Інші фрезерні верстати (28)

Рік виготовлення: 2015 Тип машини: BC 1001 HS Загальна кількість годин виробництва: 1608 годин Загальний час очікування: 5070 годин

Auction-ID: A1-41277-3

Фрезерний верстат TOS KURIM FRO 6, FRO8

CBM Machines milling machine in good general condition, equipped with an automatic feed and many tool holders/accessories visible in the photos. Robust and functional machine, ideal for precision machining work. The whole is clean and maintained, with lubrication present and mechanical elements in good working order. Operates in 220/380 V – 2800 rpm. Auction-ID: A3-43538-36054

Інв. Номер : 8658 Тип: AF 221 Виробник: Elumatec Рік створення: 1997 Параметри: Максимальна швидкість: 2800 1/хв

Auction-ID: A1-41277-97

Шліфувальний, полірувальний, фрезерний верстат Специфікації: - Швидкості від 850 до 12000 об/хв - Гнучкий вал прибл. 2 метрів - Пересувна ходова частина - Підходить для шліфувальних і полірувальних інструментів - Привід 380 В / 1,0 к.с. - Потреба в просторі приблизно. Ш 500 x В 1000 x Г 500 мм - Вага приблизно. 45 кг - Пересувна ходова частина

HORIZONTAL BORING AND MILLING MACHINE IVO LOLA RIBAR BH 90 Working spindle inside ISO ISO 50 Number of rpm from 20 do 2000 min-1 Working table 920 x 1000 mm Z-axis 1000 mm X-axis 1000 mm Y-axis 800 mm Machine move from 0,03 till 12 mm/1 rpm Machine weight 9.500 kg Auction-ID: A7-47067-15

Малий свердлильно-фрезерний верстат ISERT ELECTRONIC Хід X: 350 мм Хід Y: 300 мм Хід Z: 70 мм Обертання: 8000 / 9500 / 13500 / 20500 / 24000 об/хв Верстат можна використовувати для свердління друкованих плат або інших цілей. Управління машиною здійснювалося через ПК, якого вже немає. Можливість використання в ручному режимі Оснащений: 1 фрезерним верстатом KRESS Напруга: 220 В моно Розміри (Д х Ш х В): 950 х 700 х 700 мм Вага: приблизно 60 кг

Worktable size 710x710 mm, including cabinet with various accessories Auction-ID: A1-43894-4

Джиг-свердлильний/фрезерний верстат HAUSER 3DR Хід X: 400 мм Хід Y: 200 мм Хід Z: 400 мм Шпиндель: 2 швидкості Конус:СМ2 Вихід шпинделя: 120 мм 2 діапазони швидкостей 60-1500 об / хв / 1500-3000 об / хв Розмір столу: L 590 мм x W 320 мм Варіатор швидкості на шпинделі 2 аванси Автоматичний спуск: 0,03 мм/хв - 0,06 мм/хв Функціонал осі X з пристроєм Mitutoyo Вісь Y і Z: дефектна шкала Напруга: 380 В Ширина: 1500 мм Глибина: 1700 мм Висота в низькому положенні: 1800 мм Вага: приблизно 1,5 Т

The conception of the basic machine is characterized by the following features: - horizontal position of the workpiece spindle; vertical position of the milling cutter spindle or of the milling head - The workpiece is picked up between the workpiece headstock (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The shift milling head is equipped with automatic angle adjustment (A-axis); the shift slide (Y-axis) moves tagential to the Workpiece diameter - CNC controlled - IBH control - Charging device - a lot of accessories Technical data: - Largest millable module with hobs according to DIN 8002: 4.5 mm - Largest millable module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Max. workpiece nozzle for manual loading: 200 mm - Max. workpiece nozzle for autom ...

Year of manufacture approx. 1980, wheel diameter: 406mm, wheel width 420mm, module min.-max.: 0.5-+4.3, milling cutter speeds 49-246 rpm Auction-ID: A1-47017-11

Waelzfraeser with shaft FETTE 2356808 GN461 DIN3968AAA 002.90 2697.1 02 m³ L1 E= 20° DIN3972 I - Stgs. 1°24 pz9.4276 HN PM3 Auction-ID: A1-47017-19

Gear hobbing machine – vertical: Make: Pfauter Type: P 630 Year of manufacture: unknown Control type: conventional Technical details: - Condition good - Wheel diameter - max. 630 mm - Wheel width 375 mm - Module - max. 10 - Clamping table 550 mm - Table bore 125 mm - Milling cutter speeds infinitely variable 62 - 390 rpm - Mounting cone MORSE 5 - Axial feeds 0.40 - 6.80 mm/rev - Radial feeds 0.10 - 1.76 mm/rev - Distance between milling spindle and clamping spindle 50 - 425 mm - Tooth count range min. 8 - Milling cutter diameter x width 192 / 215 mm - Milling cutter displacement 200 mm - Main drive motor 7.5 kW - Total power requirement 21 kVa - Machine weight approx. 8.2 t Additional information: Equipment of Machine: - Universal milling head with tangential displacement - Pressure reducing valve for counter holder - Magnetic chip conveyors Auction ...

Year of construction: approx. 1981 Accessories: - Universal milling head, tangential milling head, - Interchangeable wheels - 2 cutting equipment, - little used Auction-ID: A1-47017-85

Workpiece diameter at ratio 1:10 = 300mm, workpiece diameter at ratio 1:1 = 212 mm, number of teeth: 6-200 Auction-ID: A1-47017-39

Milling machine Mikron WF 21C Year of Make: 1996 Technical data X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Clamping table Vertical clamping surface: 300 x 450 mm Number of threaded holes: 2 x 6 Auction-ID: A1-46872-37

Serial number: 07400003691operating hours read: 88,040Spindle hours read: 43,558Spindle speed range: 3200/5000 rpmRotation diameter: 270 mmTurning diameter: 120 mmSpindle distance: 900 mmTravel X1: 290 mm TravelZ1: 650 mmTravel X2: 180 mmTravel Z2: 650 mmTravel Y1: +- 40 mmTravel Z3: 670 mm TravelX3: 175 mmMax. rod diameter: 100/104 mmSpindle bore diameter: 118 mmRapid traverse speed X- and Z-axis: 30 m/minRapid traverse speed Y-axis: 15 m/minNumber of driven tools per tool carrier: 12Control: SIEMENS SINUMERIK 840 D POWERLINEincl. chip conveyorwith 2 tool turrets - each with 12 tool positionsmain and counter spindles, as well as foot switchesAttention, the machine has the following defects:-the B-axis is defective (sits on turret 1)-the guides and drives are worn according to their age-X2 axle (guide rails) runs a bit crookedin the range of 0.03 mm (would have to be remeasured), sporad ...

incl. contact surfaces on the right and leftReference: Groven - Lot 8 Auction-ID: A7-46763-310

Serial number: 24952Travels: X: approx. 300 mmY: approx. 450 mmZ: approx. 150 mmwith STEPCRAFT MM1000 milling unit, year of manufacture 2019Reference: Wittner - Lot 64 Auction-ID: A7-46763-375

Serial number: 100135Power: 1.1 kWMax. spanwidth: approx. 250 mm Auction-ID: A7-46287-191

Serial number: 36434Operating voltage: 380 - 415 VConnection: 1.5 kWSpeed: up to 1400 rpmRated current: 5.7 ASpeed: from 70 to 2590 rpmDrilling depth: up to 170 mmTable dimensions: 650 x 270 mmwith three groovesincl. three-axis digital display from the manufacturer HEIDENHAINalso an attached vice, jaw width: 85 mm and a matching dividing head Auction-ID: A7-46287-93

Serial number: 07510001241operating hours read: 72,899Spindle hours read: 39,361Control: SIEMENS SINUMERIK 840 DRotation diameter: 640 mmTurning diameter: max. 640 mmTurning diameter Sub-spindle: 400 mmSpindle distance: 1500 mmTurning length:1185 mm Max. workpiece weight: 150 kgSlide path X1: 550 mmSlide path Y1: 180 mmSlide path Z1: 1185 mmSlide path B1: 240 °Slide path X2: 180 mmSlide path Z2: 1050 mmSlide path Z3: 1150 mmSpindle speed range: 3200/4000 rpmRapid traverse speed of slide 1 (X/Y/Z): 40/24/70 m/minRapid traverse speed of slide 2 (X/Z): 24/36 m/minRapid traverse speed of slide 3 (Z): 36 m/minTool holder: HSK 63Spindle speed: 12,000 rpmincl. the tool holders on the turretincl. bar feeder, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, Year of manufacture: 2008, Serial number: CNCDB-08.306, Weight: 1500 kgNumber of tool positions in the chain magazine: 40 piecesAttention t ...

Serial number: 100451Clamping surface: approx. 400 x 120 mmwith hand lever operation Auction-ID: A7-46287-200

X-travel: 600mm, Y-way:450mm, Z-travel: 450mm; Machine Number: 14772; Table size approx. 800x460mm; Speed max. 10000 rpm, 30-fold tool changer, Tool holder: SK40; Max. table load: 1000kg; Control: Heiden-Hain: TNC430 ; incl. tool cabinet, equipped with tool holders and tools; incl. chip conveyor Auction-ID: A7-46619-280

DECKEL FP4A – 3-Axis CNC Milling Machine General data: Manufacturer: Deckel Model: FP4A Machine type: CNC milling machine Configuration: 3-axis Description: CNC milling machine DECKEL FP4A designed for precision machining operations. The machine offers reliable performance and flexibility for various milling tasks, making it suitable for toolrooms, workshops, and industrial production environments. Auction-ID: A7-46498-60

ZAYER 4BM horizontal milling machine Technical characteristics Brand: ZAYER. Model: 4BM. Serial number: 35121. Type: Horizontal milling machine. Motor power: 11.75 HP. Power supply: 220 V. Frequency: 50 Hz. Phases: 3. Intensity: 32 A. Untested operation. The batch is delivered loaded by truck. Dismantling and loading costs are indicated as additional costs. Auction-ID: A7-46053-1