压力机 二手 出售 (1,659)

倒角长度：650毫米 板厚：-1.6毫米 机器重量约150公斤 机器尺寸约2000 x 1000 x 900毫米本广告数据由ModulMWS——LogoTech oHG的软件解决方案创建�

压力：30 最大直径：250毫米 表尺寸：650 x 500 毫米 行程：400毫米 日轻度：最小120 / 最大500毫米 控制：Simatic HMI Touch 西门子总功率需求：13千瓦 机器重量约3.5 倍 机器尺寸约2.5 x 1.70 x 2.85米 设置模式和单行程作模式 两张侧桌，支撑面积为850x500毫米，配备液压球杆用于 重型工件 本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

pressure: 185 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 175 mm/sbending speed: 0-12 mm/stotal power requirement: 22 kWweight of the machine ca.: 15.500 kgdimensions: 4970 x 3260 x 2090 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 18 kWweight of the machine ca.: 13.000 kgdimensions: 5080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力：630 t直径：320 mm行程：310 mm总功率要求：kW机器重量约：3500 t机器尺寸约：m此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案�

压力：12 t柱间距：/ mmdayligth：/ mm总功率要求：kW机器重量 ca.：机器尺寸 ca.：m此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案�

pressure: 100 tchamfer lenght: 3000 mmdistance between columns: 2550 mmstroke: 150 mmtotal power requirement: . kVANumber of working hours: . hworkpiece: workpiece: Number of strokes: total power requirement: kWweight of the machine ca.: 8,3 tdimensions of the machine ca.: mBack gauge 400mmThroat 250mmSpeed: 8mm /SkW: 6,5Volts: 380 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch Tea ...

pressure: 60 tstroke: 400 mmdaylight longitudinal/sideways: 820 x 300 mmdayligth: 900 mmliter capacity: 6,5 lfeed down: 6,1 mm/secfeed up: 10 mm/secMotor output: 2,2 kWweight of the machine ca.: 0,675 tdimensions of the machine ca.: 1,46 x 0,85 x 2,1 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tstroke: 400 mmdaylight longitudinal/sideways: 1010 x 300 mmMotor output: 4,0 kWliter capacity: 11,0 ldayligth: 900 mmtable surface area: 1010 x 560 mmfeed down: 4,8 mm/secfeed up: 7,5 mm/secweight of the machine ca.: 0,9 tdimensions: 1550 x 900 x 2450 mmHigh-quality hydraulic press can be operated manually or by motor.Cylinders can be moved sideways.Safety valve at cylinder end position.CE markedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tchamfer lenght: 4050 mmdistance between columns: 3550 mmControl: CYBELEC ModEva Pac throat: 350 mmdistance between table / ram: 430 mmtable width: 250 mmstroke: 250 mmtotal power requirement: 18,5 kWweight of the machine ca.: 16500 kgdimensions of the machine ca.: 4400x2100x3200 mmEquipment/accessories:- Control conversion at the end of 2018- Electric backgauge 1250 mm- 10-stage die displacement- crowning- EHT 26 mm tool holder- Axes controlled: Y1,Y2,X,R- Sheet metal holding table- 4x manually adjustable stop fingers- pneum. Upper tool clamping- Safety light curtain- 3x height-adjustable support arms- Oil cooler- 2-hand foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 tstroke: 8-80 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 70 mmtable surface area: 900x600 mmram surface: 900x470 mmhole in the table: 450x180 mmdist. between columns - front to rear: 500x350 mmdist. between pillars (front to rear): 788 mmtotal power requirement: 10 kWweight of the machine ca.: 10 tdimensions of the machine ca.: BxTxH 1600x1200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tthroat: 310 mmstroke: 30-120 mmno. of strokes: 20-60 Hub/minram - range of adjustment: 90 mmtable surface area: 820x600 mmram surface: 550x430 mmhole in the table: 330x200 mmtable height: 750 mmtool hole in ram: Ø50 mmweight of the machine ca.: 9,5 tdimensions of the machine ca.: BxTxH 2500x2500x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 tthroat: 240 mmstroke: 12-84 mmno. of strokes: 135 Hub/minram - range of adjustment: 70 mmtable surface area: 600x450 mmram surface: 360x180 mmhole in the table: 220x130 mmtable height: 630 mmtool hole in ram: Ø35 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: BxTxH 1500x2000x2600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 375 mmstroke: 20-125 mmno. of strokes: 60 Hub/minram - range of adjustment: 80 mmtable surface area: 920x660 mmram surface: 700x450 mmhole in the table: Ø90 mmtool hole in ram: Ø50 mmweight of the machine ca.: 8 tdimensions of the machine ca.: 2100x1500x3300 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 260 mmstroke: 8-100 mmram - range of adjustment: 63 mmno. of strokes: 115 Hub/min: 316 mmtable surface area: 630x490 mmram surface: 315x260 mmhole in the table: Ø 140 mmtotal power requirement: 4 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力：50 tc倒角长度：2500 mm柱间距离：2050 mm工作台宽度：140 mm工作台高度：750 mm总功率要求：8 kW机器重量约：4.5 t机器尺寸约：3， x 1.2 x 2.6 m设备：• 手动逆止器• 上下工具• 2 个手动作/脚踏开关此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案�

pressure: 20.0 tchamfer lenght: 850 mmdistance between columns: 850 mmback stop - adjustable: 375 + 400 mmstroke of upper beam: 196 mmdayligth: 470 mmajustment speed: 200 mm/sectable height: ca. 900 mmtotal power requirement: 5.0 kWweight of the machine ca.: 2500 kg New price ~ 85.000 euros well-kept / very good condition () with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil- in checked condition - machine video -https://www.youtube.com/watch?v=foxzKIA7vX8Description :High performance, fast travel speeds and the best ergonomicsthis bending machine to a perfect tool in terms of productivity andAccuracy.This allows an unrivaled high productivity in the field of small andmiddle bending parts can be achieved, since even complicated bending sequencesseveral stations can be processed very quickly.A large number of different and universally ...

pressure: 80.0 tchamfer lenght: 2550 mmdistance between columns: 2130 mmcolumn arm: 420 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 80.0 mm/secstroke: 200 mmdayligth: 470 mmtable width: 60.0 mmtable height: 910 mmNumber of working hours: ca. 37.102 htotal power requirement: 9.0 KWweight of the machine ca.: 5750 kgrange L-W-H: 3100 x 2180 x 2540 mm good / well-maintained condition ()- Inspected condition - Machine video -https://www.youtube.com/watch?v=fwdjSiQYq_AEquipment:- CNC electro-hydraulic press brake- OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2- CNC-controlled backgauge adjustment (X-axes)- CNC-controlled vertical adjustment of the stop fingers (R-axes)- CNC-controlled left-right adjustment of the stop fingers (Z-axes)- Freely movable two-hand control & foot switch- Tool crowning - AMADA type- Various tools- CE marking- Side guards ( ...

pressure: 50 tchamfer lenght: 2500 mmdistance between columns: 2050 mmthroat: 200 mmtable width: 140 mmtable height: 750 mmdistance table - lower edge of ram: 300 mmmax. ram stroke: 100 mmclosing speed: 9 - 160 mm/secreturn speed: 55 mm/secvoltage: 380 V / 50 Hzengine output: 4,1 kWtotal power requirement: 5 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 3, x 1,2 x 2,6 mEquipment:• manuel back stop• upper and lower tools Split , lower tool 2000 mm long• 2 manual operation / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tno. of strokes: 1500 Hub/minsheet width: mmtotal power requirement: 20 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tno. of strokes: 1500 Hub/minsheet width: mmtotal power requirement: 20 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力机容量：63 吨 滑枕行程可调：8 - 60 毫米 滑块调整：80 毫米 关闭高度（行程向下，向上调整）：300 毫米 工作台表面积：810 x 550 毫米 滑动面积：700 x 420 毫米 工作台孔：550 x 140 毫米 油盘之间的距离：700 毫米 工作台离地面高度：920 毫米 行程数： 65 - 400 秒机器重量约：8 吨 尺寸长 x 宽 x 高：2935 x 1170 x 3000 毫米 主电机：11 kW

容量：35吨 喉部深度：225毫米 柱塞行程：8 - 80毫米 滑块调节：50毫米 关闭高度（行程向下，向上调整）：325毫米 工作台表面积：600 x 450毫米 滑动面积：300 x 225毫米 行程数：160 s.p.m.所需功率：2.2 kW 尺寸长 x 宽 x 高：1000 x 1600 x 2200 毫米 机器重量约：1.9 �

总压力：400 吨 滑枕行程：500 毫米 滑块调节：350 毫米 日光：1250 毫米 工作台表面积：2500 x 1500 毫米 滑块面积：2500 x 1500 毫米 行程数：15 - 30 s.p.m.最大滑枕模具重量：4000 kg 所需功率：70 kW 地板高度约：8000 mm 机器重量约：150 �

总压力：400 吨 滑枕行程：500 毫米 滑块调节：350 毫米 日光：1250 毫米 工作台面积：2500 x 1500 毫米 滑块面积：2500 x 1500 毫米 工作台上的模垫容量：80 吨 模垫行程：250 毫米 行程数：15 - 30 s.p.m.最大滑枕模具重量：4000 kg 所需功率：70 kW 地板高度约：8000 mm 机器重量约：150 �

总压力：315 吨 行程：1100 毫米 日光：2200 毫米 台面面积：2500 x 1000 毫米 滑动面积：2500 x 1000 毫米 最大滑枕模具重量：6000 公斤 接近速度：600 毫米/秒 工作速度：32 - 230 毫米/秒 返回速度：600 毫米/秒 所需功率：158 kW 机器重量：44 吨 地板高度： 6175 毫�