- 2x pivoting material stops- Plexiglas protective cover- Foot pedal- Base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.25 mmthroat: 250 mmdistance between roll centers: 62.0 mmengine output: 0.7 kWweight: 170 kgrange L-W-H: 700 x 600 x 1300 mm Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- 4x pairs of beading and flanging rollers included in delivery- robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- for the economical production of a wide variety of bead types- high accuracy thanks to precision-mounted shafts- Clearly arranged switching elements- Base frame equipped with storage compartment- powerful drive motor, even under continuous load- mobile foot switch for clockwise and counterclockwise rotationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mmthroat: 260 mmdistance between roll centers: 92.0 mmweight: 295 kgrange L-W-H: 1200 x 700 x 1200 mm Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- 3x pairs of beading and flanging rollers included in delivery- robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- for the economical production of a wide variety of bead types- high accuracy thanks to precision-mounted shafts- Clearly arranged switching elements- Base frame equipped with storage compartment- powerful drive motor, even under continuous load- mobile foot switch for clockwise and counterclockwise rotationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 45.0 tchamfer lenght: 2050 mmdistance between columns: 1600 mmcolumn arm: 300 mmstroke: 150 mmdayligth: 395 mmajustment speed: 100 mm/secworking feed: 1-10 mm/secreturn speed: 70,0 mm/sectable width: 60,0 mmtable height: 905 mmoil volume: 150 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 5,5 KWweight of the machine ca.: 3500 kgrange L-W-H: 2900 x 2100 x 2420 mm good / well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=f0lMBgZD1VUFurnishing:- DELEM CNC control model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library including new screen (installed 11/2023 .. 1.200 euros)- CNC controlled axes: Y1 + Y2 / X / R axis- CNC controlled back gauge (X axis)- CNC controlled height adjustment from the back gauge (R axis)- manual adjustment of the 2x stop fingers (Z a ...

plate thickness: 4.0 mmthroat: 260 mmdistance between roll centers: 132 mmstroke: 55.0 OW mmtool adaptor: Ø 35 mm, 12 mm Nut mmtotal power requirement: 3.0 kWweight of the machine ca.: 450 kg.range L-W-H: 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- 3x pairs of beading and flanging rollers included in delivery- robust beading machine with motor-driven rollers- hydraulic adjustment of the upper roller, with pressure gauge- Lower shaft with adjustable stop- for the economical production of a wide variety of bead types- high accuracy thanks to precision-mounted shafts- Clearly arranged switching elements- Base frame equipped with storage compartment- powerful drive motor, even under continuous load- mobile foot switch for clockwise and counterclockwise rotationThe data for this ad was created wit ...

plate thickness: 1.20 mm STShaft length: 140 mmroll diameter: 62.0 mmthroat: 100 mmroll speed: 16.0 + 32.0 U/minengine output: 0.75 kWweight: 135 kgrange L-W-H: 900 x 450 x 1350 mm Display machine - like new Never been used () Special price upon requestFeatures:- 8 pairs of beading and flanging rollers included- Robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- For economical production of a wide variety of bead types- High accuracy thanks to precision-mounted shafts- Clearly arranged control elements- Manual adjustment of the upper roller- 2 bending speeds- Powerful drive motor, even under continuous load- 1 mobile foot switch for forward and reverse rotation- Machine base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 90.0 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/secback stop - adjustable: max. 750 mmstroke: 260 mmdayligth: 460 mmtable height: 880 mmoil volume: 200 ltr.total power requirement: 7.5 kWweight of the machine ca.: 7500 kg.range L-W-H: 4250 x 1800 x 2450 mm good condition - with 1x set of new bending tools () current new price approx. 80.000 euros special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=Xlb8EgQ8088Equipment:- electro-hydraulic CNC press brake- with DELEM CNC control model DA 66W graphic 2D programming automatic bending sequence calculation and collision detection high-quality color LCD screen (TFT)- swiveling operation, front left- CNC controlled axes: Y1 + Y2 + X + R- CNC electro-motorized back stop (X axis) with 4x man ...

plate thickness: 2.5 mm STshaft length: 250 mmroll diameter: 96.0 mmthroat: 160 mmroll speed: 6.0 + 13.0 U/min.total power requirement: 1.5 kWweight: 350 kgrange L-W-H: 1400 x 550 x 1120 mm Display machine - like new Never been used () Special price upon requestFeatures:- 4x pairs of beading and flanging rollers included- Robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- For economical production of a wide variety of bead types- High accuracy thanks to precision-mounted shafts- Clearly arranged control elements- Manual adjustment of the upper roller- 2x bending speeds- Powerful drive motor, even under continuous load- 1x mobile foot switch for forward and reverse rotation- Machine base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm STshaft length: 140 mmroll diameter: 62.0 mmthroat: 100 mmtotal power requirement: manuell kWweight of the machine ca.: 50.0 kgdimensions of the machine ca.: 560 x 220 x 500 mm Display machine - like new Never been used () Special price upon requestDescription:- 8 pairs of beading and flanging rollers included- For the economical production of a wide variety of bead types- High accuracy thanks to precision-mounted shafts- Lower shaft with adjustable stop- Sturdy cast iron construction with a modern design- Expanded application range thanks to 8 different, optionally available roller pairs- Adjustable upper shaftThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm STSeam/fold length: 1300 mmdiameter: min 130 / max 1000 mm0: 8.0 barContact pressure: 1000 kgtotal power requirement: 0.37 kWweight of the machine ca.: 300 kgdimensions of the machine ca.: 1720 x 900 x 1650 mm Display machine - like new Never been used () Special price upon requestFeatures:- Electro-pneumatic pneumatic press- For closing folded edges- Easy operation- Pneumatic system equipped with air filter- Hardened folding rollers- 1x freely movable foot switch with emergency stop- Original operating instructions + CE declarationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mmthroat: 270 (140) mmdistance between roll centers: 60.0 mmtotal power requirement: manuell kWweight of the machine ca.: 46.0 kgdimensions of the machine ca.: 600 x 250 x 500 mmFurnishing:- various replacement rollers- hand crank- front stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdown holder: 18 Stückno. of strokes: 15 Hub/minoil volume: 150 ltr.cutting angle: 1,2 °control: CYBELEC Cybtouchback stop - adjustable: 1000 mmwork height max.: 800 mmengine output: 11,0 kWweight: 8.100 kg.range L-W-H: 5000 x 2410 x 1650 mm-------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------Furnishing: - CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trave ...

sheet width: 2040 mmplate thickness: 3.0 mmthickness at Niro-steel: 1.5 mmno. of strokes: 50 Hub/mincutting angle: 1.4 Gradtable height: 750 mmdistance between columns: 2120 mmback stop - adjustable: 1.0 - 550 mmcolumn arm: 100 mmControl: manuell engine output: 5.5 kWweight of the machine ca.: 2050 kg.range L-W-H: 2600 x 1980 x 1400 mmFurnishing:- robust / motorized swing-cut guillotine shears- Shatterproof, torsion-free steel welded construction- compact and clear mechanical design- manual backgauge, with analogue position display adjustable from the front Continuous adjustment over the entire travel range Adjustment range 1.0 - 550 mm- Machine side stand with projection .. 100 mm- manual cutting gap adjustment- 1x hold-down bar- 1x long side stop- 2x support arms- 1x freely movable foot switch- rear sheet metal slide- 2x EMERGENCY stop buttons at the front- Connection cable including p ...

pressure: 60.0 tchamfer lenght: 2100 mmdistance between columns: 1700 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmoil volume: 150 ltr.voltage: 400 Volttotal power requirement: 7.5 kWweight: 5640 kgrange L-W-H: 3250 x 1960 x 2750 mm-------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA 53T (touchscreen)- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 stop fingers- controlled axes Y1 - Y2 - X - R - C (crowning)- electr. Crowning controlled by CNC- Upper deer foot tool with PS 135.85-R08, system A with quic ...