plate width: 3200 mm plate thickness: 83 mm pre-bending: 72 mm roll diam. toproll: 700 mm roll diam. bottom roll: 650 mm side roll diameter: 550 mm distance between columns: 3300 mm roll drive: 93,2 kW turning speeds: 2 - 4 m/min total power requirement: - kW weight of the machine ca.: 78 t dimensions of the machine ca.: 9 x 3,3 x 3,4 m 4 –Roll Bending Machine - 4 roll Pinch bending - Pre-bending - Tilting function -- Hydraulic front bearing tilting speed: 450mm/min -- Hydraulic tilting of top roll: 250mm/min - CE 2 Units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3000 mm, 40 mm, 35 mm
板弯机 FACCIN——4辊液压机 3000 X 40 毫米 - 型号4HCI3-35/30 1990年 板弯辊线性导轨双初始捏合 机器使用良好状态 弯曲能力 -板宽：3000毫米 - 轧制板厚度 40 毫米 - 预弯厚度：35毫米 辊数尺寸：-有效长度3050毫米 - 中央卷轴上下D，470毫米 -左右滚动 D 420 毫米 • 4辊高强度表面的硬化 • 3辊驱动液压驱动齿轮单元 • 锥形弯曲附着侧辊，可倾斜形成锥形，对比垫滚轮型 • 打开顶辊液压下落端，卸载板材全圆闭合。 • 变速工作辊、弯曲、旋转、液压速度快/慢。 • 带中央控制杆的电动轮式控制台，配备中央控制摇杆 数字显示，三轴。 • 滚轮位置的数字显示，用于弯曲和预弯工作，实现重 性。 ...
Faccin HAV 3162液压板压光机的技术数据： 上辊直径： 620 mm 侧滚轮直径： 550 mm 机械尺寸： 8600 x 3500 x 3700（h） mm 重量： 90.000 kg
使用的 3 辊板 Faccin HAV 3172 液压格栅的技术数据： 上辊直径： 720 mm 侧滚轮直径： 650 mm 电源： 380V - 50Hz 机械尺寸： 8600 x 3500 x 3700（h） mm 重量： 90.000 kg
板材宽度：3554 mm 板材厚度：42 mm 弯曲：36 mm 控制： 总功率要求：kW 机器重量 约：49 t 空间要求 约：7.3x2.4x2.5 m 轴承编号2210024 机器类型 4 辊 CNC 钣金折弯机 制造 FACCIN 型 4HEL 3554 建造年份 2000 控制类型 CNC 附加信息 盖 3554 x 42 mm 弯曲最大 36 mm 顶辊直径 540 mm 底部卷直径 530 mm 页面罗尔迪亚姆。430 毫米 55 千瓦 长x宽 x 高 = 7350 x 2400 x 2500 毫米 机器重量 49 吨 数据量，此广告是使用 ModulMWS 创建的 - LogoTech oHG 的机器管理。
板弯曲机 FACCIN - 4 辊液压 3000 X 40 毫米 - 型号 4HCI3-35/30 年 1990 /2025 弯板辊直线导轨 双夹 预弯 机器工作状态良好 弯曲能力 -板宽 ： 3000 毫米 -滚动板厚度 40 毫米 - 预弯厚度 35 mm 卷尺寸： -有效长度 3050 毫米 -中央辊上/下 D 470 毫米 -侧辊左/右 D 420 mm • 4 辊高强度表面的硬化 • 3 个辊子驱动，由带液压马达的减速机提供动力 • 锥形弯曲附件侧辊可倾斜形成锥体，对比垫辊类型。 • 打开前液压落液端以卸载封闭的外壳。 • 变速工作辊弯曲旋转液压速度快/慢。 - 带轮子的电动控制台，带有集中命令、纵杆和 3 个数字读数。 • 辊子位置、弯曲和预弯曲可重复性的数字读数。 • 液压油箱容量 350 ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 20 mm : 20 mm : 12 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 28 mm : 28 mm : 22 mm : 26 mm : 23 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 25 mm : 25 mm : 16 mm : 20 mm : 18 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 16 mm : 16 mm : 10 mm : 13 mm : 11 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 7 mm : 7 mm : 4 mm : 5 mm : 5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 8 mm : 8 mm : 4.9 mm : 6 mm : 6 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 14 mm : 14 mm : 8.4 mm : 10 mm : 9 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 1500 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 22 mm : 22 mm : 16 mm : 19 mm : 17 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4.5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 12 mm : 12 mm : 6.5 mm : 8 mm : 8 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
