焊接台 (102)

Lg.Nr 26071 技术数据： - 载重能力 650 千克 - 面板尺寸：700 x 700 毫米 - 面板 mot。无限可倾斜 0 - 135 ° - MOT。旋转机芯无限调节，转速0.07 - 1.5转/分钟 - 水平位置的桌面高度：890毫米 - E. 控制键 - 空间需求约宽850 x 高890 x 宽 1200毫米 - 重量约400 公�

Welding Table Type: Welding table Finish: Anti-corrosion paint or powder-coated finish Flatness: ≤ 0.2 mm/m Hole diameter: Ø 14 mm – 22 mm (depending on model) Standard spacing: Square grid (e.g. 100 mm x 100 mm) or rectangular pattern Maximum evenly distributed load: approx. 1,500 kg – 3,000 kg or higher Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-44

Lg.Nr 25075 莫特。焊接旋转和倾斜工作台 规格： - 负载能力 1000 kg - 面板直径 800 mm - 面板可通过电机倾斜 - 旋转运动电动。无级变速 0 - 250 cm/min - 焊接电流传输 650 A - 驱动 400 V / 2.8 kW - 水平位置的工作台高度约为 1100 毫米 - Re- + 逆时针旋转 - 空间要求 宽 1200 x 高 1100 x 深 1500 毫米 - 重量约 850 千克

Technical equipment: Manufacturer Extraction arm: Plymovent Machine type: Soldering and welding booth / manual workstation Worktop: Steel worktop with perforated grid Suction: 1x Plymovent suction arm with capture hood Monitor: 1x flat screen monitor Scanner: 1x Barcode Scanner Torch: 1x Soldering/Welding Torch Media supply: 1x media plate with gas, compressed air and supply connections Air gun available Protective cladding made of aluminium profiles and transparent protective screens Industrial Aluminum Profile Frame Auction-ID: A1-49884-60

Key data: 1180 mm, 990 mm, 765 mm

重型焊接和夹紧台 1,180 x 990 毫米 高度 765 毫米 夹紧槽宽度 34 mm 材料厚度 40 毫米 重量约 1,020 kg

Auction-ID: A1-49846-18

机器类型：焊接转盘 制造：美库尔/康泽尔曼 型号 CD 50/25 - 320 连接电压 1 x 230 V 速度范围 0.25 – 2.5 rpm，无级变速 速度控制 1 ： 10 扭矩 2.5 – 10 Nm 面板直径 250 mm 面板 - 内部通道 10 mm 面板倾斜角度 135 垂直负载能力 0.5 kN = 50 kg 工作台高度 320 mm 手动倾斜运动，可夹紧 倾翻扭矩 90 Nm 受电弓 400 A 80 % 直流 连接方式 - 脚踏开关简单 - 双脚踏开关 - 脚遥控 年龄 3 岁 条件：和新的一样好 重量 44 kg 保修期为自交货之日起24个月 原价 €2，198.00 + 增值税 报价 €1，690.00 + 增值税 脚踏开关简单，带 3 米电缆 239.00 € + 增值税 019.0.2900 带 3 米电缆的双脚踏开关 389.00 € + 增值税 019.0.2901 带 5 米电缆的脚踏遥控器 529.00 € + 增值税 N019 ...

Auction-ID: A1-49846-19

焊接排烟台 焊接台DCE UMA150HG5除尘 带集成吸入器的焊接工作台，带过滤器 制造商粉尘控制设备除尘器 型号 UMA 150H G5 根据照片休息

Auction-ID: A1-49846-17

规格： - 负载能力定位表约 750公斤 - 面盘直径 500 mm - 工件直径 1600 mm - 高度转盘，水平位置约为 750 毫米 - 带右转盘，- + 左旋转 - 旋转轴转盘无尽360 - 每转旋转时间 12.5 秒 - 向左+向右旋转 - 旋转轴旋转角度 180 - 旋转时间为180旋转角度10秒。 - 2 x 双脚按钮，用于转盘 + 旋转臂 - 海德。夹紧螺栓，用于在转盘中间夹紧工件 - 夹紧螺栓的夹紧行程/夹紧行程 32 mm - 锁模力压制/拉动 80 / 48.9 kN - 夹紧气缸内螺纹 M 27 x 40 - 西门子定位控制 - 手动操作或通过控制操作 - 空间要求约为 宽 1500 x 深 2800 x 高 1100 mm - 重量约 2500公斤 - 带高频装置的独立控制柜 - 高频工�

Auction-ID: A1-49846-20

WITHOUT SUCTION WITHOUT CONTENT Auction-ID: A1-49884-88

Technical equipment: Manufacturer Extraction arm: Plymovent Machine type: Soldering and welding booth / manual workstation Worktop: Steel worktop with perforated grid Suction: 1x Plymovent suction arm with capture hood Monitor: 1x flat screen monitor Scanner: 1x Barcode Scanner Torch: 1x Soldering/Welding Torch Media supply: 1x media plate with gas, compressed air and supply connections Air gun available Protective cladding made of aluminium profiles and transparent protective screens Industrial Aluminum Profile Frame Auction-ID: A1-49884-30

Included support arms and clamping tools. Product on table not included Auction-ID: A1-48649-4

MIG (not tested) 230V / 400V 3~ Auction-ID: A3-46152-6149

Equipped with grid holes in top and side beams, Ø 30 mm, top thickness approximately 20 mm. Auction-ID: A1-48474-209

Equipped with grid holes in top and side beams, Ø 30 mm, including various clamps, stops, pins and clamping accessories Auction-ID: A1-48474-106

Table surface: 1100 x 550 mm, with vice (jaw width: approx. 135 mm), without accessories below Auction-ID: A7-49773-161

Equipped with grid holes in top and side beams, Ø 30 mm, top thickness approximately 20 mm, including various clamps, stops, pins and clamping accessories. Auction-ID: A1-48474-100

Equipped with grid holes in top and side beams, Ø 15 mm, top thickness approximately 12 mm, including various clamps, stops, pins and clamping accessories. Auction-ID: A1-48474-258

Equipped with grid holes in top and side beams, Ø 30 mm, including various clamps, stops, pins and clamping accessories Auction-ID: A1-48474-99

Sale from caldelabra/lamp post factory liquidation. Welding table 202x300 cm Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-14

Sale from caldelabra/lamp post factory liquidation. Welding table 151x255 cm (general height 88 cm, max. height 105 cm) Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-12

Sale from caldelabra/lamp post factory liquidation. Welding table 151x255 cm. Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-13

top thickness approximately 50 mm. Including accessories, and accessories. Auction-ID: A1-48474-210

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 300 mmbore: 28 mmweight: 1670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 880 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 22 mmweight: 214 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 530 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 554 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 124 bore: 28 mmweight: 326 kg4-283500consisting of:- 14x Professional screw clamp - nitrided -- 10x Professional screw clamp 45°/90° - nitrided- 8x Prism Ø 50 135° with screwed-in collar - nitrided- 36x Quick-clamping bolts without groove, double - burnished- 8x magnetic clamping bolts 68 - aluminum- 12x universal stop 150 L - nitrided- 12x universal stop 225 L - nitrided- 4x universal stop 500 S - nitrided- 12x stop and clamping bracket 175 L - nitrided- 2x stop and clamping bracket 300 G - nitrided- 2x stop and clamping bracket 500 G - nitrided- 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided- 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracketClamping bracket 750 G right - nitrided- 1x stop and clamping bracket 800 GK left - nitrided ...

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 392 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.553 kgProduct description:Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet.Welding table:- High-quality steel S355J2+N + plasma nitriding 200- Holes surface 100x100 mm grid- Corners, edges, and holes 45° chamfered- Holes side panel in diagonal grid- Construction reinforced by ribs- Includes basic foot equipment (working height 850 mm)Accessories:- 6 x professional nitrided screw clamps- 12 x quick-release bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping angle 175 L nitrided- 2 x stop and clamping angle 500 G nitrided- 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided- Allen key size 6- Brush Ø 30 with protective cap- CleanB ...

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 408 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 22 mmweight: 740 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 1 weight: 2,57 kgwidth: 265 mmheight: 250 mmclamping force max.: 3 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mmSide panel height: 200 mmwork height max.: 850 mmweight: 850 kg Special item - fair use - high-quality steel S355J2+N + plasma nitriding- Side panel holes in diagonal grid- Corners, edges and drill holes chamfered 45°- Construction reinforced with ribs- incl. basic foot equipment (working height 850 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1075 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kgProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mmtable load: 500 kgswivelling range: 0 - 90 Gradtable load: horizontal 500 Kgtable load: vertikal 250 Kgboring diameter: 100 mmtable turning speeds: 0,2 - 1,9 U/mintotal power requirement: 0,37 kWThe D-BYT N welding manipulator has a hollow shaft, also known asSpindle bore in the rotary table, which makes inert gas welding possible. theDue to the compact design, turn-tilt tables can be installed in anyintegrate existing production facilities. Inert gas welding (forming gas).thereby simplified.Features:- Double foot pedal (start-stop/left-right) included- The new welding table D-BYT-500N includes, in addition to the standard start/Stop foot pedal also an extra remote control (on the cable).- Infinitely adjustable rotation speed of the table- Suitable for any welding process, even high frequency- Very high stability - compact model- Through hole in the turntable plate- ...

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 543 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.