Модель
(Виробник: LIEBHERR)
Key data: 515 KW, 400 V
3 генераторні установки Liebherr G9512 на природному газі Обсяг поставки: двигун, генератор, базова рама, пульт управління (MOTORTECH), газопровід, радіатор, вихлоп. Доступний для продажу на біржі газових двигунів. Будь ласка, ознайомтеся з повним асортиментом нашого обладнання на gasengineexchange.com.
Key data: 569 KW
Генераторна установка на біогазі 2G Agenitor 412 Модель: 2G Agenitor 412 Потужність: 569 кВт Паливо: Біогаз Рік випуску: 2017 В: 400 ГЦ: 50 Годин: 9 000 Масштаб: Двигун, генератор, базова рама, пульт управління, газопровід.
max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024
max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024
max. wheel diameter:900 mm max. module:10 weight of the machine ca.:8200 kos. hob dia. - max.:190 mm cutter length max.:320 mm milling spindle speeds (infinitely variable):13-80 U/min workpiece length - max.:750 mm max. workpiece diameter:150 mm Counter holder milling mandrel is missing
max. wheel diameter:280 mm max. module:5 min. module:1 min. number of teeth:7 toolpiece turning speed range:4.000...10.000 U/min tool length:210 mm CBN
max. wheel diameter:180 mm max. module:7 hob turning speeds:200-2000 U/min min. number of teeth:4 excluding conveyor belt
max. wheel diameter:780 mm gear width:130 mm max. module:10 weight of the machine ca.:8,5 t no. of strokes:30 Hub/min Hier fully functional machine, Little used There are some Tools and Change gears Liebherr WSC501 CNC gear shaping machine, used, ready for use Manufacturer: Liebherr Type: WSC 501 Mach.- No.: 4407/05 Year of manufacture: 1985 Details: Max. gear shaping module: 8mm (30°gears possible up to module 10°) Max. gear width: 130mm Diameter of the machine table: 500mm Maximum wheel diameter: 780mm Shut height ? table: 650mm Stroke rate min. 30DH/min Continuously adjustable max. 1500 DH/min. Operating voltage: 380V Frequency: 50Hz Control voltage: 110V Connected load: 36 kVA Rated current: 55A Weight: 8500kg Dimensions: approx. 4,85 x 3,655 x 3,78 (width x depth x height in m) The machine has seen only very limited use in our company. It remains fully operational and can be dem ...
max. wheel diameter:300 mm max. module:7 weight of the machine ca.:15 t table turning speeds:100 U/min table diameter:180 mm hob turning speeds:750 U/min max. hob diameter:160 mm cutter length max.:230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion
max. wheel diameter:300 mm max. module:7 weight of the machine ca.:15 t table turning speeds:100 U/min table diameter:180 mm hob turning speeds:750 U/min max. hob diameter:160 mm cutter length max.:230 mm Liebherr LC300 with loading automation Machine without counter holder Used to work with oil
max. wheel diameter:180 mm max. module:5 min. module:1 weight of the machine ca.:14 t dimensions of the machine ca.:4,5 x 2,84 x 2,8 m min. number of teeth:7 toolpiece turning speed range:4000-10000 U/min tool length:210 mm With tail stock No dressing device Only CBN
max. wheel diameter: 180 mm table diameter: 145 mm max. module: 3-5 mm gear width: 250 mm table turning speeds: 800 U/min milling head vertical adjustable: 400 mm Milling axis swiveling range: + / - 45 ° max. milling cutter diameter: 90 mm hob turning speeds: 0 - 6000 U/min cutter length max.: 211 mm control: Siemens 840 D total power requirement: 23 kW weight of the machine ca.: ca. 10 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m The LC series is a machine system for the machining of spur and helical gears and cylindrical gear shafts and helical gears and cylindrical gear shafts, which is characterised by its special performance and versatility. Compared to other gear manufacturing processes, gear hobbing is characterised by its characterised by its high consistency of machining results over the entire tool life. Technical data of the machine: Basic specifications: --> Machining ...
max. wheel diameter: 180 mm gear width: ca. 220 mm max. module: 3 / 5 mm Control: Siemens 840D sl max. radial velocity: 5000 mm/min max. workpiece diameter: 180 mm table rotation speed: 800 U/min table diameter: 145 mm axial travel: 250 mm mm back rest:: axial travel: 300 mm clamping force max.: 13 kN milling head:: swivelable +/-: 45 ° drive capacity: 23 kW turning speeds: 6000 U/min diameter of tools max.: 90 mm tool clamping length max.: 211 mm module hobbing max.: 3 module profile milling max.: 5 tangential speed max.: 7500 mm/min weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 3000 mm gear width: 500 mm max. module: 25 / 40 spindle turning speed range: 250 U/min feed speeds: max. 4000 mm/min faceplate diameter: 2000 mm table bore diameter: 700 mm table turning speeds: 51 U/min power capacity - milling spindle: 53 kW drive motor for milling spindle: - kW axial adjustment: 1200 mm milling head swivable ca.: +/- 45 ° control: Siemens 840D total power requirement: - kW weight of the machine ca.: 55 t - CNC Control Siemens 840D - Internal Hob Head IFK - External Hob Head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 265 mm gear width: 45 mm max. module: 4 min. module: 0,3 max. workpiece diameter: 300 mm stroke length max.: 0-50 mm stroke position adjustment: 25 mm distance work spindle /surface of the table: 170/245 mm spindle taper: innen MK 4 table-size: 180 mm table hole: 95/75 mm strokes per minute: 450 - 840 total power requirement: 10 kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m : : : : : : : Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 m ...
Серійний номер: 630-8394 Вихідна потужність: 210 кВт Кількість робочих годин: 9050 годин з подовженою стрілою, тип: LO4651B, серійний номер 3001335 Примітка: Longfront має довгу та коротку стріли! Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
Модуль: 10 діаметр: 180 мм Діаметр циліндра: 40 мм ширина: 75 мм: 2 Вага: 14 кг Фрезерний фрезер — новий і без ознак використання Інші вживані зубчасті фрезери до модуля 10on запитуДані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
модуль: 4 діаметр: 180 мм Діаметр циліндра: 40 мм ширина: 67 мм: 5 вага 15 кг Фрезерний різак — новий і не має ознак використання. Інші вживані зубчасті різці з пініон-групами до модуля 10 за запитом. Дані для цього оголошення були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm max. workpiece diameter: 1500 mm Control: Siemens 840 D table diameter: 900 mm Table hole Diameter / depth: 320 / 520 mm max. table load: 95 kN coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm work-spindle diameter: 125 mm tool taper: SK 45 DIN Table rpm: 12 1/min power requirement: 30 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 11,715 x 5,565 x 4,505 m Strokes: - Stroke length min./max.: 0 mm / 270 mm - Stroke length adjustment range: 270 mm - Stroke rate (double strokes): 10 to 270 strokes/min Sliding head carriage: - Max. travel speed: 5000 mm/min Machine bed: - Axial travel: 600 mm Slotting head: - Max. module for rolling slotting: 16 mm - Slotting spindle diameter: 125 mm - Max. tool diameter: 30 ...
max. wheel diameter: 500 mm gear width: 400 mm max. module: 10 mm Control: SIEMENS Sinumerik 840D sl max. workpiece diameter: 500 mm Max. Distance from table to counterholder: 1.120 mm Max. Distance table to center of milling spindle: 585 mm Min./max. center distance between milling spindle: 50/475 mm table diameter: 420 mm table hole - depth: 150 mm Table equipped with hydraulic clamping device: : milling spindle: : milling spindle speeds: 48- 480 1/min stufenlos milling head swivelling angle: +/- 50 A-Achse Grad tool taper: SK 40 Tangential path of the milling carriage: 200 mm milling cutter diameter: 170 mm Max milling width: 250 mm electrical supply data: : voltage: 400 V operating frequency: 50 Hz connecting power: 55 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 6,2 x 4,2 x 3,e m Equipment and Accessories • High-performance CNC gear hobbing machine LIEBHER ...
max. wheel diameter: 2500 mm gear width: 750 mm max. module: 18 / 22 min. module: table diameter: 1800 mm min. number of teeth: 12 table hole: 300 mm hob turning speeds: 20 - 100 U/min table load: 10 t milling cutter dia. x width: 250 x 340 mm shifting: 150 mm feeds - tangential: 0,25 - 3 mm/min feeds - radial: 0,07 - 1,5 mm/min feeds - longitudinal: 0,55 - 3,5 mm/min milling feeds: 13,4 - 80 (Einzelteilen) mm/min total power requirement: ca. 30 kW weight of the machine ca.: 28 t - change gears, arbors, toolings, clamping plots - universal hob head - swiveling outer steady - single indexing device party overhauled in 2023 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm control: Liebherr PC-NC max. workpiece diameter: 1500 mm table diameter: 900 mm table bore diameter: 320 mm max. table load: 95 kN power capacity: 30 kW coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm Shaping spindle diameter: 125 mm tool taper: SK 45 DIN weight of the machine ca.: 26 t dimensions of the machine ca.: 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 380 mm gear width: 200 mm max. module: 6 min. module: Control: SIEMENS Sinumerik 840D working area: - max. gear diameter: 380 mm max. workpiece diameter: 400/ 600 (800) Außen innen beg max. gear width: 200 mm Center distance between gear head and table center: -50 / 450 mm Travel range of the lifting position: 250 mm Max. module for straight gearing: 6 mm Max. axial travel: 250 mm work table:: - table diameter: 400 mm table hole: 150 mm max. table speed: 30 1/m no. of T-slots: 6 St. Table equipped with hydraulic clamping device: - Multi-interface for pallet loading and zero-point: - clamping system in the working area: Shaping Head and Lift-off Cam:: - Drive power of face milling head: 37 kW Max. stroke rate: 600 DH/min Face milling head axis angle adjustment: +/- 0,5 ° spindle cone: HSK-B100 DIN 69893 taper of shaper cutter: 60 work-spindle diameter: 110 mm Stro ...
у 40 приглушених контейнерах, 7500 годин після ремонту, KWe: 240, Робочі години: 7500
Engine Brand: LIEBHERR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 390 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/liebherr-d856-a7-new/243, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: D856 A7; Transport weight [kg]: 1100
Engine Brand: LIEBHERR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 390 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/liebherr-d856-a7-new/42, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: D856 A7; Transport weight [kg]: 1090
Engine Brand: LIEBHERR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: No Flywheel , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Starter Voltage: No Starter Present , , https://www.hamofa.com/stock/diesel-engines/liebherr-g924-used/607, , = More information =, , Type: Engine, Empty weight: 680 kg, Type number: G924
Engine Brand: LIEBHERR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 00 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 713 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://hamofa.hamofa-bb.be/stock/diesel-engines/liebherr-d9512-a7-04- new/42294, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 4.587 kg, Type number: D9512 A7-04
