焊接设备 二手 出售 (1,672)

table length: 1300 mmtable width: 800 mmtable height: 920 - 1000 mm: 1000 kgheight of stroke: 510 - 1550 mmtotal connected load: 1,5 kWconnected load frequency: 230 Vweight of the machine ca.: 0,55 tWelding table on lifting table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmRibbed bottom for reinforcement.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 550 mmtable load: 500 Kgswivelling range: 135 Gradtilt adjustment: manually/mechanicall: motorisch turning speeds: max. 5 U/min stufenlostable load capacity: 250 kg. vertikaltotal power requirement: 0,8 kWweight of the machine ca.: 245 Kgdimensions of the machine ca.: 820 x 730 x 710 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

最大重量： 2,2 t工件直径： 101 - 1524 mm无级可调进给速度： 0 - 3600 mm/min齿轮直径： 254 mm齿轮宽度： 76 mm总功率要求： 0,5 kW机器重量 CA.： 0,245 t机器尺寸 CA： 1,02 x 0,82 x 0,5 m

最大重量： 1000 公斤工件直径： 20 - 800 毫米滚筒直径： 200 x 50 毫米进给量： 50 - 2000 毫米 /分钟重量： 65 公斤总功率要求： 0.6 kW机器尺寸 大约： 0.8 x 0.6 x 0.6 米滚轮滑轮 - 割炬三脚架- 速度无级可调 - 脚踏开关- 英文用户手�

table length: 2990 mmtable width: 1490 mmtable height: 850 - 900 mmweight of the machine ca.: 0,8 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.The table can be moved with a pallet truck.Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 1,1 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 17-19.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,Side walls 150mm with parallel hole arrangement in a 25 mm grid.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.Other dimensions available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 77 Positionenweight: 146 kgcondition: neu : 28 mmSet 3: 77 pieces, 28mm system, consisting of:Ferrules: 10 x 280610.NFerrules: 6 x 280630.NPrism: 4 x 280648.1.NBolt: 24 x 160511Magnetic bolts 4 x 280740Stop: 8 x 280410.NStop: 8 x 280420.NAngle: 6 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280166.NAngle: 1 x 280167.NAccessory set. 1 x 283999Price information plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

焊接电流：最大 300 A开路电压：55 - 76 V连接负载频率：400 V重量：150 kg尺寸（长x宽x高）：900 x 400 x 900 毫米惰性气体保护焊机配件：软管包 4m。接地电缆 4m 惰性气体焊接机配件：软管包 4m。地线 4m

clamping range of chuck: 80 - 280 mmheight: 67,5 mmdaylight: 100 mmexternal diameter: Futter 300 mmexternal diameter: Spannhebel 480 mmweight: 13 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 600 mmtable load: 0,6 tswivelling range: 0 - 90 Gradturning speeds: 0,1 - 1,8 U/minmax. torque on the faceplate: 450 Nmtable pass: 80 mmwelding current: 500 Amperetotal power requirement: 0,18 + 0,18 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable load: 600 Kgswivelling range: 0 - 135 Gradturning speeds: 0,1 - 2,0 U/minheight adjustment: 850 - 1300 mmmax. torque on the faceplate: 900 Nmengine output: 0,37 / 0,37 kWwelding current: 500 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmtable load: 5 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 10000 Nm0: 1,5 / 1,5 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 Positionenweight: 35 kgBasic set 2 / 32 piecesfor table top thickness 15 and 25 mm6 pieces screw clamps12 pieces quick clamping bolts2 pieces universal stop 100 mm4 pieces universal stop 150 mm2 pieces universal stop 225 mm2 pieces stop and clamping angle 175 mm1 piece hole brush 300 mm1 piece burner holder1 piece non-stick spray 500 ml, natural, biologically based1 piece welding table cleaner 500 ml, natural, biologically basedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mmtable load: 0,5 tswivelling range: 0 - 135 Gradturning speeds: 0,2 - 3 U/minheight adjustment: 400 - 900 mmboring diameter: 100 mmwelding current: max. 500 Amperetotal power requirement: 0,75 kWincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,18 tdimensions: 1,2 x 0,8 x 0,85 mSpecial offer ! Siegmund Workstation incl. 2 drawers + tool set BThrough hardened tool steel, bore Ø 16 mmHoles surface 50x50 mm grid, material thickness approx. 11.5 - 13 mm.Consisting of:1x 004002 (Siegmund Workstation)1x 164004.X07 (perforated plate)1x 164030 (clamp holder)1x 004020 (shelf)1x 164035 (bolt and prism holder)1x 004025 (tool wall including shelf)2x 004210 (drawer)4x 160620 (clamp)8x 160511 (double quick release bolts without groove)6x 160412 (stop)2x 160108.N (angle)1x 160852 (Allen key)1x 164301 (vice)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2500 mmtable load: 20,0 tswivelling range: 0 - 135 Gradturning speeds: 0,04 - 0,4 U/minmax. torque on the faceplate: 40000 Nmtable pass: 200 mmwelding current: 1000 Amperetotal power requirement: 5,5 + 11,0 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,261 tdimensions: 1,2 x 1,2 x 0,85 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mmtable load: 1,0 tswivelling range: 135 Gradturning speeds: 0,12 - 1,2 U/min: 820 mmwelding current: 500 Amperetotal power requirement: 0,75 + 0,55 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 1,5 x 1,0 x 0,9 m• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table load: 500 Kgtable load capacity: 250 kg. vertikaltable diameter: 550 mmswivelling range: 135 (-45 - +90) Gradturning speeds: 0 - 5 stufenlos U/minconnected load frequency: 230 Vtotal power requirement: 0,8 KWweight of the machine ca.: 0,255 tdimensions of the machine ca.: 0,82 x 0,73 x 0,71 mWelding turntable with- large passage 165mm- Footswitch- tilt by motor- Speed infinitely adjustable- 250 amp welding current transmissionDemonstration machine documentation only in English.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,32 tdimensions: 1,2 x 1,2 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 tworkpiece diameter: 750 - 5000 mmdrum diameter: 480 x 180 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1200 x 1200 mmtable load: 10000 Kgswivelling range: 105 Gradturning speeds: 0,07 x 0,6 U/minheight adjustment: 1450 - 2450 mmhollow spindle diameter: mmwelding current: 1000 Amperemax. torque on the faceplate: 20000 Nmtotal power requirement: 12,1 kWdimensions of the machine ca.: mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The data for thi ...

table length: 2400 mmtable width: 1200 mmtable height: 850 - 900 mmweight of the machine ca.: 0,65 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.The table can be moved with a pallet truck.Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 3,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 6000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,1 + 2,2 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 tworkpiece diameter: 600 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 tworkpiece diameter: 250 - 2500 mmdrum diameter: 250 x 100 mmfeed: 100 - 1000 mm/mintotal power requirement: 0,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 100 tworkpiece diameter: 1000 - 6300 mmdrum diameter: 500 x 240 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 80 tworkpiece diameter: 850 - 5500 mmdrum diameter: 450 x 240 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 300 mmtable load: 50 Kgswivelling range: 90 Gradturning speeds: 1 - 12 stufenlos U/mintable load capacity: 50 kg vertikaltotal power requirement: 0,22 kWweight of the machine ca.: 0,036 tdimensions of the machine ca.: 0,45 x 0,43 x 0,38 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2900 mmtable width: 1200 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,77 tdimensions: 2,9 x 1,2 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.