liebherr 기어 절단 및 호빙 기계 사용 판매를 위해

7 stueck LORENZ or LIEBHERR Schraegfuehrungen - see picture Further: Airfilter (Euro 1000,--)

Hobbing machine Manufacturer: Liebherr Type S600

max. wheel diameter:280 mm max. module:5 min. module:1 min. number of teeth:7 toolpiece turning speed range:4.000...10.000 U/min tool length:210 mm CBN

max. wheel diameter:180 mm max. module:7 hob turning speeds:200-2000 U/min min. number of teeth:4 excluding conveyor belt

max. wheel diameter: 180 mm table diameter: 145 mm max. module: 3-5 mm gear width: 250 mm table turning speeds: 800 U/min milling head vertical adjustable: 400 mm Milling axis swiveling range: + / - 45 ° max. milling cutter diameter: 90 mm hob turning speeds: 0 - 6000 U/min cutter length max.: 211 mm control: Siemens 840 D total power requirement: 23 kW weight of the machine ca.: ca. 10 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Machine in top condition, equipped with loading unit, many accessories. This machine is equipped with manual deburring function with a cutting wheel, no chamfering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Under power , complete

max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 weight of the machine ca.: 10.000 kg dimensions of the machine ca.: 6500x 2700x 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 80 mm gear width: 120 mm max. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kW weight of the machine ca.: 7500 t dimensions of the machine ca.: m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 ______________________________________________________ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rate ...

max. wheel diameter: 280 mm gear width: 330 mm max. module: 5 min. module: 1 Control: LIEBHERR CNC total power requirement: 28 kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 265 mm gear width: 45 mm max. module: 4 min. module: 0,3 max. workpiece diameter: 300 mm stroke length max.: 0-50 mm stroke position adjustment: 25 mm distance work spindle /surface of the table: 170/245 mm spindle taper: innen MK 4 table-size: 180 mm table hole: 95/75 mm strokes per minute: 450 - 840 total power requirement: 10 kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m : : : : : : : Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 m ...

Gear hobbing machine LIEBHERR ET 1200

max. wheel diameter: 780 mm gear width: 130 mm max. module: 8 / 10 table diameter: 510 mm table bore diameter: 160 mm number of strokes (double strokes): 30 - 1500 DH/min Control: Siemens Sinumerik 3 distance table - lower edge of ram: 650 mm table-size: 500 mm total power requirement: 36 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,9 x 3,65 x 3,8 m The machine is suitable for: - Internal and external gear teeth in small quantities - Internal gear teeth in blind holes (non-through holes) - External gear teeth without run-out, as hobbing would not be possible Examples of components are: Internal gear rings for planetary gears, drive shafts, clutch hubs... - Siemens Sinumerik 3 CNC control - Chip conveyor Machine was only used sporadically The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 kg dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 380 mm gear width: 200 mm max. module: 6 min. module: Control: SIEMENS Sinumerik 840D working area: - max. gear diameter: 380 mm max. workpiece diameter: 400/ 600 (800) Außen innen beg max. gear width: 200 mm Center distance between gear head and table center: -50 / 450 mm Travel range of the lifting position: 250 mm Max. module for straight gearing: 6 mm Max. axial travel: 250 mm work table:: - table diameter: 400 mm table hole: 150 mm max. table speed: 30 1/m no. of T-slots: 6 St. Table equipped with hydraulic clamping device: - Multi-interface for pallet loading and zero-point: - clamping system in the working area: Shaping Head and Lift-off Cam:: - Drive power of face milling head: 37 kW Max. stroke rate: 600 DH/min Face milling head axis angle adjustment: +/- 0,5 ° spindle cone: HSK-B100 DIN 69893 taper of shaper cutter: 60 work-spindle diameter: 110 mm Stro ...

gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm control: Liebherr PC-NC max. workpiece diameter: 1500 mm table diameter: 900 mm table bore diameter: 320 mm max. table load: 95 kN power capacity: 30 kW coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm Shaping spindle diameter: 125 mm tool taper: SK 45 DIN weight of the machine ca.: 26 t dimensions of the machine ca.: 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2500 mm gear width: 750 mm max. module: 18 / 22 min. module: table diameter: 1800 mm min. number of teeth: 12 table hole: 300 mm hob turning speeds: 20 - 100 U/min table load: 10 t milling cutter dia. x width: 250 x 340 mm shifting: 150 mm feeds - tangential: 0,25 - 3 mm/min feeds - radial: 0,07 - 1,5 mm/min feeds - longitudinal: 0,55 - 3,5 mm/min milling feeds: 13,4 - 80 (Einzelteilen) mm/min total power requirement: ca. 30 kW weight of the machine ca.: 28 t - change gears, arbors, toolings, clamping plots - universal hob head - swiveling outer steady - single indexing device party overhauled in 2023 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 3000 mm gear width: 500 mm max. module: 25 / 40 spindle turning speed range: 250 U/min feed speeds: max. 4000 mm/min faceplate diameter: 2000 mm table bore diameter: 700 mm table turning speeds: 51 U/min power capacity - milling spindle: 53 kW drive motor for milling spindle: - kW axial adjustment: 1200 mm milling head swivable ca.: +/- 45 ° control: Siemens 840D total power requirement: - kW weight of the machine ca.: 55 t - CNC Control Siemens 840D - Internal Hob Head IFK - External Hob Head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Liebherr / Lorenz S800 Gear - Hobbing Machine -Max. workpiece length with counter holder 600mm -Max. workpiece length with retracted counter holder 800mm -Max. travel of the milling carriage 360mm -Largest millable pitch for the largest workpiece 5 Pi / in the normal power range 8 Pi -Pick-up taper - milling spindle MK 5 -Mandrel 22/27/32/40mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter displacement 80mm -Milling cutter speeds 40-220 rpm -Feeds infinitely variable / horizontal -Feeds infinitely variable / vertical -Feeds infinitely variable / tangential -Clamping table without water rim 550mm -Clamping table hole 100mm -Mandrel taper MK5 Accessories: 1x pallet interchangeable wheels 1x pallet hob 1x pallet clamping mandrels Documentation Machine feet Dimensions: LxWxH 3.6x1.8x1.9 meters / weight 5000Kg

max. wheel diameter: 180 mm gear width: ca. 220 mm max. module: 3 / 5 mm Control: Siemens 840D sl max. radial velocity: 5000 mm/min max. workpiece diameter: 180 mm table rotation speed: 800 U/min table diameter: 145 mm axial travel: 250 mm mm back rest:: axial travel: 300 mm clamping force max.: 13 kN milling head:: swivelable +/-: 45 ° drive capacity: 23 kW turning speeds: 6000 U/min diameter of tools max.: 90 mm tool clamping length max.: 211 mm module hobbing max.: 3 module profile milling max.: 5 tangential speed max.: 7500 mm/min weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 500 mm gear width: 400 mm max. module: 10 mm Control: SIEMENS Sinumerik 840D sl max. workpiece diameter: 500 mm Max. Distance from table to counterholder: 1.120 mm Max. Distance table to center of milling spindle: 585 mm Min./max. center distance between milling spindle: 50/475 mm table diameter: 420 mm table hole - depth: 150 mm Table equipped with hydraulic clamping device: : milling spindle: : milling spindle speeds: 48- 480 1/min stufenlos milling head swivelling angle: +/- 50 A-Achse Grad tool taper: SK 40 Tangential path of the milling carriage: 200 mm milling cutter diameter: 170 mm Max milling width: 250 mm electrical supply data: : voltage: 400 V operating frequency: 50 Hz connecting power: 55 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 6,2 x 4,2 x 3,e m Equipment and Accessories • High-performance CNC gear hobbing machine LIEBHER ...

Gear shpping machine LIEBHERR LS 200F.

Gear shapping machine LIEBHERR LFS 200

Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5- K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm -Accessories: including extensive accessories see photos -Machine dimensions: 2300/1460/H1870 mm -Dimensions accessories: pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm max. workpiece diameter: 1500 mm Control: Siemens 840 D table diameter: 900 mm Table hole Diameter / depth: 320 / 520 mm max. table load: 95 kN coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm work-spindle diameter: 125 mm tool taper: SK 45 DIN Table rpm: 12 1/min power requirement: 30 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 11,715 x 5,565 x 4,505 m Strokes: - Stroke length min./max.: 0 mm / 270 mm - Stroke length adjustment range: 270 mm - Stroke rate (double strokes): 10 to 270 strokes/min Sliding head carriage: - Max. travel speed: 5000 mm/min Machine bed: - Axial travel: 600 mm Slotting head: - Max. module for rolling slotting: 16 mm - Slotting spindle diameter: 125 mm - Max. tool diameter: 30 ...

Liebherr WSC 1200____________Description:In General:Year of manufacture:2009Control system:Siemens 840 DExternal gear diameter:1,200 mmInternal gear diameter:1,200 mmMaximum gear width:260 mmMaximum workpiece diameter:1,500 mmMachine base:Travel:600 mmLateral adjustment:+/- 60 mmCutting head:Spindle diameter:125 mmTool holder:SK 45Distance between spindle and table:0–820 mmStroke length:270 mmMax. module:16 mmMax. tool diameter:300 mmMax. spindle speed:25 rpmTable:Table diameter:900 mmTable bore:320 mmBore depth:520 mmMax. speed:12 rpmMax. table load:95 kNEquipment:Chip removal:2 magnetic belt conveyorsCoolant supply:Cutting oil system with filter and temperature controlSet-up operation:Electronic handwheel

max. wheel diameter: 36 mm gear width: 36 mm max. module: 10 min. module: total power requirement: 12 kW weight of the machine ca.: 11,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024

module: 10 diameter: 180 mm Bore diameter: 40 mm width: 75 mm : 2 weight: 14 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024

max. wheel diameter:900 mm max. module:10 weight of the machine ca.:8200 kos. hob dia. - max.:190 mm cutter length max.:320 mm milling spindle speeds (infinitely variable):13-80 U/min workpiece length - max.:750 mm max. workpiece diameter:150 mm Counter holder milling mandrel is missing

module: 4 diameter: 180 mm Bore diameter: 40 mm width: 67 mm : 5 weight: 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter:780 mm gear width:130 mm max. module:10 weight of the machine ca.:8,5 t no. of strokes:30 Hub/min Hier fully functional machine, Little used There are some Tools and Change gears Liebherr WSC501 CNC gear shaping machine, used, ready for use Manufacturer: Liebherr Type: WSC 501 Mach.- No.: 4407/05 Year of manufacture: 1985 Details: Max. gear shaping module: 8mm (30°gears possible up to module 10°) Max. gear width: 130mm Diameter of the machine table: 500mm Maximum wheel diameter: 780mm Shut height ? table: 650mm Stroke rate min. 30DH/min Continuously adjustable max. 1500 DH/min. Operating voltage: 380V Frequency: 50Hz Control voltage: 110V Connected load: 36 kVA Rated current: 55A Weight: 8500kg Dimensions: approx. 4,85 x 3,655 x 3,78 (width x depth x height in m) The machine has seen only very limited use in our company. It remains fully operational and can be dem ...

max. wheel diameter:300 mm max. module:7 weight of the machine ca.:15 t table turning speeds:100 U/min table diameter:180 mm hob turning speeds:750 U/min max. hob diameter:300 cutter length max.:230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion

max. wheel diameter:180 mm max. module:5 min. module:1 weight of the machine ca.:14 t dimensions of the machine ca.:4,5 x 2,84 x 2,8 m min. number of teeth:7 toolpiece turning speed range:4000-10000 U/min tool length:210 mm With tail stock No dressing device Only CBN

(side-front moving table) Nominal force: 1000 ton Slide stroke: 400 mm Continuous slide strokes per 1 min: 20 Single slide strokes per 1 min: 16 Shut height: 1060 mm Slide adjustment: 320 mm Table dimensions: 3150x1800 mm Slide dim., front-back: 1700 mm Window H 1500 x W 1900 mm Hydro pneumatic cushion in table clamping force at P = 0.42 MPa (P = 4.2 kg / cm2), kN 2000 ejection force P = 0.45 MPa (P = 4.5 kg / cm2), kN 200 Main-drive electric motor power: 132 kW DIMENSIONS: 5150x4700x11400 H floor7830 mm WEIGHT:193 ton

; in order

Table 1750 x 920 mm, fixed stroke 101 mm, see pictures and description,; All right

The nominal gain kN 4000 Slide stroke, mm 400 Frequency Slider strokes min-1, 25 The frequency of single strokes, min-1 19 Slider travel to its lowest position, where the press develops the rated force, mm 8 The distance between table and slider in its lower position at the upper adjustment position, mm 470 Size of adjustment of distance between table and slider, mm 160 The size of the table, mm 1000x1000 The size of the slide from front to back, mm 800 Width of windows in racks mm 600 Main electric motor power, kW 37.0 Air flow, m3 / stroke 0,017 Press overall dimensions, mm left to right 3470 front to back 3140 Height above floor level, mm 5940 Weight without hydro pillow kg 32600

Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6

Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm - length 3470 - width 3140 - height 5940 Press weight without hydropneumatic pillow kg 31 400

Nominal effort: 630 tons Course stroke: 420 mm Number of strokes in a minute: 20 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Slider dimensions 1000x1000 mm Table size: 1250x1250 mm Dimensions of the hole in the table 800x800mm Thickness of the sub-stamp plate 180 mm Height above floor level 600 mm Main motor power: 56 kW hydropneumatic pillow in the table Press overall dimensions: -Length: 3280 mm -Width: 3470 mm -Height: 6190 mm Press weight: 52650 kg

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm ·from front to rear 1000 ·from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm ·length 3470 ·width 3140 ·height 5940 Press weight without hydropneumatic pillow kg 31 400

Nominal effort: 630 tons Course stroke: 420 mm Number of strokes in a minute: 20 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Slider dimensions 1000x1000 mm Table size: 1250x1250 mm Dimensions of the hole in the table 800x800mm Thickness of the sub-stamp plate 180 mm Height above floor level 600 mm Main motor power: 56 kW hydropneumatic pillow in the table Press overall dimensions: -Length: 3280 mm -Width: 3470 mm -Height: 6190 mm Press weight: 52650 kg

ARISA S-2-400-260-FD mechanical press was built in 2000 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables precise punching and stamping of metal parts. All these machining processes are performed with a high press force of up to 400 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The ARISA S-2-400-260-FD features a robust, stress-relieved gantry design with an open side wall. This design maintains high rigidity, stable parameters and repeatability during even the most intensive operations with high press force. It is distinguished by the use of two connecting rods, a flywheel drive and an eccentric pinion gear. This solution ensures even torque transmission and smooth and pr ...

ARISA S-2-630-240-120-LD mechanical press was built in 2005 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, such as precise punching and stamping of metal parts. In addition to its standard purpose, depending on the tooling and material feed systems used, the machine can also be used as a transfer press or progressive press. All machining processes are performed with a high press force of 630 tonnes. The drive system, in the form of a flywheel and an eccentric gear, cooperating with two connecting rods, ensures even torque transmission and smooth control of the slider movement. The slider, on the other hand, is guided at eight points using roller guides, which increas ...

Groove width: 3-100 mm Drawing length: 850 mm Stroke: 870 mm Table size: 780 x 430 mm Bore range: Diameter: 10-600 mm Return speed: 40 m/min Cutting speed: 0-16 m/min Total power requirement: 8 kW Machine weight approx. 1.55 t Space requirement approx. 1.8 x 2 x 2.25 m Foundation depth: can be omitted (1.07) m because the machine looks on a steel platform A number of accessories available

NIDEC ARISA S-2-500-240-120-FD mechanical press was built in 2006 in Spain by Nidec Press & Automation Co. (NP&A). It is an extremely versatile press that is used in the series production of components for the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, i.e. precise punching and stamping of metal parts. In addition to its standard purpose, with the appropriate tooling and material feeding systems, the machine can also be used as a transfer press or progressive press. All processes are performed with a high press force of 500 tonnes. The drive system of the NIDEC ARISA S-2-500-240-120-FD press is based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution guarantees even torque transmission and a smooth working cycle. The slider, on the other hand, is guided in multiple points by rolle ...

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

VORONEZH K8544 Hot Forging press YEAR : 1980 / 2008 OVERHAUL AND INSTALLED FORCE : 2500ton RAM STROKE : 350 mm RAM SIZE : 1120X1070 mm TABLE OVERALL SIZE : 1400X1200 mm NUMBER OF STROKES IN CONTINUOUS MODE : 60 NUMBER OF STROKES IN MANUAL MODE : 26 SHUT HEIGHT : 890 mm STROKE OF UPPER KNOCK OUT : 60 mm STOROKE OF LOWER KNOCK OUT : 70 mm MAIN MOTOR : 132KW (CHANGED TO HYUDAI HEAVY Y2012) PRESS OVERALL DIMENSION : 5380X4680X6400 mm HYDRAULIC BOLSTER NEW IN 2007 CONDITION : VERY GOOD WORKING CONDITIONS Trimming press available

Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton

sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...

Capacity: 800 tons Stroke of slider: 400 mm Number of strokes per minute 12 Adjustment of slider: 185 mm Max. daylight betwen bolster and slider SDAU: 850 mm Table area: 1250 x 1650 mm Slider dimensions 1000 x 1250 mm Main motor power: 55 kW Distance between columns 1250 mm Cushion capacity, ton 125 Cushion stroke, mm 160 Press dimensions, mm 3800 x 2800 x 6900 Weight: 77 tons

Maximum force ton-force 400 Slider stroke length mm 400 Slider strokes per minute 25 Maximum distance between table and slider (in lower position of slider) mm 470 Size of adjustment of distance between down-stamp a plate and slider mm 160 Table overall dimensions: mm ·from front to rear 1000 ·from left to right 1000 Slider overall dimensions: mm ·from front to rear 800 Main electric motor power kW 40 Press overall dimensions mm ·length 3470 ·width 3140 ·height 5940 Press weight kg 32600

LVD brand press - type TPI 80/25 - 80 ton

Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4410 10” Stroke 33” Shut Height 36” x 36” Bed 80 Strokes Per Minute Partially Rebuilt Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4621 10” Stroke 32” Shut Height 36” x 32” Bed 80 Strokes Per Minute Bolsters are included. Both presses are in working condition and under power.

Bombled 2100 x 4 mm Max sheetthickness: 4 mm Cuttinglength: 2100 mm Strokes/min: 33 str/min Electric motor (power): 5,5 kW Length : 3500 mm Depth : 1500 mm Height: 1100 mm Weight: 3100 kg

Type: 82.25 Max sheetthickness: 2 mm Cuttinglength: 2540 mm Electric motor (power): 3 kW Weight: 1600 kg

Copper plate for lapping machine. Dia 600mm, NEW, make: Melchiorre, Mimu Machine Tools Gussago BS Italy, Lapping is a machining process in which two surfaces are rubbed together with an abrasive between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called grinding), involves rubbing a brittle material such as glass against a surface such as iron or glass itself (also known as the lap or grinding tool) with an abrasive such as aluminum oxide, jewellers rouge, opticians rouge, emery, silicon carbide, diamond, etc., between them. This produces microscopic conchoidal fractures as the abrasive rolls about between the two surfaces and removes material from both., The other form of lapping involves a softer material such as pitch or a ceramic for the lap, which is charged with the abrasive. The lap is then used to cut a harder mate ...

sheet width: 1050 mm plate thickness: 2,0 mm distance between columns: 1050 mm down holder: 1 Stück fence: Tisch 80 - 480 mm fence: Breiten 0 - 600 mm table-size: 1300 x 600 mm work height max.: 760 mm total power requirement: manuell kW weight of the machine ca.: 413 kg. range L-W-H: 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down ...

gebr. Post-bending press Fabr. Graebener, Type GRNM, YOC 2005 max. bending force 16 t. Tool length 1,600 mm Adjustment of the underswing, hydraulic 2 cylinders Dimensions 5080 x 3290 x 2540 mm Kj Uovvlllerhyxkenb Weight 65 t.

Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 E5931468 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

1 Pc Used Single Column Carousel Lathe Make STANKO Mod. 1514 Bauj. 1988 Face plate diameter 1400 mm Circumferential diameter 1600 mm Turning height 1000 mm Workpiece weight 8 t Face plate speed range 3Stages 1 - 355 rpm Main drive motor 55 kW Machine weight approx. 25 t CNC SIEMENS SINUMERIK 810T 1 pc. used two-stand vertical lathe Brand STANKO Mod. 1514 year of construction 1988 Face plate diameter 1400 mm Swing diameter 1600 mm Turning height 1000 mm Workpiece weight 8 t Face plate speed range 1 - 355 rpm Main drive motor 55 kW Machine weight approx. 25 t CNC SIEMENS SINUMERIK 810 T

Hoort bij Lijn -gt; P.14d 15917

Kircheis 2100 x 3 mm Max worklength: 2100 mm Max tickness: 3 mm Length: 3250 mm Depth: 800 mm Hight : 2000 mm Weight: 2,5 ton

Type: 230 Maximale buighoek: 180° Max worklength: 2040 mm Max tickness: 1,5 mm Distance between clampblock -- ram: 100 mm Eletric motor (power): 0,75 kW Weight: 1000 kg

This SEYI SN1-110 was manufactured in 2002. It is a mechanical C-frame crank press with a 110 tons capacity and a stroke of 110 mm. The machine offers an adjustable speed range of 35–65 SPM, a maximum die height of 350 mm, and a main motor of approximately 11 kW (15 HP). Contact us for more information about this machine.

This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information.

This RAVNE PRESSES Manzoni 315 stamping machine was manufactured in 1992. It features a robust eccentric H-frame, monoblock design with a press force of 3150 kN and a drive power of 60 kW. It has a fixed stroke of 200 mm and slide dimensions of 2550 x 1250 mm. If you are looking to get high-quality stamping capabilities, consider the RAVNE PRESSES Manzoni 315 machine we have for sale. Contact us for more information.

This stamping machine was manufactured in 1992. It features a robust Eccentric H-frame, monoblock design with a press force of 1600 kN and a fixed stroke of 160 mm. The machine includes a magnetic conveyor for scraps, a quick die cart system, and a millutensil oiling system. Ideal for high-quality stamping capabilities, consider the RAVNE PRESSES Manzoni 160 machine we have for sale. Contact us for more information about this machine.

Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between table and slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

Mechanical stamping press manufactured in 2002. This PRESSIX 160 CNR 6 features a capacity of 160 tons and an adjustable stroke ranging from 20 to 200 mm. It operates at a speed of 20 to 70 strokes per minute and includes a motorized slide adjustment of 100 mm. The table dimensions are 1100 x 700 mm, providing ample workspace. If you are looking to get high-quality stamping capabilities, consider the PRESSIX 160 CNR 6 machine we have for sale. Contact us for further details.

Mechanical stamping press manufactured in 2004. This AIDA NC2-1600(2) features a pressing force of 160 tons and a slide stroke of 200 mm. It has a slide area of 1500 x 580 mm and a bolster area of 2040 x 760 mm. If you are looking to get high-quality stamping capabilities, consider the AIDA NC2-1600(2) machine we have for sale. Contact us for further details.