subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 401)
Waldner Dosomat 16, rotary, 6-head filling machine for aseptic filling of cups. Capacity: up to approx. 9.000 cups/hour. 3x Format sets: round 95 mm, square 65x65 mm and square 95x95 mm. Format change in the shortest possible time by the tool-free exchange of quick-change format plates, push-in cup destackers and lid magazines allow immediate response to the daily market requirements and to the realisation of strategic decisions in terms of cup design changes., Working principle:, - Automatic cup de-stacking storage buffer magazine for ± 15 minutes buffer (preformed cups)., - Cup de-stacking station., - Cup sterilisation using H2O2 and hot sterile air. All the necessary valves and lines are situated in a sterile module next to the machine. The cups passing through it are subjected to sterile air enriched with H2O2 and then finally dried with hot sterile air. In this way, especially moul ...
Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...
for water, lemonades and fruit spritzers. : 0.5 L, 1.0 L, 1.5 L : 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - - Manufacturer: Year of construction: 2001 - Manufacturer: Year of construction: 2001 - Manufacturer: & Year of construction: 1978 with downstream Velcorin dosing system - : - /, / Manufacturer: Year of construction: 2001 with chlorine dioxide and sterile water rinsing - -- Manufacturer: Year of manufacture: 2001 with Alcoa screw capper and liquid nitrogen dosing system - ...
A carousel for filling glass bottles and capping them with crown caps., Additional title: 50,000 bo/h, crown caps, Capacity: 50000 bph, Formats: 0,33 l LongNeck bottles, 0,5 l NRW bottles; crown caps, Running direction: rigth -> left, Operation / Control: Siemens S5, Base construction: filling level filler with return air tube, Features: 120 filling points, 24 sealing points, double pre-evacuation, high-pressure injection
Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...
Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler
Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (= long-tube filler) control: Siemens S7, built in 2019), Bo ...
Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label ...
Semi-automatic rotary system with four fill/cleaning heads. Suitable for: - processing of 15, 20, 25, 30 and 50 l kegs as well as 20 l containers - beer - lemonades (without fruit pulp) - Coca-Cola drinks - premix and postmix - water - wine, Additional title: Rotokeg, Capacity up to: 50 KEG/h at 50 l KEGs and 25 hl/h beer, Length: 1495 mm, Width: 1495 mm, Height: 2400 mm, Formats: keg types: volume: 15-50 l; diameter: 230-405 mm; height: 320-620 mm, Operation / Control: Siemens Simatic S5
Capacity: 360 Bo/h, Filling points: 6 pieces, Voltage: 230 V, Compressed air: min. 6 bar, Length: 1590 mm, Width: 700 mm, Height: 1875 mm, Formats: 0.33 L, 0.50 L, 0.7 L, 0.75 L, 1.0 L, 2.0 L, 3.0 L, 5.0 L, Base construction: steel rack, Features: including add-on parts, filling programm modifiable
Inspection machine for detecting damage and contamination in glass bottles, as well as for identifying foreign bottles., Nominal capacity of filler: 60000 b/h, Power: 10,7 kW, Water: max. 4 bar, consumption: 1,3 l/min, Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h, Length: approx. 2.995 mm, Width: approx. 2.370 mm, Height: approx. 2.600 mm, Weight: 5200 kg, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm, Machine partitioning: 94 mm, Operation / Control: Siemens S5, Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection
Precise fill level control for detecting underfilling and overfilling of bottles., P max: 10 bar, Current: 8 A, Voltage: 230 V, Frequency: 50 / 60 Hz, Length: 1,2 m, Width: 0,93 m, Height: 2,2 m, Weight: 350 kg, Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table
Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, pipi ...
Glass bottle filler and capper for filling beer as well as CO2-containing and non-CO2-containing soft drinks and capping with crown caps. Capacity: approx. 14000 bph. Fomat parts for Euro, NRW, Longneck and Vichy bottles., Additional title: 42 filling points, Capacity: 14000 bottles/h, Number of filling valves: 42, Voltage: 220/380 V, Length: 3,10 m, Width: 2,25 m, Height: 3,30 m, Formats: Euro, NRW, Longneck und Vichy type bottles with crown caps, Running direction: left -> right, Operation / Control: Siemens S5
Capper for aluminum screw caps. Capacity: approx. 14,000 bph. Suitable for capping NRW glass bottles with aluminum screw caps., Additional title: aluminum screw caps, Capacity approx.: 20000 bottles/h, Length: 1,9 m, Width: 1,25 m, Height: 2.2 m, Features: 8 capping heads
Manual barrel filling machine for the filling of bunghole barrels with lateral bunghole, horizontal filling of barrels., Width: 0,9 m, Height: 2,9 m, Weight: 200 kg, Formats: bunghole barrels with lateral bunghole, barrels filled horizontally, Material: stainless steel
Four-station filling system for large cans and bottles., Additional title: Siphon filler, Capacity: 200 Fl/h, Filling places: 4 pieces, Power: 100 W, Voltage: 230 V, Frequency: 50 Hz, Length: approx. 1,3 m, Width: approx. 0,75 m, Height: approx. 2 m, Formats: 5 l Party cans; 2 l siphon bottle, Features: The containers are pressurized before filling, CIP pipes
Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling., Additional title: cleaning and filling, Capacity: 60 Keg/h each 50 l, Operation / Control: Siemens S7-300, Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet
Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device
A fully automatic explosion-protected bottle filling system is offered. Filling station Mewes: 4 nozzles, suitable for alkaline and slightly volatile products, capper, labeling station Pago. Capacity max.: 1000 units per hour, container sizes: 150ml-1000ml, pneumatic drives. Accessories: working platform for container product feeding. Inspection by appointment possible.
O TBA 8 V110 1000ml Square é uma solução Tetra Pak que poupa espaço para preenchimento seguro e asséptico de líquidos. O seu design quadrado garante máxima estabilidade e exibição eficiente na prateleira.
Preformed Bottle Filling, Capping, Labelling and Packing Line for 2-litre plastic containers (jugs/bottles) for fresh milk with screw cap closure. The line is equipped with integrated control systems and is suitable for hygienic operation., Scope of Supply:, 1. Filling and Capping Machine, - Integrated gravity filling and screw capping system., - Designed for CIP (Clean-in-Place) cleaning., - Fully enclosed construction with access doors., - Equipped with sterile air filtration system., - 32 filling valves and 10 capping heads., - Touchscreen operator control panel., - Cap feeding bunker with conveyor to capping unit., Manufacturer: Weightpack, Model: WFT 32.10.160, Serial Number: WL239, Year: 2008, Capacity: up to 7.000 containers per hour, 2. Leakage Testing Unit (Squeeze Tester), Designed to detect container leakage after filling., Manufacturer: Teledyne TapTone, Serial Number: E05-00 ...
À venda há uma pequena linha completa de enchimento para vinagre ou óleo em garrafas de plástico. Atualmente, a linha está a 0,75 litros. e tem uma produção máxima de 4.000 garrafas/h. Toda a fábrica é composta pelas máquinas listadas abaixo: 1. Bunker para garrafas de plástico vazias, cerca de 6m de comprimento, capacidade: cerca de 400-600 recipientes 2. Sistema de triagem de garrafas Kamman tipo K23F A máquina garante que as garrafas a encher são transportadas verticalmente para fora da máquina, com a boca virada para cima Capacidade de triagem: aprox. 3.000-6.000 peças/h 3. Esteiras transportadoras 4. Enchimento a vácuo Leicht, modelo Cobert tipo Olimpia20/95 Com 20 postos de abastecimento Dimensões: LxLxH: 1.520x1.250x2.330 mm Diâmetro possível da garrafa: 55-120 mm Construído em 1989 6. Codificador de jato de tinta, make REA-JET, para ...
A fully automatic cup filler for buckets is available. Design: rotary machine, lanes: 1, output: approx. 3000 cups/h, filling volume: 850ml/1000ml. Documentation available. An on-site inspection is possible.
A Gasti cup filling and sealing machine for preformed round cups, which has been used in the dairy industry, is available. Cup diameter: 95mm, output range: 2500-4500cups/h, filling volume range: 50ml-500ml, max. product temperature: 100°C, max. product pressure: 2bar. An on-site inspection is possible.
A rotary indexing filling machine Hamba for piston-based dosing of liquid and viscous products is available. Cup diameter: 75mm, max. height: 80mm, filling volume range: 50ml-250ml, filling capacity: 4000/h, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible.
A fábrica de engarrafamento com cozinha de cantina, localizada num recinto completo, é venvida devido ao encerramento do local. 7 peças de chaleiras Schneider em V2A, dupla parede aquecida com 24 kW), 400 litros (num total de 2800 litros!) e um sistema de extração Nüssler e um sistema de enchimento Novapack (máquina rotativa) com filtro de ar LFA e equipamento completo para encher atualmente 500 gramas de chávenas com solução de desinfeção UV para copos e placas de circuito. As tampas de plástico são colocadas totalmente automaticamente após a tampo. Veja as fotos para mais detalhes. Vários acessórios e peças sobressalentes também são vendidos à medida que o local está encerrado. Provou que a instalação foi muito pouco utilizada e ainda pode ser visitada até ao final de março de 2026. Sistema disponível imediatamente no local. O prazo de entrega e montagem opci ...
A nossa máquina automática de enchimento de tubos de última geração é versátil e foi desenvolvida para apoiar de forma ideal empresas com os mais elevados padrões de qualidade. Graças ao seu trabalho de alta qualidade e à vasta gama de aplicações, oferece um funcionamento intuitivo que otimiza os seus processos de enchimento de tubos de forma eficiente e fiável. Os drives potentes e o sistema de controlo por ecrã tátil a cores, fácil de usar, permitem máxima flexibilidade nas trocas de formatos e produtos, e simplificam muito o enchimento do tubo. A máquina possui localizações de memória para uma definição rápida e reprodutível de todos os parâmetros relevantes da máquina. Se pretende otimizar os seus processos de enchimento de tubos através de uma produção forte e, ao mesmo tempo, de alta qualidade, nós, da Impuls Packaging, somos o seu parceiro ideal. ...
Grunwald Sistema totalmente automático de enchimento e vedação de copos - 3 Conjuntos de formatos (BJ 2019) - Codificação jato de tinta - Extensão de correia transportadora - Barra de dosagem incluindo inserções aeradoras (BJ 2020) Temperatura de enchimento: Recheio a frio Copo: A) Balde redondo de plástico com pega e cesto de recolha, ø175 x H 131 mm B) Copo redondo de plástico, aproximadamente ø 104 x H 55 ou 65 mm C) Balde redondo de plástico com pega e coletor de relva, ø 227 x H 194 mm Tampa: A+C) Tampa plástica deslizante (fecho à prova de violação) B) Blocos de plástico pré-perfurados + tampa deslizante Carga ligada: aprox. 12 kW, 3/400 V/N/PE, 50 Hz Necessidade de ar: ar comprimido seco, filtrado, 6 bar, aprox. 300 l/min. Dimensões: aprox. L 2.200 x L 2.200 x H 3.200 mm (sem correia de remoção e armário de controlo) Peso: apr ...
Linha de Embalagem de Café a Vácuo OPEM Arabella – 250 g – com Sistema de Gaseamento e Válvula – BJ 2005 Fabricante: OPEM Modelo: Arabella Ano de fabricação: 2005 Condição: Muito boa, totalmente funcional Localização: Alemanha Disponibilidade: Disponível imediatamente Descrição da máquina À venda existe uma linha completa de embalagens de café a vácuo para sacos de 250g (moídos ou grãos). A instalação está equipada com: • Sistema de embalagem de tijolos a vácuo • Gaseamento de gases inertes (purga de azoto) • Sistema integrado de válvula de aroma (Válvula de Desgaseificação) • Sistema de dosagem incluído • Embalagem de filme em rolo • Design monobloco compacto • Versão industrial "Made in Italy" A máquina é ideal para café recém-torrado e garante uma proteção ótima do aroma e uma vida ú ...
