подкатегории
(уровень третий категории)
Производитель:
(Категория: 104)
workpiece diameter: 350 mmworkpiece weight: 99999999 kgworkpiece height: 240 mmControl: total power requirement: 7,5 kWweight of the machine ca.: 2 tdimensions of the machine ca.: mSeltene Gelegenheit:Teilüberholte Hochpräzisions-RundtischflachschleifmaschineMit komplett neuem Schaltschrank und neuer Steuerung mitBEMA SchleifsoftwareRundtisch-Durchmesser 380mmMagnet-Durchmesser 350mmSchleifscheibenabmaße 300x25x76,2mmTischdrehzahl variabel max. 200U/minSchwenkwinkel des Tisches +-3 GradSchleifspindeldrehzahl 800-4200 U/minLeistung Schleifspindelantrieb 5KWVerfahrweg quer max. 225mmVerfahrweg vertikal max. 480mmAbstand zwischen Magnetspannfutterund Spindelmitte, max. 390mmAutomatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifsc ...
grinding diameter: 400 mmgrinding length: 1000 mmcentre height: 200 mmcontrol: Fanuc 0i-F workpiece weight: 100 kgtravel -z axis: 1150 mmmeasuring system resolution capability: 0,0001 mmrapid traverse: 20 m/mintravel -x axis: 365 mmrapid traverse: 20 m/mingrinding wheel size: 500 x 80 mmb-axis indexing accuracy +/-: 1 °spindle motor: 7,5 kWworkpiece turning speeds: 1 - 100 U/mingrinding head swivelling: 240 Gradtail stock: taper in tailstock MT: 4 tailstock quill stroke: 49 mmtotal power requirement: - kWweight of the machine ca.: 4,1 tdimensions of the machine ca.: 3,4 x 2,2 m3-axis cylindrical grinding machine equipped with:- CNC control Fanuc 0iF- B-axis- Coolant belt filter system- Tail stock- UR grinding head for internal, external and surface grindingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Процесс: бесцентровое врезное шлифование, макс. диаметр заготовки: 20 мм, макс. длина заготовки: 80 мм, без автоматизации с помощью вибрационной чаши. Возможен осмотр на месте.
grinding diameter: 360 mmgrinding length: 1000 mmcentre height: 180 mmmax. workpiece weight between centres: 250 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine mit sehr wenigen Betriebsstunden nach Überholungbeim Karstens Fachbetrieb.Zustellsteuerung JetterDigitalanzeigeInnenschleifvorrichtungReitstock mit ZylindrizitätsfeinverstellungHydraulische ReitstockpinoleEtc...Luftkissenschnellverstellung SchleifspindelstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 250,350,450 mmgrinding length: 1500 mmcentre height: 125,175,225 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ± 6 °longitudinal feed of the table: 1750 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 80 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 5,6 x 2,0 mOverhauled with geometric KELLENBERGER protocoll.Pictures of a similar 1000mm machine.Standard with:-New electric cabinet-New motor for the workpiecespindlehead-2-axis DROFotos of a delivered (1000U) machine with following optiones against extra charge:-protection doors-tails ...
max. workpiece diameter: 1000 mmmin. workpiece diameter-at internal hobbing: 100-500 mmworkpiece length - max.: 500 mmcontrol: Siemens Sinumerik 840 D swing dia.: 1250 mmWorkpiece spindle flange diameter: 520 mmwork piece spindle speed range: 0-440 U/minweight of the machine ca.: 25 tdimensions of the machine ca.: 5100 x 3034 x 4500 mmTable travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mmTable speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axisEquipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentationThe data fo ...
Sunnen 1804 Хонинговальный станок, ручной под напряжением Станок можно увидеть работающим на нашем складе в Гуссаго BS. Возможен тестовый прогон станков Mimu, диаметр хонингования (мин-макс): 1,5-120, длина хонингования (макс.): 250
X-ход 420 мм YВег 270 мм Размер стола 254 x 482 мм Проекция 254 / 318 мм Скорость шлифовального шпинделя 12 - 60 000 об/мин Ход шпинделя 92 мм Частота вращения шпинделя 90, 136, 184, 280 об/мин Скорость хода, регулируемая 2 - 120 ходов при 51 мм Точность 1,25 мкм при 30 мм Подключение сжатого воздуха 7 бар Вес машины ок. 1700 кг Размеры ок. 1,45 x 1,2 x 2,4 м
длина шлифования: 500 ммширина шлифования: 200 ммвысота заготовки: 300 ммобщая потребляемая мощность: 3 кКВес станка ок.: 1,6 тРазмеры станка ок.: 2,621,7 мПакет 5 x JUNG HF 50 EXW под ФранкфуртомДанные для этого объявления были созданы с помощью ModulMWS - программного решения LogoTech oHG.
внутренний диаметр: 150 ммглубина шлифования: 200 ммход стола: 425 ммдиаметр: 80 ммскорость вращенияшпинделя: 17000 У/минСкорость поворота заготовки: 125/176/246/350 У/минмакс. диаметр поворота: 250 / 420 ммОбщая потребляемая мощность: 2,2 / 0,5 / 0,9 кВтВес машины ок.: 2 габарита машины ок.: 2,40 x 1,20 x 1,45 мДанные для этого объявления были созданы с помощью ModulMWS - программного решения компании LogoTech oHG.
width of the strips: 150 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4.0 kW 100% EDweight: 84.0 kgrange L-W-H: 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt K 80- Hinged protec ...
width of the strips: 75.0 mmband length: 2000 mmband speed: 30.0 m/sekgrinding width: 500 Plantisch mmsuction capacity: 630 m³/htotal power requirement: 3.75 kWweight of the machine ca.: 90.0 kgrange L-W-H: 1100 x 550 x 1035 mmFurnishing :- High quality construction- The drive roller is crowned- This automatically centers the sanding belt in the middle of the roll- Fully vulcanized contact roller for the longest service life and the best possible smoothness- Tool-free and therefore faster, uncomplicated change of the sanding belt- Stepless height adjustment- for optimal adjustment of the belt sander to the user- Freely adjustable metal stop- for the optimal and safe guidance of workpieces Use of the large surface grinding area- Belt speed structurally optimized- thus a burning of the workpiece during processing can be largely excluded- Extraction equipped with robust and flexible suc ...
width of the strips: 150 mmband length: 2000 mmband speed: 1400 / 2800 U/mintube diameter: 40 - 140 mmvoltage: 380 Vtotal power requirement: 3.0 kWweight of the machine ca.: 360 kg. Exhibition machine - like NEW not yet in use () New price approx. 6.500 euros Special price on request- Machine video - identical machine -https://www.youtube.com/watch?v=LXP09NFTnlw&t=1sThe FALKEN PN 38/140 is a multifunctionalgrinding machine for grinding pipe and profile endsEquipment:- robust electro-motor pipe profile grinding machine- enables notches up to an angle of 50°- large-dimensioned surface grinding surface with protective cover- 2x belt speeds- control panel, front left - including emergency stop button- grinding belt can be replaced quickly and easily- vice movement to the right - left, forwards & backwards possible- side grinding dust collection container- horizontal & vertical grinding alig ...
tube diameter: 16.0 - 90.0 mmwidth of the strips: 100 mmband length: 1250 mmgrinding band dimension: 100 x 1250 mmtotal power requirement: 2.2 kWweight of the machine ca.: 180 kg.range L-W-H: 1200 x 600 x 1150 mmThe TUGRA TT 90 is a grinding machine forgrinding pipe and profile ends on the front.Equipment:- electro-motor grinding machine for pipe and profile ends- 10x grinding rollers included in delivery incl. storage area - rear of the machine- easy manual clamping/opening of the material- lateral adjustment of the material clamping system- grinding up to 50° degrees possible- machine base- collecting tray for easy emptying of grinding dust- EMERGENCY OFF button at the front- front privacy screen made of plexiglass- side transport bags for easy transportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2000 mmband speed: 14.5 + 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 90.0 kgrange L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEELThe free-standing belt sander PÁSOVEC 150 is a 2-speed machine forefficient and at the same time economical sanding of surfaces, edges andRounding of parts made of carbon and stainless steel, aluminum and other non-ferrous metals such as wood and plastic. The machine has a totaltwo workstations for contact and face grinding. The height of the grinding armcan be adjusted to the operators body proportions. The machinehas an integrated preparation for the suction connection ex works. TheChanging the sanding belt is just one thing thanks ...
width of the strips: 75.0 mmband length: 2000 mmband speed: 14.5 + 29.0 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 72.0 kgrange L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEELThe free-standing belt sander PÁSOVEC 75 is a 2-speed machine forefficient and at the same time economical sanding of surfaces, edges andRounding of parts made of carbon and stainless steel, aluminum and other non-ferrous metals such as wood and plastic. The machine has a totaltwo workstations for contact and face grinding. The height of the grinding armcan be adjusted to the operators body proportions. The machinehas an integrated preparation for the suction connection ex works. TheChanging the sanding belt is just one thing thanks ...
width of the strips: 150 mmband length: 2000 mmband speed: 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4.0 kW 100% EDweight of the machine ca.: 84.0 kgrange L-W-H: 1080 x 520 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table- ...
width of the strips: 75.0 mmband length: 2000 mmband speed: 29.0 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 66.0 kgrange L-W-H: 1080 x 440 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table- ...
width of the strips: 150 mmband length: 2000 mmrevolutions per minute: 3000 U/minengine output: 4.0 kWweight: 93.0 kg including machine baseHigh-performance grinder for standard grindingapplications for extra wide workpieces.Furnishing:- High-performance belt sander with a stable machine base- Constant speed with high cutting performance thanks to the robust 4 kW motor- Very good price-performance ratio- Removable chip catcher- Patented strap tensioning system- Low vibration due to robust construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 2000 mmband speed: 15 + 30 m/seltube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 GradDust suction hood: 2 x 75.0 mmmotor speeds:: 1420 / 2660 Upm.face grinding attachment: 400 x 100 mmtotal power requirement: 2.5 / 3.3 kWweight of the machine ca.: 148 kg.range L-W-H: 750 x 1400 x 1200 mmFurnishing :- Constant belt tension through spring-loaded tensioning device- Standard with cylindrical grinding device- for grinding diameters of diam. 20-76 mm- Quick and easy setting of the desired grinding angle- Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt- Large plan grinding surface with protective cover- Slow belt speed (15 m / sec.)- ideal for grinding stainless steel and aluminum- User-friendly tape change, quick and uncomplicated- Quick and easy changing of the grinding rollers without tool ...
width of the strips: 75.0 mmband length: 2000 mmband speed: 343.0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 3.0 kWweight of the machine ca.: 100 kgrange L-W-H: 500 x 1010 x 1000 mmDescription:The belt sander models TAS 75 and 150 are powerfulQuality machines, built according to the strictest environmental andSafety regulations. The belt sanders are standardwith motor brake, adjustable working height, eye protection,Angle stop and motor protection switch with zero voltage releasebuilt. The low-noise machine with CE mark is suitableideal for grinding all metals.Furnishing:- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful engine 3.6 kW- suction nozzle including: integrated suction The data for this ad was created with ModulM ...
width of the strips: 45.0 mmband length: 850 mmband speed: 8.0 m/sek.voltage: 230 Vtotal power requirement: 0.18 kW MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
wheel diameter: 250 mmgrinding wheel size: 250 x 25 x 20 mmturning speeds: 2850 U/minvoltage: 400 Vtotal power requirement: 2.0 kWweight of the machine ca.: 23.0 kg.dimensions of the machine ca.: 600 x 290 x 300 mmFurnishing:- Heavy design and high quality equipment- ideal for professional use- Ideal for matting, polishing- up to mirror-smooth surfaces of various materials- with the help of optionally available polishing discs and polishing pastes- Lockable ON-OFF switch according to IP54 with undervoltage release- Including motor with copper winding for a long service life- Standard with rubber feet for vibration-free work- Very smooth running thanks to balanced rotor with quality ball bearings- Elegant machine body made from high quality die-cast- Suitable for polishing metal, plastic and non-ferrous materialsScope of delivery:- Soft polishing pad- Hard polishing pad- Operating instruc ...
grinding width: 32.0 mmmax. dia. of grinding wheel: 250 mmgrinding wheel size: 250 x 32 x 32 mmturning speeds: 2850 U/minGrain size: K 36 / K 80 engine output: 1.5 kWvoltage: 400 Vweight: 30.0 kgrange L-W-H: 510 x 320 x 360 mmscope of delivery : - Grinding disc K 36- Finishing wheel K 80- Spark protection on both sides- workpiece supportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75.0 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 67.0 kgrange L-W-H: 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt ...
width of the strips: 150 mmband length: 2000 mmband speed: 34,0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 4.0 kWweight of the machine ca.: 115 kgFurnishing :- integrated suction- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful motor 4.0 kW- suction nozzle including: integrated suction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75.0 mmband length: 2000 mmband speed: 30.0 m/secgrinding width: 75 x 430 mmengine output: 3.0 kWweight: 75.0 kg including machine baseFurnishing:- Powerful belt sander- modularly expandable, for the trade and for small series.- Can be expanded with additional modules- Speeds ideal for metalworking with 3000 / min- Height-adjustable surface grinding table for linear surface grinding- Removable chip catcher- Connection option for external suction- Working height individually adjustable- Patented strap tensioning system- Robust three-phase motor- Low vibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 400 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 220 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 200 mmband length: 1490 mmband speed: 8.0 m/secmotor: 400 Voltloading area: 500 x 280 mmtotal power requirement: 1.5 kWDimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
