Производитель:
(Категория: 307)
Укажите код 1131 в запросе Более подробная информация на нашей веб-странице G3 Mixing Technologies - G3 STOCK или LinkedIn G3 STOCK Подержанная машина, возможность покупки "как есть" без гарантии, или полностью восстановленной и гарантированной как новая машина.
Укажите код 1130 в своем запросе Более подробная информация на нашей веб-странице G3 Mixing Technologies - G3 STOCK или LinkedIn G3 STOCK Подержанная машина, возможность покупки "как есть" без гарантии, или полностью восстановленной и гарантированной как новая машина.
Укажите код 1128 в своем запросе Более подробная информация на нашей веб-странице G3 Mixing Technologies - G3 STOCK или LinkedIn G3 STOCK Подержанная машина, возможность покупки "как есть" без гарантии, или полностью восстановленной и гарантированной как новая машина.
Укажите код 1126 в своем запросе Более подробная информация на нашей веб-странице G3 Mixing Technologies - G3 STOCK или LinkedIn G3 STOCK Подержанная машина, возможность покупки "как есть" без гарантии, или полностью восстановленной и гарантированной как новая машина.
Укажите код 1125 в своем запросе Более подробная информация на нашей веб-странице G3 Mixing Technologies - G3 STOCK или LinkedIn G3 STOCK Подержанная машина, возможность покупки "как есть" без гарантии, или полностью восстановленной и гарантированной как новая машина.
В наличии есть полная установка с оборудованием для производства Airspring! 3-валковый каландр с линией и 84-дюймовой двойной мельницей Косой резак Несколько строительных машин несколько гидравлических вулканизационных прессов Испытательная машина 3 сборочные линии Намотчик ...
Key data: 2000 mm, 1300 mm
доступный косой резак Berstorff Угол 0-50 градусов с ручным сращиванием 90 градусов с автоматическим сращиванием Сертификация CE Описание прилагается!
Key data: 200 mm, 500 mm
Прокатный стан в очень хорошем состоянии. Использованный. Без CE.
clamping force: 4.000 kNinjection volume: 4.000 cm³screw diameter: -- mmplaten size: 800 x 710 mmCondition: used,Specification: Rubber Injection Molding Machine - second-handclamping unit:- Clamping force: 4000 kN- heating platen size: 800 x 710 mm- ejection device: 2-layerInjection unit:- Injection volume max.: 4,000 cm³- Original screw 1005.10.008 B/cThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 350 kNinjection volume: 58,5 cm³screw diameter: 28 mmplaten size: 260 x 254 mmCondition: used,Specification: injection moulding machine for TPE - usedclamping unit:- clamping unit: vertical- clamping force: 350 kN- opening stroke max.: 300 mm- platen distance max.: 500 mm- Mould installation height min.: 200 mm- Clear width between tie bars: 260 x 254 mm- Ejector stroke max.: 80 mm- Clamping unit: VV- Lift of protective bonnet: 500 mmInjection unit:- Screw diameter: 28 mm- Screw L/D ratio: 18.6- Screw stroke max.: 95 mm- Injection volume max.: 58.5 cm³- Injection pressure: 1577 bar- Plasticising flow: 8.6 g/s- Injection flow: 85.5 g/s- Connected load: 3x 400 V, 50 Hz- Max. heating power: 5.8 kW- Drive power: 7,4 kW- Total power: ...
clamping force: 4.000 kNinjection volume: 2.700 cm³screw diameter: -- mmplaten size: -- mmCondition: used,Specification: Rubber Injection Molding Machine - second-handclamping unit:- Clamping force: 4000 kN- ejection device: 2-layer- Brush system: 2-layerInjection unit:- Injection volume max.: 2,700 cm³Two identical systems are available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mmroll length: 1000 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 45 kWCondition: used, overhauledSpecification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rollers- roller diameter: 400 mm- roll length: 1000 mm- Rolls: with core bore, with central chamber for water cooling- Fixed friction between the rollers- Rollers mounted on bronze bushes with circulating oil lubrication via pump,- equipped with new Johnson-Fluiten slewing rings, for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit: NEW- Manually tiltable steel guide plates with mechanical safety lock with mechanical safety interlock- Stainless steel roller container for holding the mixture- bi-directional safety bell ...
roll diameter: 660/700 mmroll length: 2100/1800 mmrolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kWCondition: usedSpecification: 4-Roll L-Calender - Line - second-hand 4-roll Buzuluk L-calender 700x1800 Mixing mill Buzuluk 660x2100Complete 4-roll L-calender line.The line was used for the production of transparent PVC.However, the basic machines can also be used for rubber.The most important machines in the line:Pos. 8: Liquid mixer make Trusionma hot and coldPos. 10: KO Kneader make BUSSItem 12: Buzuluk 660x2100 mixing roller millItem 14: 4-roll L-calender make Buzuluk 700x1800Items 15-19: Tempering and basin equipment behind the calender Roller conveyorItem 20: Layer thickness profile measuring deviceItem 23: Rewinding deviceThe system was used for transparent soft PVC.Machines are still installed.The data for this ad wa ...
machine measurements: 2.100 x 2.200 x 2.100 mmmachine weight: 2.000 kgpower capacity: 36 kWCondition: usedSpecification: cleaning and degreasing system FIRBIMATIC LOGICA 200V closed cleaning system for the cleaning of of metallic components with highly stabilised perchloroethylene - second-hand- Closed cleaning system for the cleaning of metallic components components with highly stabilised perchloroethylene.- PER-based cleaning and degreasing system Possible cleaning cycles: 1. pre-cleaning (spraying) 2. main cleaning (spray and flood cleaning) 3. rinsing (hosing down) 4. vapour degreasing 5. vacuum drying- All cleaning cycles are freely programmable.- Filling volumes: Tank 1: 170 litres Tank 2: 80 litres- Type of solvent: Perchloroethylene- Total connected load of motors: 9.65 kW- Installed e ...
Новый зигзагообразный резак! Машина предназначена для резки партии 800 мм на бесконечную полосу для подачи экструдера. Гарантия 12 месяцев! Описание прилагается!
диаметр образца: - ммдлина образца: - ммобщая потребляемая мощность: - кВтвес машины прим.: - tразмеры машины ок.: - мОбъемные образцы - резак / пробка пуансона
доступная гармонизационная машина для шлифования несбалансированных PCR_Tyres Описание прилагается! Сертификация CE
Press force max.:: 3000 kNheating plates:: 600 x 630 mmelectrically heated:: °Cheating power:: kWpiston stroke:: 420 mmno. of stages:: 1 Condition: Used, reconditionedSpecification: Press 600 x 630 mm, second-hand- clamping force: 300 tonnes (3,000 kN)- closing: from bottom to top- Heating platens: 2 electric platens, with new heating rods- Heating platen dimensions approx.: 600 x 630 mm- Distance between the heating platens approx.: 420 mm- New electric valves- AC machine output oil pump: 5.5 kW- New control cabinet with Siemens 7’ touch panel- PLC control system make Siemens S7-1200- New cabling- Frequency inverter made by Schneider- Light barriers in the front area,Overhauled in accordance with CE standard safety regulationsOperating instructions and maintenance instructions in GermanWarranty: 1 yearThe data for this ad was created with ModulMWS - the sof ...
clamping force: 400 kNinjection volume: 125 cm³screw diameter: -- mmplaten size: 600 x 400 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 40 t- clamping force: 400 kN- Heating platen size: 600 x 400 mmInjection unit:- Injection volume max.: 125 cm³- Connected load: 3x 400 V, 50 Hz 90A fuse protectionApprox. dimensions: 1,550 x 1,050 x 3,120 mmWeight approx.: 2,250 kgTwo identical systems are available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 400 kNinjection volume: 125 cm³screw diameter: -- mmplaten size: 550 x 400 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01Bclamping unit:- Clamping unit: vertical- Tonnage: 40 t- clamping force: 400 kN- Heating platen size: 550 x 400 mmInjection unit:- Injection volume max.: 125 cm³- Connected load: 3x 400 V, 50 Hz 90A fuse protectionApprox. dimensions: 1,550 x 1,050 x 3,120 mmWeight approx.: 3,200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press force max.:: 1600 kNheating plates:: 400 x 400 mmelectrically heated:: -- °Cheating power:: 9,92 kWpiston stroke:: 400 mmno. of stages:: 1 Condition: Used,Specification: Press 400 x 400 mm, second-hand steel frame construction- Clamping force: 160 tonnes- pressure force: 1600 kN- Operating pressure: 300 bar- Closing: from bottom to top- Heating platens: 2 electric platens- Heating power: 4.96 kW/platen- Heating platen dimensions: 400 x 400 mm- Specific pressing pressure: 1000 N/cm²- Distance between the heating platens: 500 mm- Piston stroke: 400 mm- Piston diameter: 260 mm- AC motor power: 7.5 kW- Pneumatic protective cover in the front area,- lifting device- Sliding table- Approx. dimensions: 1,760 x 1,150 mm- System height approx.: 2,470 mm- Weight appro ...
clamping force: 200 kNinjection volume: 80 cm³screw diameter: -- mmplaten size: 350 x 300 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 20 t- clamping force: 200 kN- Heating platen size: 350 x 300 mmInjection unit:- Injection volume max.: 80 cm³- Connected load: 3x 400 V, 50 Hz- Pump output: 11 kW- Total output: 44 kWDimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mmSpace requirement approx: 3 m²Weight approx.: 2.500 kgThere is also an identical system as a spare parts dispenser as an optionfor an extra charge. The control panel is missing here.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 400 kNinjection volume: 125 cm³screw diameter: -- mmplaten size: 300 x 300 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 40 t- clamping force: 400 kN- Heating platen size: 300 x 300 mmInjection unit:- Injection volume max.: 125 cm³- Connected load: 3x 400 V, 50 Hz 76A fuse protection (incl. peripherals)- Pump output: 7.5 kW, 14.9 A- Total output: 28 kWDimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mmWeight approx.: 2,250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 200 kNinjection volume: 80 cm³screw diameter: -- mmplaten size: 350 x 300 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 20 t- clamping force: 200 kN- Heating platen size: 350 x 300 mmInjection unit:- Injection volume max.: 80 cm³- Connected load: 3x 400 V, 50 Hz- Pump output: 11 kW- Total output: 44 kWDimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mmSpace requirement approx: 5 m²Weight approx.: 3.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
speed of feed:: 50 m/minfeed:: 5 - 99.999,9 mmcuts max.:: 70 - 80 Schnitte/mcross-section width:: 40 mmcross-section heigth:: 40 mmCondition: NEW,Specification: Hose and corrugated pipe cutting machine electric cutting machine - Cutting unit: Window cut with cutting bushes - Material diameter approx.: 4 - 40 mm - Transport by two drive belts - Max. distance between the belts: 45 mm - Belt adjustment via motor, adjustment via control panel - Belt adjustment via the centre - with a maximum speed of approx.: 50 m/min - Electrical contact pressure of the drive belts - Electronic length measurement from 5 - 99,999.9 mm Digital display - Step change: 0.1 mm - Cutting via electric motor - Quantity selectable: 1 to 99,999 ...
Key data: 305 mm, 550 mm
Доступный 22-дюймовый фрезерный станок Описание прилагается!
Key data: 190 mm, 450 mm
Лабораторная мельница в наличии! Описание прилагается!
Key data: 340 mm, 700 mm
Доступный 27-дюймовый фрезерный станок Описание прилагается!
clamping force: 2700 kNinjection volume: 3300 cm³screw diameter: -- mmplaten size: 780 x 670 mmCondition: used,Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition 6 months in useclamping unit:- Euromap (size): 2700-7200- Clamping force: 2,700 kN- Heating platen size L/W/H: 780 x 670 mm- Distance between upper and lower platen: 970 mm- Stroke min.: 420 mm- Stroke: 550 mmInjection unit:- Injection volume max.: 3,300 cm³- Injection pressure: 2,180 bar- Nozzle contact force: 80 kN- Connected load: 3x 400 V, 50 Hz, N- Back-up fuse: 125 A- Pump drive: 265 bar- Drive power: 22 kW- Pump speed: 66 rpm- ...
clamping force: 2700 kNinjection volume: 3300 cm³screw diameter: -- mmplaten size: 780 x 670 mmCondition: used,Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition almost unused!clamping unit:- Euromap (size): 2700-7200- Clamping force: 2,700 kN- Heating platen size L/W/H: 780 x 670 mm- Distance between upper and lower platen: 970 mm- Stroke min.: 420 mm- Stroke: 550 mmInjection unit:- Injection volume max.: 3,300 cm³- Injection pressure: 2,180 bar- Nozzle contact force: 80 kN- Connected load: 3x 400 V, 50 Hz, N- Back-up fuse: 125 A- Pump drive: 265 bar- Drive power: 22 kW- Pump speed: 66 rpm- C ...
