Lg.Nr 26071 技术数据： - 载重能力 650 千克 - 面板尺寸：700 x 700 毫米 - 面板 mot。无限可倾斜 0 - 135 ° - MOT。旋转机芯无限调节，转速0.07 - 1.5转/分钟 - 水平位置的桌面高度：890毫米 - E. 控制键 - 空间需求约宽850 x 高890 x 宽 1200毫米 - 重量约400 公
950 € 加入备选清单
Technical equipment: Manufacturer Extraction arm: Plymovent Machine type: Soldering and welding booth / manual workstation Worktop: Steel worktop with perforated grid Suction: 1x Plymovent suction arm with capture hood Monitor: 1x flat screen monitor Scanner: 1x Barcode Scanner Torch: 1x Soldering/Welding Torch Media supply: 1x media plate with gas, compressed air and supply connections Air gun available Protective cladding made of aluminium profiles and transparent protective screens Industrial Aluminum Profile Frame Auction-ID: A1-49461-30
Lg.Nr 25075 莫特。焊接旋转和倾斜工作台 规格： - 负载能力 1000 kg - 面板直径 800 mm - 面板可通过电机倾斜 - 旋转运动电动。无级变速 0 - 250 cm/min - 焊接电流传输 650 A - 驱动 400 V / 2.8 kW - 水平位置的工作台高度约为 1100 毫米 - Re- + 逆时针旋转 - 空间要求 宽 1200 x 高 1100 x 深 1500 毫米 - 重量约 850 千克
950 € 加入备选清单
Technical equipment: Manufacturer Extraction arm: Plymovent Machine type: Soldering and welding booth / manual workstation Worktop: Steel worktop with perforated grid Suction: 1x Plymovent suction arm with capture hood Monitor: 1x flat screen monitor Scanner: 1x Barcode Scanner Torch: 1x Soldering/Welding Torch Media supply: 1x media plate with gas, compressed air and supply connections Air gun available Protective cladding made of aluminium profiles and transparent protective screens Industrial Aluminum Profile Frame Auction-ID: A1-49461-60
机器类型：焊接转盘 制造：美库尔/康泽尔曼 型号 CD 50/25 - 320 连接电压 1 x 230 V 速度范围 0.25 – 2.5 rpm，无级变速 速度控制 1 ： 10 扭矩 2.5 – 10 Nm 面板直径 250 mm 面板 - 内部通道 10 mm 面板倾斜角度 135 垂直负载能力 0.5 kN = 50 kg 工作台高度 320 mm 手动倾斜运动，可夹紧 倾翻扭矩 90 Nm 受电弓 400 A 80 % 直流 连接方式 - 脚踏开关简单 - 双脚踏开关 - 脚遥控 年龄 3 岁 条件：和新的一样好 重量 44 kg 保修期为自交货之日起24个月 原价 €2，198.00 + 增值税 报价 €1，690.00 + 增值税 脚踏开关简单，带 3 米电缆 239.00 € + 增值税 019.0.2900 带 3 米电缆的双脚踏开关 389.00 € + 增值税 019.0.2901 带 5 米电缆的脚踏遥控器 529.00 € + 增值税 N019 ...
焊接排烟台 焊接台DCE UMA150HG5除尘 带集成吸入器的焊接工作台，带过滤器 制造商粉尘控制设备除尘器 型号 UMA 150H G5 根据照片休息
规格： - 负载能力定位表约 750公斤 - 面盘直径 500 mm - 工件直径 1600 mm - 高度转盘，水平位置约为 750 毫米 - 带右转盘，- + 左旋转 - 旋转轴转盘无尽360 - 每转旋转时间 12.5 秒 - 向左+向右旋转 - 旋转轴旋转角度 180 - 旋转时间为180旋转角度10秒。 - 2 x 双脚按钮，用于转盘 + 旋转臂 - 海德。夹紧螺栓，用于在转盘中间夹紧工件 - 夹紧螺栓的夹紧行程/夹紧行程 32 mm - 锁模力压制/拉动 80 / 48.9 kN - 夹紧气缸内螺纹 M 27 x 40 - 西门子定位控制 - 手动操作或通过控制操作 - 空间要求约为 宽 1500 x 深 2800 x 高 1100 mm - 重量约 2500公斤 - 带高频装置的独立控制柜 - 高频工
table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 300 mmbore: 28 mmweight: 1670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 880 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 22 mmweight: 214 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 530 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 554 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 124 bore: 28 mmweight: 326 kg4-283500consisting of:- 14x Professional screw clamp - nitrided -- 10x Professional screw clamp 45°/90° - nitrided- 8x Prism Ø 50 135° with screwed-in collar - nitrided- 36x Quick-clamping bolts without groove, double - burnished- 8x magnetic clamping bolts 68 - aluminum- 12x universal stop 150 L - nitrided- 12x universal stop 225 L - nitrided- 4x universal stop 500 S - nitrided- 12x stop and clamping bracket 175 L - nitrided- 2x stop and clamping bracket 300 G - nitrided- 2x stop and clamping bracket 500 G - nitrided- 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided- 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracketClamping bracket 750 G right - nitrided- 1x stop and clamping bracket 800 GK left - nitrided ...
table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 392 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.553 kgProduct description:Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet.Welding table:- High-quality steel S355J2+N + plasma nitriding 200- Holes surface 100x100 mm grid- Corners, edges, and holes 45° chamfered- Holes side panel in diagonal grid- Construction reinforced by ribs- Includes basic foot equipment (working height 850 mm)Accessories:- 6 x professional nitrided screw clamps- 12 x quick-release bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping angle 175 L nitrided- 2 x stop and clamping angle 500 G nitrided- 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided- Allen key size 6- Brush Ø 30 with protective cap- CleanB ...
table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 408 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 22 mmweight: 740 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 1 weight: 2,57 kgwidth: 265 mmheight: 250 mmclamping force max.: 3 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mmSide panel height: 200 mmwork height max.: 850 mmweight: 850 kg Special item - fair use - high-quality steel S355J2+N + plasma nitriding- Side panel holes in diagonal grid- Corners, edges and drill holes chamfered 45°- Construction reinforced with ribs- incl. basic foot equipment (working height 850 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1075 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kgProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 690 mmtable load: 500 kgswivelling range: 0 - 90 Gradtable load: horizontal 500 Kgtable load: vertikal 250 Kgboring diameter: 100 mmtable turning speeds: 0,2 - 1,9 U/mintotal power requirement: 0,37 kWThe D-BYT N welding manipulator has a hollow shaft, also known asSpindle bore in the rotary table, which makes inert gas welding possible. theDue to the compact design, turn-tilt tables can be installed in anyintegrate existing production facilities. Inert gas welding (forming gas).thereby simplified.Features:- Double foot pedal (start-stop/left-right) included- The new welding table D-BYT-500N includes, in addition to the standard start/Stop foot pedal also an extra remote control (on the cable).- Infinitely adjustable rotation speed of the table- Suitable for any welding process, even high frequency- Very high stability - compact model- Through hole in the turntable plate- ...
table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 543 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 32 bore: 28 mmweight: 51,2 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 913 kg280030.XD7D- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 – 27 mm- Sidewall made of high quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Holes surface in diagonal grid- Rounded corners, edges and holes- Side panel height 200 mm- Holes in the side wall in the diagonal grid- Including scaling on the surface- Structure reinforced with ribs- Grid lines enable precise build-upsIncluding 4x feet basic equipment 650 item no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mmtable width: 1200 mmtable height: 150 mmbore: 22 mmweight: 395 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 420 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1100 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
