подкатегории
(уровень третий категории)
Производитель:
(Категория: 109)
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chucks, soft-Jaw width: 27 mm-Dimensions: see photo technical. drawing-Total dimensions: 95/80/H125 mm-Total weight: 5.6 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 380 mm -4 jaw chuck -threaded mount -Weight: 40 kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine-Dovetail: 70 by 98 mm-Bore: Ø 45 mm-Dimensions: 155/90/H150 mm-Weight: 6.3 kg
Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -Interchangeable jaws -Cone: 69 mm -Thread: M 95 x 4.5 mm -Weight: 26 kg
Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe M4L -Max. passage: Ø 500 mm -Peak height: 390 mm -Technical drawing: see photos -Dimensions: 840/140/H850 mm -Weight: 98 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Hole circle: Ø 230 mm -Weight: 23 kg
fixed center, fixed punch center, fixed Morse taper, fixed centering center, centering centers -Fixed centering tip: 3 pieces -Mounting: Met. cone 80 mm see photos -Shipping/Price: complete -Transport dimensions: 400/250/H80 mm -Total weight: 33.5 kg
Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 50 mm -Recording: SK50 -Shaft: R=25,000 / L=120,068 mm -Dimensions total: Ø 98 x 255 mm -Weight: 4.4 kg
Alpha iBZ / iCZ sensors for spindle (motor sensor), unused; 1x TYPE A860-2120-V007, 2x iCZ A860-2140-V003-On ring (inner diameter 210mm), (e.g. for milling head NT4250 / 4300)
Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact
Box size 500x325x350mm; rated input current A MIG; 35/MMA; 38/TIG28; Rated input capacitance KVA MIG; 8.05/MMA; 8.74/TIG; 6,44;
Profile Rolling / Crimping Machine manufactured in 2006. This SCHÃCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÃCO ISOMAT 4 machine we have for sale. Contact us for further details.
Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 300 x 180 mm -Quantity: 1x angle stop available -Dimensions: 305/180/H20 mm -Weight: 0.6 kg
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 240 mm -without: interchangeable jaws -Conical mounting type: Ø 102 mm -Weight: 29 kg
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck-DH: 200x3-III-TGL: 30-2332-Chuck size: Ø 200 mm-Weight: 16.7 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chuck, soft-Jaw width: 20 mm-Dimensions: see photo technical drawing-Total dimensions: 65/60/H50 mm-Total weight: 1.2 kg
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 500 mm -Length: 800 mm -Working height: 140 mm -with: support ribs -Plate thickness: 30 mm -Number: 1x plates available -Price: per piece -Weight: 108 kg
Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Passage: Ø 80 mm -Short taper: 6 -Remark: without further jaws -Weight: 26.1 kg
Three-jaw chuck key, three-jaw lathe chuck-square size: 17 mm-Sleeve: Ø 38 mm-Number: 2x available-Price: per piece-Weight: 2 kg/piece
Clamping angle for workpiece clamping-Dimensions: W/H/L 250/775/245 mm-Thickness: 27 mm-Surface: milled-Thread holes: M16-Number: 2x mounting brackets available-Price: per piece-Weight: 98.5 kg/piece
Tongue and groove system, suitable for use as a floor, can also be used as ceiling or wall paneling, pine parquet floor, floor contains open knots and cracks this is floor own, floor contains open cracks, untreated, thickness 21 mm, 89 packs a 1.12 m2
Filter length [mm] 1500 Filter diameter [mm] 500 Connection diameter [mm] 210 Mobile 2 collection bags
Segment bending machine>br>Segment widths:>br>25, 30, 35, 40, 45, 50, 75, 100, 150, 250mm.>br>>br>Sheet width 1270 mm>br>Sheet thickness 2.0 mm>br>Column width 1050 mm>br>Opening width 48 mm>br>Bending angle max. 135 °>br>>br> >br>Condition: never used / new (5)
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chuck, soft-Jaw width: 18 mm-Dimensions: see photo technical drawing-Total dimensions: 65/55/H45 mm-Total weight: 0,8 kg
