подкатегории
(уровень третий категории)
Производитель:
(Категория: 109)
Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutters: indexable insert end mills with internal cooling, 8 pieces -Receptacle: Ø 32 mm -Diameter: 32 to 43 mm, see photos / parts list -Levy/Price: complete -Transport dimensions: 400/200/H60 mm -Weight: 8.7kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chuck, soft-Jaw width: 18 mm-Dimensions: see photo technical drawing-Total dimensions: 55/55/H35 mm-Total weight: 0,4 kg
Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available Price: per piece -Dimensions: 220/95/H95 mm -Weight: 4.5 kg/piece
Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 200 x 55 mm -Clamping depth: 200 mm -Dimensions: 510/228/H190 mm -Weight: 64 kg
Bezel, moving bezel, bezel, setting stick, lynette -Max. passage: Ø 80 mm -Edition: Brass -Hole spacing: 210 mm -Peak height: 135 mm -Weight: 8 kg
End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 14 mm -Usable length: 30 mm -Corner radius: 0.7 mm -Carbide: equipped -Quantity: 88 pieces Price: per piece -Weight: 8 kg
Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575
Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)
Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements-Leveling elements: 2 pieces, for machine tools and systems-Spring element: Ø 160 mm-Price/tax: complete-Dimension: 220/160/H51 mm-Weight: 4kg/piece
This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us.
moving point, moving center point, moving Morse taper, moving-barrel tip: shaft-mounted-Recording: MK5-Dimensions: Ø 70/240 mm-Weight: 3 kg
Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder,-Manufacturer: WMW Smalcalda, milling chuck SK40 5 pieces-Type: SK 40/B12 40908 3 pieces-Type: SK 40/B18 41076 2 pieces-Versions: see photos-Price/Delivery: complete-Transport dimensions: 340/180/H70 mm-Total weight: 6.6 kg
Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Clamping surface: 3000 x 2000 mm -Quantity: 3 mounting plates available Price: per piece -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) -Sheet thickness: 60 mm -Plate: with supporting ribs -Dimensions each: 3000/2000/H360 mm -Weight: 4500 kg/unit
Face plate, face plate chuck, four-jaw chuck-Transfer in current condition as seen-Jaws and threaded rods: missing-Chuck size: Ø 355 mm-Weight: 15 kg
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate-Outer: Ø 207 mm-Short taper: 6-Number: 1x discs available-Price: per piece-Weight: 6.8 kg
For insert SOGX/ including diameters 25.5 - 18 and 29 mm/3 x D/ unused and in original packaging
This 4-axis SCHÃCO Profilbearbeitungscenter was manufactured in 2001. It features a travel range of 6,300 x 600 x 405 mm, continuous 180° A-axis rotation, and a high-speed capability of 24,000 rpm. Equipped with an HSK-40E tool holder and an 8+1 tool magazine, it ensures efficient machining. Consider the opportunity to buy this SCHÃCO Profilbearbeitungscenter. Contact us for more information about this machine.
Torque wrench, torque tool-Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 80-400 Nm-Art.No.: 4440-01-Torque: 80 - 400 Nm / 60 - 300 lbf-ft-Holder: pin holder Ø 16 mm-Transport dimensions: 755/70/H65 mm-Weight: 2.1 kg
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set-Top jaws: Jaw set for three-jaw lathe chucks, hard-Jaw width: 36 mm-Dimensions: see photo techn. drawing-Total dimensions: 140/110/H85 mm-Total weight: 6.3 kg
Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing-Pipe sealing cushions-Outer diameter: 168 mm-Height: 20 mm-Delivery of: steel/stainless steel cover plates possible-Number: 2x pillows available-Price: per piece-Minimum purchase: complete-Weight: 0.5 kg/piece
