磨床 二手 出售 (2,505)

grinding length: 750 mmgrinding width: 500 mmworkpiece height: 500 mmtotal power requirement: 50 kWweight of the machine ca.: 5000 tGrinding length, max. 750 mmGrinding width, max. 500 mmCross movement of grinding slide 450 mmWorking height under grinding wheel, max. 500 mmGrinding wheel size Æ 400 x 100 mmGrinding wheel speeds, infinitely variable 300-3,000 rpm Table speed, hydr. 0 - 30 m/minTable speed, creep feed 0.02 - 1,000 mm/minVertical infeed, infinitely variable 0.002 - 0.03 mm/strokeGrinding spindle drive, max. 32 kWTotal electrical load, approx. 50 kW - 380 V - 50 Hz Weight approx. 5,000 kgAccessories / Special Features Creep feed: Electro-mechanical feed (but also ...

working area: 225 mmtable-size: L:550 mmtable-size: B:200 mmsanding disc diameter: 200mm mmmagnetic plate size: 500 mmweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2000x1600x2100 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 250 mmcentre distance: 0 mmhoning length max.: mmmax. module: 5 Gear Ø, min./max. 10 / 250 mmModule range 1 - 5Length of teeth / max. table stroke 500 mmHeight of centres of tailstocks 220 mmMax. weight of workpiece 50 / 100 kgHoning head swivelling +/- 35 °Speeds of honing tool 20 - 500 rpmSize of honing tool, Ø x width 300 x 40 mmWorkpiece speeds 500 - 3,000 rpmTotal adjustment of cross slide 270 mmRapid traverse of cross slide 50 mmInfeed travel of cross slide, mechanical 1 - 8 mm/ØRoughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/secTable speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 HzWeight 3,200 kgAccessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch, as well as b ...

max. wheel diameter: 0 mmgear width: 120 mmmax. module: 3 min. module: 1 total power requirement: 20 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: m: : : : : : 5 machines in stock,YOM: between 1986 and 1990Gear Æ, min./max. 55 / 120 mmGear Æ for shaft-formed parts 80 mmModule (pitch 25.4 - 8.5) 1 - 3 No. of teeth, min./max. 13 / 80 Pressure angle 14 - 30 °Helix angle, max. 40 °Workpiece clamping length 145 - 420 mmGrinding worm Æ 300 - 400 mmGrinding worm width 25 - 40 mmGrinding worm speeds, infinitely variable (35 m/s) 1,650 rpmFeed range  ...

控制：FANUC 动力伴侣液压：。研磨长度：800毫米，研磨宽度：400� ��米，主轴中心至工作台距离：650毫米，研磨速度-无� ��-：30米/矿井研磨轮尺寸：350 x 50 x 127毫米，机器重量约3.5，机器尺寸约3.3 x 2.3 x 2米。本广告数据由LogoTech oHG的软件解决方案ModulMWS创建�

Dimensions (L/W/H): 2450x820x1380 mmWeight: 1500 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x900x1350 mmWeight: 300 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mmWeight: 1500 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 450 mmgrinding length: 1000 mmcentre height: 225 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFotos von bereits gelieferten Maschinen.Mechanische Überholung:-komplette Maschine nach Kellenberger Messprotokoll überholt-Neue servicefreundliche Kabine-NeulackierungElektrische Überholung:-FANUC Steuerung mit BLUE-SOLUTION-Neu aufgebauter Schaltschrank-Neue Antriebstechnik-Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc.-Neue Absolut-Glasmaßstäbe in x- und z-Neuer Absolut Drehgeber (Bei-B-Achse)Fotos von bereits gelieferter Maschine mit anderen Optionen.Schleikopfvariante UR/RS:-Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander!-Dadurch jeweils 400mm Scheibendurchmesser!-Dadurch wesentlich geringere Kollisionsgefahr-Einfacheres programmieren-Schleifscheibenausrüstu ...

grinding length: 600 mmgrinding width: 400 mmworkpiece height: 350 mmtable-size: 820 x 350 mmdist. center of grinding spindle - table: 140-525 mmtable movement: 660 mmworkpiece weight max.: 400 kgdiameter / bore of grinding wheel: 350 x 50 x 76,2 mmtable speeds: 2-28 m/minpower capacity - grinding motor: 3,7 kWtotal power requirement: 8 kWweight of the machine ca.: 2100 kgdimensions of the machine ca.: 4,5 x 3 x 2,4 mGeipel & Hotz FS 60 AC surface grinder, built in 2001, in good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 350 mmworkpiece height: mmtable surface area: 1720 x 400 mmdimensions of grinding wheel: 400 x 50 x 127 mmtable height over floor: mm: 600 x 300 mmgrinding spindle speed: 3000 U/mintable load capacity: kptotal power requirement: kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 3,0 x 2,0 x 2,2 mSurface grinding machine- Magnetic grinding wheel- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

研磨长度：500毫米，研磨宽度：230毫米，table尺寸：51 0 x 200毫米，研磨轮直径：225毫米，机器重量约1.5吨。磁� ��板 1000x500mmwww.marcels-maschinen.ch 本广告的数据使用ModulMWS——LogoTech oHG的软件解决方案创建�

内部研磨主轴：。中心高度：240毫米，研磨长度：2500 毫米，砂轮直径：750毫米，尺寸（长/宽/高）：6000 x 3000 x 2500毫米，机器重量约9吨。内部研磨附件带研磨 spindleMisc.accessorieswww.marcels-maschinen.ch 本广告的数据由LogoTech oHG的软件解决方案ModulMWS创建�

最大打磨长度：406毫米，研磨直径：1.5 - 165毫米，主轴转速范围：200-2500 U/机器最小重量，约0.6 机型尺寸：1.3 x 1.35 x 1.5 m。本广告数据由ModulMWS——LogoTech oHG的软件解决方案——创建�

磨削长度最大：406毫米，磨光直径：1.5 - 165毫米，主轴转速范围：200-2500 U/机器最小重量，约0.48 机器尺寸：约1.3 x 1.35 x 1.5米 本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

研磨长度：700毫米，研磨宽度：550毫米，工件高度：5 00毫米——表尺寸：1320 x 500毫米，研磨轮直径：400毫米，机器重量约3.9吨。磁� ��板 1000x500mmwww.marcels-maschinen.ch 本广告的数据使用ModulMWS——LogoTech oHG的软件解决方案创建�

钢缸径容量（直径）：- 直径：- 行程毫米，总功率需求：千瓦，机器重量约：400公斤� ��机器尺寸约：平方米本广告数据由ModulMWS创建——Log oTech oHG的软件解决方案�

条带宽度：75毫米波段 长度：2000毫米波段 速度：m/最小总功率需求：千瓦，机器重量约：90公斤 ，机器尺寸约：m本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

研磨直径：- 毫米研磨长度：- 毫米中心高度：- 毫米，机械中心距：2000毫米，机器重量约7.9吨本广告 数据由ModulMWS创建——LogoTech oHG的软件解决方案�

研磨直径：- 毫米研磨长度：- 毫米中心高度：- 毫米，机械中心距：2000毫米，机器重量约7.9吨本广告 数据由ModulMWS创建——LogoTech oHG的软件解决方案�

charge load: . : . diameter: . mmserial number: MP-70-3-4-98-A1 Job No.:: 4813 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: . Diameter: . mmDiameter: Bechälter 1700 mmserial number: MP-70-3-4-99-A1 : 5221 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mmcentre height: 150 mmControl: FANUC grinding wheel size: max. 400 x 63 x 127 mmworkpiece weight: 120 kgengine output: 7,5 kWturning speed range - grinding wheel: 45 m/s m/sswivelling range: +45/-15° Gradwork piece spindle speed: 22-313 / 51-750 U/minworkpiece spindle swivable +/-: 90 °tailstock quill taper MT: MK 4 x-travel: 355 mmz-travel: 4,0 mmWorking speed: 0 + 7,5 m/minweight of the machine ca.: 4,0 tdimensions of the machine ca.: BTH 3,7 x 2,2 x 1,9 m-incl. Coolant system-incl. Lynette-incl. Sharpening diamond-incl. open Lynette-incl. 3 pieces of grinding discs-incl. 3 pieces of flanges-incl. Internal grinding spindle attachmentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mGENERALÜBERHOLT Foto von ähnlicher bereits gelieferter Maschine- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N- B-Achse- Kel-Set- hydraulischer Pinolenrückzug- Mikroverstellung am Reitstock- Werkstückspindelstock mit schwenkbarem Unterteil- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, P ...

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mTeilüberholte Maschine mit Messprotokoll nach NeumaschinentoleranzNEUE Steuerung Eckelmann ENCmit BEMA SchleifsoftwareKEL-ASSIST für Kelco 90numerisch gesteuerte B-AchseInnnschleifrinrichtung Dia 80mmSchleifscheibe links Durchmesser 400mmSchleifscheibe rechts Durchmesser 300mmInnenschleifspindel HJN 828hydraulischer ReitstockMikroverstellungKEL SET MesssystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Internal grinding machine: grinding diameter: 300 mmgrinding depth: 300 mmTravel distance - Z1: 470 mmTravel distance - X1: 200 mmTilt angle - B2: 1/1000 °power capacity: 3,5 kWExternal and face grinding unit (Z2/X2): Travel distance - Z2: 470 mmTravel distance - X2: 325 mmDrive power – External grinding spindles: 16,5 kW: 120 mmgrinding diameter - cylindrical: 400 mmsanding belt length: 400 mmgrinding wheel size: Ø 500 x 50 x Ø 127 mmWorkpiece spindle unit: Travel distance - U: 470 mmTilt angle – B1 with longitudinal adjustment: -1/+12 °Tilt angle - B1 with workpiece spindle unit: -20/+30 °Manual longitudinal adjustment of the workpiece sp: 470 mmDrive power – workpiece spindle: 3,8 kWturning speeds: 1-895 U/minLoad capacity - Spindle head: 200 kgCentre height above the swing bridge: 200 mmtotal power requirement: 47 kWweight of the machine ca.: 10 tdimensions of the machi ...

研磨直径：- 毫米研磨长度：- 毫米中心高度：- 毫米直径：- 毫米长度：- 毫米工具适配器：总功率需求：千瓦，机器重量，约� ��机器尺寸，约：米本广告数据由ModulMWS创建——LogoTe ch oHG的软件解决方案�