підкатегорій
(рретій рівень категорії)
Виробник:
(Категорія: 103)
x-travel: 300 mmy-travel: 160 mmz-travel: 290 mmtable surface area: 600 x 210 mmtool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1,2 m/minspindle motor: 1,5 / 1,9 kWtotal power requirement: 9,5 kVAweight of the machine ca.: 830 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine is in very good condition and comes from atraining workshop.Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123- Manual mode: Manual operation and positioning with manual input- Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing ManualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-axis: 5000 mmy-axis: 4000 mmz-axis: 1400 mmdistance between columns: 3500 mmspindle motor: 22/26 kWspindle turning speed range: 6000 U/minrapid traverse: 15 m/mintable-size: 5020 x 3000 mmworkpiece weight: 16 tControl: FANUC 0i-iMF distance table - lower edge spindle: 200 - 1600 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m5 Sided Machining Center equipped with:- CNC Control FANUC 0i-MF (10.4 LCD)- ATC 60-fold (BT 50)- Coolant through Spindle- X/Y/Z axis linear guide way- X/Y linear ScalesHeads:-- 90 degree head (auto 5 degree indexing)-- 200mm extension 90 degree head (mounted on table)-- 350mm extension head (mounted on table)- Air conditioner- Oil skimmer- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 710 mmy-travel: 600 mmz-travel: 500 mmNC-rotary table: 630 mmspindle taper: SK 40 spindle turning speed range: 18 - 6300 U/mincontrol: DIALOG 4 feed: 2 - 3600 mm/minrapid traverse: 6 m/mintable load: max. 485 kgquill stroke: 80 mmspindle drive: 9,5 kWtotal power requirement: 20 kVAweight of the machine ca.: 4,6 tdimensions: 3,8 x 2,24 x 2,35 mAccessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 485 mmy-travel: 385 mmz-travel: 380 mmtable surface area: 800 x 460 mmspindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/minfeeds: 10 - 1000 mm/minrapid traverse: 2 m/mintable load capacity: 600 kgquill stroke: 80 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,0 tdimensions: 2,4 x 1,7 x 1,98 mAcc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant- movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Equipped with various add-on parts divided over 4x pallet Auction-ID: A1-43823-49
Bore spindle stroke 120mm, variable rpm, cross feed Auction-ID: A1-43823-13
Control: Siemens 810 Main drive Number of spindles: 1 Spindle speed range: 12000 1/min Tool holder: Sk 40 Movement X-axis movement: 640 mm X-axis feed: 0-40 m/min X-axis feed force: 7000 N X-axis rapid traverse: 60 m/min X-Axis Precision: 0.027 Y-axis movement: 600 mm Y-axis feed: 0-40 m/min Y-axis feed force: 7000 N Y-axis rapid traverse: 40 m/min Y-Axis Precision: 0.024 Z-axis movement: 500 mm Z-axis feed: 0-40 m/min Z-axis feed force: 7000 N Z-axis rapid traverse: 40 m/min Workpiece Workpiece Z: 500 mm Max. table load: 600 kg Work table Tool Changer Available grooves: 30 Max. weight of tools: 7 kg Max. diameter of the tools: 140 mm Auction-ID: A7-44493-264
Technical data travels: X-axis (longitudinal): 300 mm. Y-axis (transverse): 150 mm to 160 mm. Z-axis (vertical): 330 mm to 340 mm. Spindle & Drive: Tool holder: SK40 (S20x2 tightening thread). Speed range: 40 – 2000 rpm (often in 16 steps or 2 gears). Feed: Infinitely adjustable in all three axes on the active version. Dimensions & Weight: Table size: Approx. 600 x 210 mm as standard. Auction-ID: A7-44493-145
Technical details x-travel 300 mm y-travel 160 mm z-travel 340 mm Tool holder SK40 Speed 40-2000 rpm Table size 600 x 210 mm Total power requirement 2 kW Auction-ID: A7-44493-42
Table size: 800 × 360 mm Travel (X/Y/Z): 500 / 375 / 350 mm Spindle speed: 63–4000 rpm, infinitely variable Tool holder: ISO 40 Quill stroke: 50 mm Feed range: 1–6000 mm/min Rapid traverse: 1.5 m/min (X,Z), 1 m/min (Y) Clamping surface: 254 × 354 mm, 1 T-slot Dimensions Length: 1500 mm Width: 2000 mm Height: 1812 mm Weight: approx. 1650 kg Auction-ID: A7-44493-147
machine Manufacturer: DECKEL MAHO Type: DMU 35 M Year of Make: 2001 Machine type: CNC universal milling center (3+2 axes) data Feed drive: AC servo motors for X, Y, Z axis Feed speed X/Y/Z: infinitely programmable up to 5,000 mm/min Rapid traverse X/Y/Z: 5 m/min Input unit X/Y/Z: 0.001 mm Work table: rotary table with swivel axis Clamping surface: 400 × 280 mm T-slot spacing / size: 50 / 12 H7 Centering bore: Ø 30 H6 Rotary table rotation range: 360° Desktop clamping: mechanical Swivel range: 105° / 15° Permissible load rotary table (centre of the table): 100 kg Dimensions Travel X/Y/Z: 350 × 240 × 340 mm Weight: approx. 1,700 kg Electrical details Voltage: 400 V Power: approx. 15 kVA Auction-ID: A7-44493-2143
Bokö Universal Milling Machine Hydromill Box dimensions: H:900 W:500 L:600 Weight: 5000kg Auction-ID: A7-44493-121
Technical data travels: X-axis (longitudinal): 300 mm. Y-axis (transverse): 150 mm to 160 mm. Z-axis (vertical): 330 mm to 340 mm. Spindle & Drive: Tool holder: SK40 (S20x2 tightening thread). Speed range: 40 – 2000 rpm (often in 16 steps or 2 gears). Feed: Infinitely adjustable in all three axes on the active version. Dimensions & Weight: Table size: Approx. 600 x 210 mm as standard. Auction-ID: A7-44493-53
x-travel: 850 mmy-travel: 500 mmz-travel: 500 mmtaper: ISO 40 P.D.B. table-size: 400x1250 mmvolt: 400 VControl: Heidenhain TNC 355 total power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 10500 mmy-travel: 1200 mmz-travel: 1600 mmcontrol: Heidenhain TNC 426-CA taper ISO: 50 P.D.B. Table dimensions: 1100 x 12000 mmspindle speeds: 20 - 2000 mmvoltage: 380 Vtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 12000 mmy-travel: 2000 mmz-travel: 1000 mmcontrol: E.C.S. 2351 taper ISO: 50 P.D.B. Table dimensions: 450 x 450 mmspindle speeds: 0 - 1500 mmtotal power requirement: 35 kWweight of the machine ca.: tdimensions of the machine ca.: mMist extractionChip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 720 mmy-travel: 360 mmz-travel: 420 mmtaper: ISO 40 table-size: 1000x320 mmvolt: 400 Vtotal power requirement: 5,5 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: mUniversal milling headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 8000 mmy-travel: 2500 mmz-travel: 1000 mmcontrol: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mmvoltage: 380 Vtotal power requirement: 27,6 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mmy-travel: 500 mmz-travel: 600 mmtaper: ISO 40 P.D.B. table-size: 500x1250 mmvolt: 400 VControl: Heidenhain TNC 410MA total power requirement: 10 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1250 mmy-travel: 1000 mmz-travel: 1000 mmtaper ISO: 50 Table dimensions: 650 x 1000 mmspindle speeds: 32-1600 voltage: 380 VControl: Philips total power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 890,820 mmturning length: 4000 mmcontrol: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mmcross movement: 500 mmquill stroke: 140 mmtailstock adjustment: 3708 mmspindle turning speed range: 5-1800 U/minmilling tool taper: 1500-6000 U/minfeed: 0,5-5000 mm/minrapid traverse: 15 m/minfeed power: 22000/10000 NTool changer: 95 St.steady: CNC tail stock: CNC total power requirement: 50/69 kWweight of the machine ca.: 23,5 tdimensions of the machine ca.: 10x4x3,3 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your ...
x-travel: 500 mmy-хід: 400 mmz-хід: 400 mmЗагальна потужність: 4,4 kWweight машини приблизно: 2 t-розміри машини приблизно: 222,2 mДані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
x-ход: 1500 ммМІ-ход: 800 ммМЗ-хід: 800 мм-розмір таблиці: 2.200 x 750 мм Ручне колесо: Чорнило. кількість швидкостей шпинделя: 3 000 U/хв/об/об/оберт Привод шпинделя: 15 кВт конус інструменту: SK - 50 Керування: Heidenhein TNC 426 загальна потужність: 30 кВт вага машини приблизно: 9,5 трозмірності машини приблизно: mДані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
x-travel: 720 mmy-ход: 220 mmz-хід: 450 мм tabletable площа поверхні: 1000x310 мм вага машини приблизно: 1.500 кгРозміри машини приблизно: 2000x1200x1800 ммДані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
spindle taper: 2 x SK 40 forward bearing diameter: 110 mmmilling head speed: 100 - 4500 U/minmilling drive: 5,1 kWworkpiece length - max.: 830 mmworkpiece dia. with double equipment: max. 135 mmtaper diameter: 78 g6 mmcentre height: 260 mmturning speed range - stepless: max. 15 U/mindistance of spindles: 135 mmspindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mmFeed speed: max. 6 m/min.surface area: 200 x 1750 mm: tool post (Z-axis): stroke of tool slide: 120 mmFeed speed: max. 2 m/min.column movement: 200 mm: tail stock: tailstock quill stroke: 100 mmmorse taper: 3 MKcentre height: 260 mmaxial distance of the quills: 135 mmpassage of steadyrest: 40 - 80 mmcontrol: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 twith SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolantThe data for this ...
x-travel: 2800 mmy-travel: 1000 mmz-travel: 1200 mmtable surface area: 2000 x 800 mmrotary table dia.: 800 mmspindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/minmax. torque on the spindle: 3000 Nmspindle drive: 30 kWfeeds longditudinal/cross/vertical: 2 - 2000 mm/minrapid motion -longitudinal/cross/vertical: 7 m/mincontrol: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mmwotkpiece diameter with 2 vacant positions: 200 mmworkpiece length: 400 mmweight of tools max.: 16 kgtool changing time: ca. 8 - 9 secinternal coolant system feed: ja / yes total power requirement: kWweight of the machine ca.: 25,4 t= 5-axis CNC-bed-type milling machine with integrated NC-rotary table andNC-swivelling milling head -Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump and filtration ...
x-хід: 500 ммМІ-ход: 350 ммМГц-хід: 375 ммЦифрове зчитування: AKTIV - Діапазон швидкостей повороту Digitalanzeige: 63 - 4000 U/міншпиндель конус ISO: 40 площа поверхні таблиці: 800 360 мм загальна потужність: 3 кВт вага машини приблизно: 1,5 т розмірів машини приблизно: 2 2 2 м Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
500 € 
