Производитель:
(Категория: 107)
Bending tool, die, upper knife, upper tool, straight tool-Tool: split, for press brake-Tool angle: 90°-Drawing: in the photos-Dimension: 33 x 170 mm-Length: 1485 mm (1 x 855/630 mm each)-Weight: 44.6 kg
Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press -Stamp holder: with slotted punch tool, without die -Socket: Ø 51 mm / Bolt circle Ø 110x18 mm see photos -Punch tool: Slotted hole 22.5x50 -Dimensions: Ø 135 x 180 mm -Weight: 6.7 kg
Bending tool, die, lower knife, lower tool, prism tool-Tool for: press brake-Prisms: R14.5 mm-Square: 101 x 71 mm-Total length: 552 mm-Weight: 26 kg
material width:500 mmcoil weight:2 x 2,0 tmaterial thickness:1,0 - 6,0 mmcoil internal diameter:350 - 420 mmcoil external diameter:1600 mmno. of straightening rolls:9 straightening roll diameter:50 mmnumber of draw-in rolls:2 speed:0 - 40 m/minmaterial thickness at 500 mm material width:3,5 mmpower requirement:17,5 kWDimensions (WxDxH):2,3 x 4,2 x 2,4 mstraightening machine:RM 5050.4/9 double decoiler:AH 2000/2/M snubber roll:pneumatic interchangeable jaws:130 mm expansion of the inner diameter
beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp-Manufacturer: Siegert, Sheet metal clamp: Lifting clamp type SGK-Grip width: 1-75 mm-Load capacity: 2500 kg-Dimensions: 300/150/H390 mm-Weight: 17 kg
Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Workshop trolley: stable tool trolley -4 drawers: lockable, see photos for layout -Contents: 25 tool carriers HSK A63/B80 -Total dimensions: 885/555/H995 mm -Weight: 101kg
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, length 2020 mm -Tool angle: radius 5 mm -Dimensions: see drawing in the photos -Dimensions: 2020/27/H95 mm -Weight: 23.4 kg
: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 €: 284.16 €: 1 : 2500 kg: 1300 mm: 450 mm: 550 mm: 600 mm: 80 mm: 1600 mm: 1550 mm: 2000 mm: 580 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlPneumatic downholderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool square Ø 70 mm-Type: Mubea 70 2 holder Ø 50 mm-Die: Ø 150 mm-Total dimensions: Ø 150 x 120 mm-Weight: 5,9 kg
Hand lever shears, long knife, sheet metal and round steel shears, lever shears-Mubea: sheet metal and round steel shears-Cutting insert length: 200 mm-Dimensions: 380/160/H1240 mm-Weight: 22 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch-Shearing tool for channel steel: 50 mm-Type: 440065124502-Type: 440065124501-1x dimensions: 136/130/H25 mm-1x dimensions: 128/132/H25 mm-Weight: 6 kg
Long-blade sheet metal and round steel shears -Sheet metal shears: sturdy -Material: Flat steel -Round: up to 15 mm -Square: up to 15 mm
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 15 mm -Load capacity: 1000 kg -Number: 1x terminal available -Price: per piece -Weight: 5 kg
: neu : ca. 8 Wochen ab Auftragse : Spanien : 49600 €: 947.36 €: 130 to: 600 mm: 5 : 2 : 50x18 mm: 80 mm: 600x18 (max. 600x20 mit D mm: 120x120x11 (max. 150x150x mm: 45/40 mm: 130x12 mm: 250x12 mm: 15 kWhydraulic drive2 foot pedals for independant working on punching and section stationbending unit with 2 dies, V50 and V90flat steel stationWITH DEVICE FOR REDUCING DEFORMATIONangle iron station with round and square bar cuttingtriangular notching station with table and gaugepunching station with table and gaugegauge 1000 mm with contact switch, for angle / flat steel stationoperating manual in German and EnglischThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
beading machine, hand beading machine, flanging machine, seam closing machine, manual beading machine -max. sheet capacity: 1.0 mm -Projection: 200 mm -Tool holder: Ø 24 mm -Stop plate: adjustable -Dimensions: 750/700/H1500 mm -Weight: 120 kg
Bending tool, die, upper knife, upper tool, straight tool-Tool for: press brake-Tool as: die-Thickness: 25/13 mm-Drawing: with the pictures-Total length: 400 mm-Total height: 99 mm-Price: per piece-Number: 2 pieces-Weight: 9.7 kg
