прочие металлообрабатывающие станки подержанные на продажу (11,971)

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -Tool holder: 27 mm -Number: 9 recordings -Price: per piece -Dimensions: 73/67/H197 mm -Weight: 4.7 kg

Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min

Combined sheet metal processing machine with:>br> bending, tool widths 25 - 50 - 75 - 150 - 200 - 250 - 300 mm.>br> rolls, roll diameter 42mm>br>- shears, max. 1015 x 1mm>br>>br>material width 1015 mm>br>material thickness 1 mm>br>speed by hand >br>weight 0.25 t>br>Dimensions L x W x H 1.4 x 0.6 x 0.75 m>br> >br>Condition: never used / new (5)

Magnetic chuck, permanent magnetic round chuck, magnetic clamp, magnetic chuck-Magnetic chuck: Permanent magnetic round chuck chuck size Ø 305 mm-Hole circle: Ø 170 mm-Receptacle: short cone 8 / cone 135 - 139 mm-Weight: 54 kg

Special set 31-piece, 28mm system, consisting of:1x tool trolley10x staking pin 10x ball lock pin3x Professional screw clamp, 300 x 150mm 3x Professional screw clamp, 300 x 200mm 2x Professional pipe screw clamp 180°2x Professional pipe screw clamp 45°Material: burnished quality steelATTENTION Tool is designed for 25mm table top thickness. Number 96 PositionsWeight 600 kgCondition newHole diameter 28 mm

Stop square, locksmith square, control square -Angle stop: Leg length 355 x 250 mm -Quantity: 3x angle brackets available -Price: per piece -Dimensions: 400/250/H25 mm -Weight: 2.7 kg/pc.

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block-Marking prism: for marking plate, clamping plate, straightening bench ...-Dimensions: 170/90/H200 mm-Weight: 10.2 kg

multi-function punch, punch, hole punch, pneumatic hole punch -Article number: 296 346 -Dimensions: 800/400/H1200 mm -Weight: 170 kg

Quick-release clamp, quick-release chuck, drilling jig, machine vice, drill press vice -Clamping surface: 65 x 35 mm -Clamping height: max. 40 mm Price: per piece -Quantity: 2 available -Dimensions: 120/80/H70 mm -Weight: 1.5 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange with drive pin -Outer diameter: 230 mm -Mount: Thread M165 x 3 -Mounting cone: Ø 90 to 110 mm, groove 70 x 16 mm -Dimensions: Ø230 x 160 mm -Weight: 9.4 kg

weight of the machine ca.:11,2 tone spindle

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set-Top jaws: Rotary jaw set for four-jaw chuck, hard-Jaw width: 20 mm-Dimensions: see photo techn. drawing-Total dimensions: 65/80/H45 mm-Total weight: 1.2 kg

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing-Pipe sealing cushions-Outside/Inside: Ø 125/60.3 mm-Height: 58 mm-Number: 12x pillows available-Price: per piece-Weight: 1.3 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chuck, soft-Jaw width: 20 mm-Dimensions: see photo technical drawing-Total dimensions: 60/60/H55 mm-Total weight: 1.2 kg

Quick change tool post, tool post head, quick change tool post - Shooting dimensions: 90 mm -4x different versions: of steel holders available (pictures on request) -Price per piece -Length: 120mm

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Drill chucks: Surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Weight: 24 kg

Clamping plate, plate field, grooved plate-Clamping plate: grooved plate-Length: 310mm-Width: 310mm-Plate height: 65 mm-Weight: 44 kg

4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Clamping force: max. 90 kN -Equipment: Short cone 6 (106 mm) -Mouth size: Ø 210 mm -Weight: 22 kg