压力机 二手 出售 (1,657)

Auction-ID: A1-47531-86

: neu : ca. 4 Monate ab Auftragse : Italien : 35400 €: 676.14 €: 40 to: 500 mm: 700x350 mm: 700x500 mm: 500 mm: 250 mm: 26 mm/s: 9 mm/s: 4 kW: 1500 mm: 1000 mm: 2500 mm: 1500 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,-Siemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € 9.000,- Stroke counter € 400,- Decompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € 900,-The data for this ad was cr ...

throat: ca. 300 mmstroke: ca. 200 mmpressure capacity max.: 35 tdie cushion hydr. pressure/stroke: 15 ttotal power requirement: 5,6 kWweight of the machine ca.: ca 2,5 tdimensions of the machine ca.: 1 x 0,9 x H 2,4 m mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 8300 €: 160.19 €: 1 : 100 to: horizontal verschiebbar : 300 mm: 1070 mm: 5 mm/s: 10 mm/s: 2110 mm: 1000 mm: 2430 mm: 1500 kgdemo machine / mint conditionnet price (price for new machine € 9.000,00)horizontally displaceable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcontrol: CYBELEC DNC 86 PS total power requirement: 18,5 kWweight of the machine ca.: 18.000 kgdimensions of the machine ca.: 5180x2400x3200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力：100 倒角 长度：3050 毫米 柱间距：2550 毫米 机器重量约 9,000 公斤 机器尺寸 约 4000x2100x2700 毫米 本广告数据由 ModulMWS 创建——LogoTech oHG 的软件解决方案�

Max. baling capacity: 20 t, max. piston stroke: 185 mm, working area: 61 x 1021 mm, bed length: 548 mm, compressed air connection: 1/4 inch Auction-ID: A7-47533-163

Stroke: 80 mm, table dimensions: 180 x 110 mm Auction-ID: A7-47533-312

Operating hours: approx. 19987 hrs., briquetting diameter: approx. 60 mm, briquette length: approx. 70 - 90 mm Auction-ID: A7-47533-45

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 15 stroke: 250 mmdayligth: 470 mm: 180 mm/sbending speed: 0-10 mm/s: 165 mm/stotal power requirement: 15 kWweight of the machine ca.: 12.500 kgdimensions: 4000 x 2000 x 3030 mmStandard equipment:- Cybelec CybTouch 15 Windows CNC control- 4 + 1 axes: Y1, Y2, X, R, C- Mechanical crowning system: B-CM- Backgauge system, model GHP-2- Servo-driven main motor- Safety system: DSP AP+MCSOptional equipment:- 2 x front support tables- 2 x stop fingers- Wila Style hydraulic upper die clamping- Wila Style hydraulic die clamping- CE Standard complianceYouTube video links:https://www.youtube.com/watch?v=u3sBJxJ3M8ghttps://www.youtube.c om/watch?v=MmZtAJArHA0https://www.youtube.com/watch?v=mybVan1S2pkThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tchamfer lenght: 2550 mmControl: Cybelec DNC 70 weight: 9000 kgdimensions: 3000 x 2100 x 3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 231900 €: 400 to: 6050 mm: Y1 / Y2 / X und R Achse : 365 mm: 5100 mm: 510 mm: 630 mm: hydraulisch : 150 mm/s: 9 mm/s: 150 mm/s: 750 mm: 160 l: 7500 mm: 2110 mm: 3810 mm: 34600 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES, STEP, DXF files importservo motorized b ...

压力：25 TN。笔画数：- 轮毂/薄纸宽度：- 毫米 控制：总功率需求：机器千瓦重量 约：机器尺寸约：米本广告数据使用 ModulMWS - LogoTech oHG 的软件解决方案创建�

pressure: 60.0 tchamfer lenght: 2600 mmdistance between columns: 2100 mmcolumn arm: 200 mmstroke of upper beam: 100 mmdayligth: 280 mmtable height: 840 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/secback stop - adjustable: max. 650 mmControl: ATS 560 oil volume: ca. 150 lvoltage: 380 Vtotal power requirement: 7.5 kWweight of the machine ca.: 4700 kgEquipment:- electro-hydraulic NC press brake - easy to operate- HACO NC control model ATS 560 7-digit LED display Memory capacity for 200 programs with a maximum of 400 sets Working with pressure and immersion depth Inching function for electric backgauge Set / actual value input for back gauge Swiveling control panel, left front- NC controlled axes : Y1 Y2 X axis- NC electro-hydraulic synchronization and immersion depth positioning- NC electro-motorized backgauge with ball screws speed 240 mm/sec. including 2x manually adjustable stop fi ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 187100 €: 3536.19 €: 400 to: 4050 mm: Y1 / Y2 / X und R Achse : 365 mm: 3400 mm: 410 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 160 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 154 mm: 2 x 11 kW: 5750 mm: 2110 mm: 3450 mm: 27780 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Wi ...

压力：320 倒角 长度：6100毫米 控制：MNC95 工作时间：4312 小时 电压：380 V / 50 Hz 总功率需求：25千瓦 机器重量约26吨 本广告数据由ModulMWS——LogoTech oHG的软件解决方案创建�

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 292300 €: 600 to: 6050 mm: Y1 / Y2 / X und R Achse : 365 mm: 5100 mm: 510 mm: 700 mm: hydraulisch : 80 mm/s: 6,5 mm/s: 80 mm/s: 750 mm: 280 l: 2 x 11 kW kW: 7600 mm: 2650 mm: 3950 mm: 52500 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES, STEP, DXF files importser ...

压力：25 主轴直径：70 毫米 行程：210 毫米 - 表尺寸：350 x 500 毫米 总功率需求：千瓦 机器重量约：0.9 吨 本广告数据使用 ModulMWS 创建 - LogoTech oHG 的软件解决方案�

压力：250 最大轴：360毫米 表尺寸：1.250 x 630毫米 表径：250毫米 RAM 尺寸：850 x 450 毫米 日轴：800毫米 活塞行程：bis 500 毫米 活塞直径：400/360 mmram 冲程速度：Abwärts 200 mm/secram 行程速度：aufwärts 110 mm/秒 总功率需求：20.5千瓦 机器重量约8吨 本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

压力：250 最大轴：360毫米 表尺寸：1.250 x 630毫米 表径：250毫米 RAM 尺寸：850 x 450 毫米 日轴：800毫米 活塞行程：bis 500 毫米 活塞直径：400/360 mmram 冲程速度：Abwärts 200 mm/secram 行程速度：aufwärts 110 mm/秒 总功率需求：20.5千瓦 机器重量约8吨 本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

pressure: 3,3 bei 6bar tdayligth: 250 mmstroke: 70 mmwork stroke: 10 mmtable surface area: 220x190 mmthroat: 150 mmweight of the machine ca.: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力：30 行程：300毫米 柱间日光：700毫米 日光：850毫米：140毫米 活塞直径：60毫米 可用表面积：700 x 390毫米 机器重量约：0.35 机体尺寸：1.2 x 0.8 x 2.2 米车间压机 - 可动气缸 - 2个支撑棱柱 - 紧急停止装置 本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

pressure: 20 ttotal power requirement: 20 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力：25 最大直径：250 毫米 行程：400 毫米 表面积：600x480 mmram 表面积：135 毫米 台高：980 毫米 机器重量约1.5 机体尺寸 约：2000x2000x2700 毫米本广告数据由 ModulMWS - LogoTech oHG 的软件解决方案创建�

压力：160 倒角 长度：3200 毫米 控制：CYBELEC CybTouch 15 PS 机器重量约：14,000 公斤 机器尺寸 约：米 本广告数据由 ModulMWS 创建——LogoTech oHG 的软件解决方案�

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATS 585 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmFurnishing:- NC controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control ATS 560 Positioning of the backgauge (X axis) Depth setting positioning (Y1+Y2 axis) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, left front- electric back gauge (X axis) with 2 stop fingers, manually adjustable (R+Z axis)- System A tool holder - with cambered upper wedge- Split insert/bending tools- side protection grids- rear protection- free-moving double foot switch- Operation manualThe d ...

pressure: 40 tthroat: 230 mmstroke: 4-100 mmtable surface area: 650x450 mmram surface: 420x220 mmram - range of adjustment: 85 mmhole in the table: 170x220 mmtable height: 800 mmno. of strokes: 60 Hub/mindayligth: 375 mmDimensions (HxWxD): 2800x1200x1900 mmweight of the machine ca.: 3,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: 300 mmstroke: 8-110 mmno. of strokes: 100 Hub/minram - range of adjustment: 75 mmtable surface area: 750x590 mmram surface: 540x400 mmhole in the table: 200x200 mmtable height: 780 mmtool hole in ram: Ø 40 mmtotal power requirement: 11 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 1200x1700x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

冲动容量：45吨 滑动行程可调节：10 - 40毫米 滑套调节：50毫米 关闭高度（行程下降，调节向上）：220 - 300毫米 自由前开左比：560毫米 工作台表面积：550 x 450毫米 滑套面积：550 x 360毫米 桌孔：450 x 100毫米 行程次数：100 - 500 每分钟所需功率：7.5千瓦 机器重量约6.2�

压力总量：140吨 行程：800毫米 日照时间：1.004毫米 自由正面开口 左-右：2.060毫米 工作台表面积：2,000 x 520毫米 滑动面积：2.040 x 520毫米 工作速度：4-20毫米/秒 快速行程：135毫米/秒 返回速度：120毫米/秒 机器重量约14吨 距地面高度约4.810毫米 油量： 700�