Производитель:
(Категория: 307)
Key data: 560 , 1500
Антифрикционный подшипник Двигатель: 132 кВт Моторизованная регулировка зазор
screw ø:: 90 mmscrew length:: 20D screw speedl:: 0 - 60 U/minCondition: NEW,Specification: Rubber vacuum extruder - with warranty- Screw diameter: 90 mm- Screw length: L = 20 D (approx. 1,800 mm conveying length)- Screw speed: 0 - 60 rpm- Centre height of extruder: approx. 1,125 mm incl. base frame- Max. permissible injection pressure: 500 bar- with feed roller- Extruder water-tempered- Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump- Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm- Vacuum cylinder: three tempering zones BL = 1,057 mm- End cylinder: one temperature control zone ...
machine measurements: -- mmmachine weight: -- kgpower capacity: -- kWCondition: used, Specification: drum-type blast deburring machine type: MEWO Rotor TS 60- batch volume approx.: 1-600 litres,- working temperature: - 150°C- drum speed: 5 - 30 rpm- Blast wheel speed: 1,000 - 9,500 rpm- Control: Siemens S7 SimaticThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 700 mmcross-section heigth:: 500 mmfeed:: -- mmCondition: used, overhauledSpecification: splitter for rubber bales - overhauled with CE- cross section width max.ca.: 700 mm- cross section height max. approx.: 500 mm- cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz- Infeed roller conveyor for product transport- Machine stands on a raised pedestal- Two-hand safety control for driving the blade movement- Safety guard according to current standards- New control cabinet- New on-board system machine- Operating and maintenance manual in English- CE marking- Paintwork: according to customer requirements- Refurbished with 1 year warranty- CE marking,Option:- Output roller conveyor newThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine measurements: 850 x 1.800 x 1.450 mmmachine weight: 360 kgpower capacity: 0,7 kWCondition: newSpecification: Powder coating machine, type: EPC-30/2EThe machine is designed for the powder coating of cables, hosesand profiles.- Product diameter max.: 30 mm- Product speed max.: 1,500 m/min- Powder throughput min.: 30 g/min with fine dosage- Powder throughput max.: 400 g/min per powder injector- Electrostatic: available as option- Connected load: 0.7 kW- Dimensions LxHxW: 850 x 1,800 x 1,450 mm- Weight approx.: 360 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 100 mmcross-section heigth:: 40 mmfeed:: 2 - 999.999,9 mmCondition: new,Specification: Impact knife cutting machine CC-600/40 for hoses and profiles- contact length: 600 mm- product diameter: 40 mm- belt width: 100 mm- Tractive force: 400 N to 800 N- Drive: 2 drives upper and lower belt- Conveyor belt speed: 100 m/min- Drive feed, cutting motor: Servo drives- Cutting capacity with blade max.: 4,000 1/min- Connected load: 3.5 kW- Dimensions L/H/B: 1,900 x 1,650 x 960 mm- Weight approx.: 580 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mmroll length: 1000 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 45 kWCondition: used, overhauledSpecification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rolls- roll diameter: 400 mm- roll length: 1000 mm- rolls: with core bore, with central chamber for water cooling- Rollers mounted on bronze bushes with oil circulation lubrication via pump,- equipped with new slewing rings for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit NEW- Tiltable guide plates- stainless steel roller container to hold the mixture- bi-directional rods- safety brake for NOT stop- AC motor: 45 kW - 400 Volt - 50 Hz- Painting: in RAL colours according to customer ...
roll diameter: 560 mmroll length: 1500 mmrolls drilled: Peripher Nip adjustment: hyraulisch 0total power requirement: 150 kWCondition: used, completely overhauled, with warrantySpecification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine- roll diameter: 560 mm- roll length: 1500 mm- model: Duplocom / pluridrive- Peripherally drilled rollers for water cooling- Cardan joints between gearbox and rollers- Individual drive for the rollers, for variable friction- hydr. gap adjustment- Hydraulic unit- Tilting steel guide plates- rollers mounted on roller bearings with appropriate lubrication- rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit- One gearbox- two individual drives, each with: 2x 75 kW - 400 V - 50 ...
roll diameter: 550 mmroll length: 1500 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine measurements: 1500 x 2400 x 1150 mmmachine weight: -- kgpower capacity: 12 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 200 °CTorque: - 0Dimensions (HxWxD): 680 x 1320 x 760 mmweight: 177 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 700 mmroll length: 2200 mmrolls drilled: Kernbohrung Nip adjustment: hyraulisch 0total power requirement: 160 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw ø:: 120 mmscrew length:: 17D screw speedl:: 42 U/mindrive power:: 138 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
диаметр рулона: 250 мм длина рулона: 500 ммтюрель сверленный: Kernbohrung регулировка: механищ мощность привода: кВ
machine measurements: 3.000 mmmachine weight: -- kgpower capacity: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 350 mmroll length: 700 mmrolls drilled: peripher Nip adjustment: hydraulisch 0total power requirement: 2x 15 kWCondition: new, with CE mark,Specification: Two Roll Mill 350 x 700 mm - new- cylinder diameter: 350 mm- cylinder length: 700 mm- cylinder boring: peripherally drilled- cylinder bearings: with grease lubrication- 2 cylindera chromed- nip admustment: hydraulically- new hydraulic unit- tipper guiding plates of nylon-polyethylen-material- stainless steel tray- bi-directional bars- AC brake motors: 2 pcs, each 15 kW, 400 V, 50 Hz- bevel gearboxes of transmission: 2 pcs- painting: with RAL colours acc. to customer’s specification- complete machine protection with stainless steel carters- new electric cabinet- new electrical system- new machine on-board system- new control panel Touchpanel 7- PLC system: 1 piece, brand S ...
chamber volume: 80 literuseable volume: -- literfriction: -- motor drive power: 390 kWCondition: used - overhauled - with warrantySpecification: Internal mixer used- Capacity: about 80 lts- Rotors model: tangential type with 3 wings- Command gearbox: semi-unidrive type- Max speed rotors: about 60 rpm- Closing system: drop-door type- Hydraulic unit for drop-door system- Pneumatic hopper for loading material- DC engine: 390 kW - 1500 rpm - 440 V- New electric cabinet with driving system for variable speed of rotors- N.1 new electric panel- New on board electric system on the machine- Safety devices in according to standard rules- Manual of use and maintenance in English language and CE marking- Reconditioned and guaranteed machine in according to standard rules- Warranty: 1 yearThe data for this ad was created with ModulMWS - the software solution ...
cross-section width:: -- mmcross-section heigth:: -- mmfeed:: -- mmspeed of feed:: 0,4 - 20 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 85 mmcross-section heigth:: 25 - 40 mmfeed:: 1 - 999,999,9 mmspeed of feed:: 60 m/mincuts max.:: 100 - 120 Schnitte/mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw ø:: für Extruder 90 mmscrew length:: -- screw speedl:: -- U/mindrive power:: 13,6 kWCondition: little used, as good as newSpecification: gear pump ZP 75/50 for extruder size 90- SEW helical gear units: R 97- Siemens direct current motor: 1 GG5 118- Drive power: 13.6 kW, 57 A- curved tooth coupling- With clamp for the head connection,- Clamping flange for extruder and head connection,- Base plate with linear guide rails,- Tooth shaft diameter: 75 mm- tooth width: 50 mm- helical gearing, hardened steel bearings, right-hand drive- without controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mmroll length: 1100 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 30 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 5 Schläuche 3-5 mmcross-section heigth:: 3 - 20 mmfeed:: 1,5 - 50 mmCondition: used, very good condition only approx. 1 year in productionSpecification: circular knife cutting machine for slices and rings- small cutting machine with high-speed rotating circular knife- feed and knife movement, pneumatic- Tube or strand diameter min.: 3 mm- Tube or strand diameter min.: 20 mm- Feed (ring or strand length): 1.5 - 50 mm- Output depending on material max.: 60 strokes/min- Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm- Power requir ...
clamping force: 450 kNinjection volume: 135 cm³screw diameter: 35 mmplaten size: 600 x 400 mmCondition: used,Specification: C-frame injection moulding machine for TPE - usedclamping unit:- clamping force: 450 kN- heating platen size: 600 x 400 mm- sliding table: yes- Clamping direction: from below- Ejector / lifter: Up + LoInjection unit:- Injection volume max.: 135 cm³- Screw diameter: 35 mm- Connected load: 3x 400 V, 50 Hz- Weight approx.: 5,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press force max.:: 1.000 kNheating plates:: 500 x 500 mmelectrically heated:: °Cheating power:: kWpiston stroke:: ca. 500 mmno. of stages:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 200 °CTorque: - 0Dimensions (HxWxD): 680 x 1320 x 760 mmweight: 177 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll surface width: 450 mmroll diam. toproll: 203 mmroll diam. bottom roll: 203 mmoutput: 8,8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mmroll length: 1000 mmrolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 30 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Фаррел Твин Винт / Rollerdie Экструдер в комплекте с мотором и инвертором Описание прилагается!
доступный Триплекс Экструдер Troester Топ-машина ЗСМ 90x 16D Средняя машина 200W x 6D Под машиной ЗСМ 150 x 16D Головная MW500 Описание прилагается!
Key data: 70
Одновинтовый резиновый экструдер с кормовым роликом и дегазации в винтах 70 мм и длиной процесса 22.D - с двухступенчатой температурой контролируемых entagling винт - Дегазации цилиндра с устройством для статической и/или вакуумной дегазации материала - вакуумный блок насоса - два блока контроля температуры воды с мощностью нагрева 9 кВт каждый, - машина Siemens SPS S7 с панелью управления Siemens KTP1200 HMI - непосредственно приводом корма ролик фидер для резиновых сырых полос, воронка материала ужесточ ...
