custome made napkin making machine Find more here - .ucymachines/ Contact us at - sales@ucymachines
Tumbler screening machine used for fractionating of fine and ultra-fine bulk solids with high screening efficiency, for sensitive and valuable products, protective screening, dedusting and smooth operating principle. Diameter: 800 mm. Screen area: 0,5 m2. Rated electric power: ± 0,75 kW. This tumbler screening machine was previously used in a cheese plant in Europe., Type of Machine: Tumbler screening machine, Diameter: 800 mm, Screen area: 0,5 m2, Rated electrical power: ± 0,5 kW - 400 V - 50 Hz
Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg
Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg
Used Used Case Packer Wraparound: Year: 2006 Condition: As Is Used Case Packer Wraparound Year: 2006 Speed: 950 pz/h Glue closure Bottles: 6 and 12. Safety protections Code: JL 250 More details: https://bottlingscout.com
Used Used filler for oil 14 valves 2.000 bph: Year: 2004 Condition: As Is Used filler oil | 2004 Year: 2004 Speed: 2.000 bph Direction: clockwise Number of valves: 14 Type of filling: high vacuum Type of product: oil Safety protections Code: T 174 More details: https://bottlingscout.com
Used Used Case Erector mh-fj-3a: Year: 2015 Condition: As Is Used Case Erector mh-fj-3a: Model: MH-FJ-3A Year: 06/12/2015 Closing box by Tape Layout: Lenght 3050 mm; Weidht 1240 mm (with plate for cartons close, otherwise 2240 mm) Haight: 1700 mm Speed: 10 CPM Safety protections Code: G 88 More details: https://bottlingscout.com
FULLY-AUTOMATIC can be used in SEMI- AUTOMATIC mode with small different batches on and off when needed No operator (you save 1 man per shift) Low maintenance costs (no discs, just knives which can be re-sharpened) No need to reduce size, on most scraps. Suitable for film + foam + fibers, moisture and some contamination are well tolerated. Best degassing in the process, compared with other systems. Remote assistance through modem Agglomerator with barrel diam. 1500 mm.,LxWxH 4,3 x 2,3 x 5,050 mt. 570 kw , installed power abput 370 kw in work Steel cylinder case with inspection door, Side opening panel for inspection and replacing blades Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam vacuu ...
General SKU257Y891 MakeLacour S.a Type185 l No.ARC 81402 Year of construction2007 Mounted on legson wheels Pressure Working pressure1.5 Bar Working pressure jacket3 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume185 Ltr. Pressure1.5 Bar Specified Features - Pressure vessel Capacity185 l Vessel sizesDia. 600x600 mm Dished bottomcheck With covercheck Top connectionscheck Outletcheck Max. temperature0°C/+125°C With jacketvolume 30 l Max. temperature0°C/+125°C MaterialStainless steel 1.4404 (316L) With jacketcheck General LocationBarneveld Floorspace0,80 x 0,80 m Total height1,20 m Weight115 kg CEcheckGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIPressure vesselsUnknownIndustries > Pharmaceutical > Generic medicinesIndustrie ...
Liquid filler that fills eight packs at a time, This filler doses liquid, such as brine or sauce, through eight filling heads at once into jars or tubs. The liquid comes from the large hopper on top, and the volume in millilitres is set per programme on the touchscreen. The control currently holds programmes for cucumber and for a second product (Farmer)., The menus are in Dutch and there is a separate cleaning programme. We found no rating plate on the machine, so the make and year of manufacture are unknown. It stands on castors., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/8-head-volumetric-liquid-filler/, Type: Volumetric liquid filler, Filling heads: 8, Dosing: Adjustable in ml per programme, Controls: Festo touchscreen, Dutch menus, Cleaning: Separate cleaning programme, Constru ...
Checkweigher for boxes and crates, This checkweigher weighs boxes, crates or larger packs on a weigh platform with rollers. The product rolls across the scale, the weight shows straight away on the touchscreen and you can see per product whether it is within limits. The machine is compact, made of stainless steel and stands on adjustable feet., The screen holds product data and statistics per item. There is no legible rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/checkweigher-with-roller-conveyor/, Type: Checkweigher with roller conveyor, Weigh platform: Roller conveyor, Controls: Touchscreen with product data and statistics, Construction: Stainless steel, on adjustable feet
Platform scale up to 30 kg, reading in 10 g steps, This stainless steel platform scale weighs from 0.2 to 30 kg with a division of 0.01 kg. The weighing platform sits freely on the table, while the indicator is mounted on a stainless column at eye level. Useful for weighing portions, crates or ingredients., The indicator is an IT1000 with keys for tare, zero, totalising and printing. We did not find a rating plate with the make or year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/stainless-steel-30-kg-scale-with-it1000 -indicator/, Type: Platform scale, Weighing range: 0.2 – 30 kg, Division: 0.01 kg, Indicator: IT1000 on stainless column (tare, zero, totalising, print), Construction: Stainless steel
Mixing kettle that tilts for emptying, This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor., It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/tilting-mixing-kettle/, Type: Tilting mixing kettle, Lid: Pneumatically locked, Discharge: By tilting the kettle, Controls: Separate control cabinet with push buttons and emergency stop, Construction: Stainless steel
Cabbage corer on a stainless steel stand, This cabbage corer removes the hard core from a cabbage. The cabbage goes into the opening at the top, the toothed coring head comes down pneumatically and turns the core out; the removed core drops out underneath., The machine is built entirely in stainless steel and stands on four legs with adjustable feet. The pneumatics sit in a box on the side. There is no type plate, so make and year are not known. Trying it with your own product can be arranged., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/pneumatic-cabbage-corer/, Type: Cabbage corer, Drive: Pneumatic, Controls: Pneumatic box with valves, Construction: Stainless steel, on legs with adjustable feet
Spin dryer for washed vegetables, This centrifuge spins washed lettuce, vegetables or herbs dry. The product goes into the removable blue basket, the lid closes and the machine spins the water out, which drains through the outlet at the side., Spin time is set with the timer switch on the base. There is no manufacturer rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vegetable-spin-dryer/, Type: Vegetable spin dryer (centrifuge), Basket: Removable plastic basket, Controls: Timer switch, Drain: Water outlet at the side, Construction: Stainless steel, hinged lid
General SKU291Y503 LocationBarneveld Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface2.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangerJacketed tube heat exchanger Horizontalcheck Heating surface2,5 m² Tube capacity12,42 l. Number of tubes:7 Tube diameter19,5 mm Tube length2970 mm Shell capacity17,44 l. Shell diameter80 mm Shell length2970 mm Shell connections2x DN50 Cover connections2x 1 1/2: MaterialStainless steel 1.4301 (304) General MakeUnknown Floorspace3,3 x 0,6 m Total height1,3 m Extra Specifications1.4571Generic medicinesOintmentsFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersShell and tube heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyOther feedConfectionerySolid phar ...
General SKU291Y504 LocationBarneveld Main Features MaterialStainless steel Motor7.2 KW Length1200 mm Specified Features - Stirrer Stirrercheck Turbo stirrercheck Shaft length1200 mm Sizes stirring headø 140 x 70 mm Motor6/7,2 kW 1450/2915 rpm With frequency controllercheck MaterialStainless steel 1.4301 (304) General MakeUnknown With switchcheck Floorspace0,5 x 0,45 m Total height2 m Weight100 kg Extra Specifications3 piecesPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsStirrersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorg ...
General SKU291Y816 MakeUnknown LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Length1000 mm Specified Features - Stirrer Stirrercheck Dissolver stirrercheck Shaft length1000 mm Sizes stirring headø 360 x 30 mm Motor± 7,5 kW MaterialStainless steel 1.4401 (316) General Floorspace0,25 x 0,35 m Total height1,65 m Weight80 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsStirrersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPaints & coatingsConsumer wasteOils & fatUnknownIndustries > Food & Feed > Powdere ...
General SKU291Y814 MakeUnknown LocationBarneveld Main Features MaterialStainless steel Motor2 KW Length200 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length200 mm Sizes stirring headø 260 x 55 mm Motor2 kW 220/380 V 950 rpm Speed mixing shaft950 rpm MaterialStainless steel 1.4408 General Floorspace0,35 x 0,35 m Total height0,8 m Weight60 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsStirrersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPaints & coatingsConsumer wasteOils & fatUnknownIndus ...
General SKU291Y815 MakeSCABA Type30VA No.311223-a / 93.1936-02-01 Year of construction1993 Main Features MaterialStainless steel Motor0.75 KW Length750 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length750 mm Sizes stirring headø 260 x 60 mm Motor0,75 kW 220/380 V (Ex) Speed mixing shaft308 rpm MaterialStainless steel 1.4571 (316Ti) General Floorspace0,35 x 0,35 m Total height1,5 m Weight80 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsStirrersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorgan ...
General SKU291Y817 MakeUnknown LocationBarneveld Main Features MaterialStainless steel Motor4 KW Length105 mm Specified Features - Stirrer Stirrercheck Turbo stirrercheck Shaft length105 mm, 80 mm Sizes stirring headø 120 x 80 mm Motor4 kW 230/400 V 2900 rpm Speed mixing shaft2900 rpm General Floorspace0,3 x 0,3 m Total height1,6 m Weight80 kg Extra SpecificationsMoC: 1.4347Powder/liquid suction inlet at shaftPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsStirrersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPaints & coat ...
General SKU291Y822 MakeUnknown LocationBarneveld Main Features MaterialStainless steel Motor0.37 KW Length580 mm Specified Features - Stirrer Stirrercheck Dissolver stirrercheck Shaft length580 mm Sizes stirring headø 100 x 30 mm Motor0,37 kW 220 V 1390 rpm Speed mixing shaft1390 rpm MaterialStainless steel 1.4552 General Floorspace0,2 x 0,3 m Total height0,96 m Weight20 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsStirrersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPaints & coatingsConsumer wasteOils & fatUnknownIn ...
General SKU291Y515 MakeUnknown TypeUnknown No.Unknown Year of constructionUnknown LocationBarneveld Main Features MaterialStainless steel Motor11 KW Inlet diameter50 mm Specified Features - Inline mixer Colloid millcheck Colloid mill in linecheck Rotor sizesø 160 x 30 mm Teethed rotorcheck Inletø 50 mm Outletø 55 mm Motor± 11 kW With variable speed drivecheck Inline high shear mixers MaterialStainless steel 1.4408 General Mounted on wheelscheck With switchcheck Floorspace0,8 x 0,8 m Total height1,3 m Weight500 kgGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesInline high shear mixersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsOils & fatUnknownIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustrie ...
General SKU257Y265 LocationBarneveld CEcheck MakeHoriba TypePentra C400 Mach.No.609C4-0424 Year of construction2016 Floor space1,0x0,65 m Total height0,57 m Weight120 kg Extra Specifications100-240 V., with cooling unit: Horiba ABX SAS CU401Powdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsQuality ControlsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPaints & coatingsConsumer wasteOils & fatundefinedIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustrie ...
Spine gluing machine, with heated au-bain-marie bin for warm animal glue, can also be used for cold glue, roll width: 105 mm, with static brush, Single phase
