зварювальні станки б/у для продажу (1,749)

Welding helmet model 2. This automatic welding hood is suitable for all welding processes. Viewing window size approximately 93x43 mm with UV and IR protection. Switches off automatically. Blackout degree infinitely adjustable from the outside from DIN 9 - 13. Filter switch-on speed: 1/25000 second, from light to dark. Response time filter 0.6 seconds, from dark to light. Fully adjustable bridle with washable sweatband. Works on solar cells and if necessary on AAA batteries, battery life approximately 4000 hours, including AAA batteries. CE approved. Auction-ID: A1-40417-191

Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-44803-294

Welding helmet model 1. This automatic welding hood is suitable for all welding processes. Viewing window size approximately 93x43 mm with UV and IR protection. Switches off automatically. Blackout degree infinitely adjustable from the outside from DIN 9 - 13. Filter switch-on speed: 1/25000 second, from light to dark. Response time filter 0.6 seconds, from dark to light. Fully adjustable bridle with washable sweatband. Works on solar cells and if necessary on AAA batteries, battery life approximately 4000 hours, including AAA batteries. CE approved. Auction-ID: A1-40417-190

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-44803-65

Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-44802-255

Auto-dimming welding helmet with test function, sensitivity and delay time infinitely adjustable Auction-ID: A1-40417-303

Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-44802-243

Special set 93 pieces, 28mm systemincl. tool trolleyMaterial: burnished quality steelScope of delivery see picturesNumber 93 PositionsWeight 320 kgCondition newHole diameter 28 mmDimensions L x W x H 1.0 x 0.6 x 0.85 m Auction-ID: A7-44764-215

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 980 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mmtable load: 1.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1,1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-105 °Tilting Speed: 30 sn min./90°dimensions: 2100x920x1100 mmweight of the machine ca.: 930 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / perforated tableincluding accessory set WMT Basic-Set 2.0The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3)Surface hardness 850 VickersSurfaces that have been ground down and planed smooth.Hole diameter: 28mm, countersunk by 3mm100 x 100mm gridSide panels 200mmHole spacing in the side panels 50mm, diagonal gridHeight adjustable from approx. 830 - 890mmSubstructure reinforced with 140 x 15mm flat steelIncluding base bearings, 110mm diameterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Довжина таблиці: 1200 мм Таблиця ширини: 800 мм Стандартна висота — 980 мм: кг машини приблизно: 0,95 тРобоча станція — діаметр отвору: 28 мм — сітка: 100 x 100 мм — бічні панелі: 150 мм — товщина панелі: 10 мм Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

Кількість: 93 Вага: 320 кг Стан: neu : 28 мм Розміри: 1,0 x 0,6 x 0,85 м Спеціальний комплект із 93 деталей, система 28 мм Включає візок для інструментів Матеріал: Полірована високоякісна сталь Обсяг доставки: див. зображення Дані для цієї реклами створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

Кількість: 102 Вага: 320 кг Стан: neu : 28 мм Розміри: 1,0 x 0,6 x 0,85 м Спеціальний комплект з 102 деталей, система 28 мм Включає візок для інструментів Матеріал: Полірована високоякісна сталь Обсяг доставки: див. зображення Дані для цієї реклами створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

Кількість: 80 Вага: 150 кг Стан: neu : 28 мм Розміри: 0,8 x 0,6 x 05 м Спеціальний комплект з 80 деталей, система 28 мм Матеріал: Відполірована високоякісна сталь Обсяг доставки: див. зображення Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

Кількість: 10 Stk. Діапазон затиску: 25 мм: 28 мм Вага: 10 кг Розміри: 0,3 x 0,3 x 0,2 м10 Швидкознімні затискачі болти — система отворів 28 мм — для товщини столу 25 ммДані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

Set 1 - 33 pieces, 28mm system, consisting of:12x quick-release bolts with twist lock short, without O-rings 4x universal stop 150 L - Nitrided 4x universal stop 225 L - Nitrided 2x stop and clamping angle 175 L - Cast iron 2x stop and clamping angle 300 G left - Nitrided 2x prism Ø60-135° burnished - with collar complete with blade and countersunk head 4x Professional screw clamp - Nitrided 2x Professional screw clamp 45°/90° - Nitrided 1x accessory set consisting of: eccentric, Allen key, brush, whetstone, Probe CleanBasic, Probe non-stick and torch holder. Condition: never used / new (5) Auction-ID: A7-44764-128

Welding helmetProtection level 9 -13 MPower supply 2 x CR2032 Weight 460 gramsDimensions 250 x 270 x 230 mm Condition: never used / new (5) Auction-ID: A7-44764-167

Set 4: 110-piece, 28mm system, consisting of:Clamps: 14 x 280610.NClamps: 10 x 280630.NPrism: 6 x 280648.1.NBolts: 30 x 160511Magnetic bolts 8 x 280740Stroke: 10 x 280410.NStroke: 10 x 280420.NStroke: 4 x 280430.NAngle: 8 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NTrolley: 1 x 280910Accessory set. 1 x 283999Number 106 PositionsWeight 283 kgCondition newHole diameter 28 mm Auction-ID: A7-44764-159

Welding table \"SIGMUND Professional 750 + Plasma Nitrided\" is made of high-quality steel S355J2+N.Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides.Incl. basic foot equipment. Without accessories shown. Table length 2400 mmTable width 1200 mmTable height 850 mmHeight adjustment 50 mmMachine weight approx. 0.99 tDimensions L x W x H 2.4 x 1.2 x 0.9 m Condition: never used / new (5) Auction-ID: A7-44764-32

Siegmund workbenchPerforated plate made of high-quality steel S355J2+N + plasma nitriding- 16 mm hole- Holes in 50x50 mm grid- Material thickness approx. 12 mm- Height adjustable from 800 to 975 mm- Frame made of aluminium profilesTable length 1200 mmTable width 800 mmTable height 800-975 mmTable load 250 KgMachine weight approx. 108 KgDimensions L x W x H 1.2 x 0.8 x 0.85 m Condition: never used / new (5) Auction-ID: A7-44764-236

Workstation- Hole diameter: 28mm- Grid 100 x 100mm- Side walls 150mm- Table thickness 10mmTable length 1200 mmTable width 800 mmTable height 980 mmLoad capacity kgMachine weight approx. 0.95 t Auction-ID: A7-44764-10

Welding table on lift table: Hole diameter: 28mmThe table is made of 15mm thick steel S355The surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mmRibbed underside for reinforcement.Table length 1300 mmTable width 800 mmLoad capacity 1000 kgLifting height 510 - 1550 mmTotal connected load 1.5 kWConnected voltage 230 VMachine weight approx. 0.55 tCondition: never used / new (5) Auction-ID: A7-44764-27

Clamping plate1400 x 1200mmHeight 200mmGroove 38 x 38mmsee pictures Auction-ID: A7-44764-21

Welding turntable with- foot switch- tilt/swivel by hand- speed infinitely adjustable- welding current transmission - hole in face plate 30mm, 20mm deep.- Documentation in English only. Table diameter 330 mmTable load 220 kgSwivel range 135 degreesTilt adjustment: manual/mechanical manual Speed max. 5 rpm infinitely variableTable load 100 kg. verticalTotal power requirement 0.125 kW Condition: never used / new (5) Auction-ID: A7-44764-76

Welding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side bolsters 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.incl. floor bearingaccessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, which allows thetable to be moved with a pallet truck.The accessories shown are optional Table length 2000 mmTable width 1000 mmTable height 850 - 900 mmMachine weight approx. 0.45 t Condition: never used / new (5) Auction-ID: A7-44764-88

MAG welding machine with:Hose package 3mwelding current max. 250A Connection voltage 400 VWeight 170 kgDimensions LxWxH 700 x 450 x 750 mm Condition: untested (6) Auction-ID: A7-44764-211

Basic set 3 / 43 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps12 pcs quick clamping bolts6 pcs universal stop 150mm4 pcs universal stop 225mm2 pcs universal stop 100mm2 pcs stop and clamping angle 175mm2 pcs stop and clamping angle 275mm2 pcs prisms 60mm1 pc eccentric stop 100mm diameter1 pc torch holder1 pc hole brush 30mm2 pcs release lotion 500ml, on natural, biological basis2 pcs. welding table cleaner 500ml, on natural, biological basis Condition: never used / new (5) Auction-ID: A7-44764-168

Container turning deviceincl. foot switch and remote controlLoad capacity 5.0 tWorkpiece diameter 303 x 2438 mmFeed speeds infinitely variable 0 - 1745 mm/minWheel diameter 305 mmWheel width 100 mmTotal power requirement 0.5 kWMachine weight approx. 0.37 tDimensions approx. 1.5 x 1.05 x 0.7 m Condition: never used / new (5) Auction-ID: A7-44764-224

Welding turntable with- foot switch- tilting/swivelling motor- speed infinitely adjustable- 250 Ampere welding current transmission - bore in face plate 40mm.Table diameter 550 mmTable load 500 KgSwivel range 135 degreesTilt adjustment: manual/mechanical motorized Speed max. 5 rpm infinitely variableTable load 50 kg. verticalTotal power requirement 0.8 kWMachine weight approx. 245 KgSpace requirement approx. 820 x 730 x 710 m Condition: never used / new (5) Auction-ID: A7-44764-127