Fabricante:
(Categoria: 706)
Equipment: Overpressure,Manufacturer: Noble Tank,Condition: used,Volume: 3,000,Max. overpressure: 2.0,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 1,390,Cylindrical height: 1,500,Total height: 2,500,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: disc,Outlet: DN50 DIN 11851 ,Note: slight adhesions,Remarks: Manhole Dimensions: approx. 300 x 395 mm (the manhole cover is missing),last use: Brewery,Surface exterior: marbled,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No,Current interferer:
Equipment: Overpressure,Manufacturer: Coelho,Condition: used,Volume: 3,660,Max. overpressure: 3,00,Max. permissible Operating temperature : 85,Bottom floor: Cone bottom,Design: upright,Stand shape: Feet,Number of feet: 3,Diameter inside: 1,600,Cylindrical height: 1,500,Total height: 3,850,Wall thickness underbody: 5.1,Wall thickness cylinder: 6.1,Wall thickness upper floor: 5.6,Manhole / dome: Hand hole,Type plate: Yes,Equipment: Crane eyelets,Outlet : 60,Note: slight adhesions,Remarks: Cone height approx. 800 mm 1 hand hole diameter 350 mm in the top floor 1 small bump in one of the feet (see photos), last
Equipment: Overpressure,Manufacturer: Martin Rosa KG,Condition: used,Volume: 6,200,Max. overpressure: 8.0,Design: lying,Base: feet,Number of feet: 4,Diameter inside: 1,600,Cylindrical length: 2470,Overall height: 1,900,Total length: 3,400,Wall thickness shelves: 4,Wall thickness cylinders: 4,Type plate: Yes,Outlet: DN65 DIN 11851 ,Note: slight adhesions,Remarks: 1 manhole approx. 320 x 420 mm in the front floor (one container is missing the manhole cover) with 1 tank the nameplate is missing Front floor outside marbled foot ends partially shortened, total height may vary slightly, last
Equipment: Insulation, Overpressure,Manufacturer: ABAB General Tank and Apparatus Construction,Condition: Used,Volume: 10,000,Max. Overpressure: 5.00,Max. permissible Operating temperature : 20,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Insulation: available,Insulating sheath: hermetically welded,Material insulating sheath: Stainless steel,Diameter inside: 1,800,Diameter outside: 2,000,Cylindrical height: 4,000,Total height: 5,200,Wall thickness floors: 7,Wall thickness cylinder: 5,Technical documents: Drawing, TÜV papers,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Level indicator
A Technibag bag-in-box filling machine for filling liquids into BIB bags is available. Products: wine/juice/etc., filling capacity: approx. 140/h, bag volume: 3l/5l/10l/20l. An on-site inspection is possible.
Warehouse Service for Used Machines Our storage service extends greater flexibility for both buyers and sellers seeking to purchase or sell used beverage machines. With access to our dedicated warehouse, sellers can improve their resale value by extending the selling cycles, while buyers can take advantage of temporary storage options to better coordinate their used machinery purchases with their delivery requirements. For Sellers Get your machines out on time and still maximize your resale value: We store your machine as long as it takes to get the best resale value for your asset. Store-And-Sell Option Avoid scrapping Maximize resale values For Buyers Secure your machine and plan your project with no time pressure: We store your machine as long as you need to set-up your project and be ready for assembly. Buy-And-Store Option Secure purchase opportunities Increase logistics ef ...
O aplicador de pegas Mariani INOX foi desenvolvido para a aplicação automática de alças de transporte em pacotes múltiplos de bebidas ou recipientes para garrafas. A máquina trabalha em linha dentro da linha de produção, garantindo um posicionamento preciso e fiável das pegas a altas velocidades de produção. Fabricante: Mariani Aplicador de Pega Modelo INOX Ano 2005 Condição Utilizada Número de stock 103823 Tipo PLC 6ES7 214 SIEMENS Voltagem: 400V Frequência 50 Hz
Complete bottle forming, filling and packing line for 1,5 liter sterilized milk with blowers, filler, capper, sterilization towers, palletizers etc. The line is already dismantled and boxed in crates., General:, Size of the bottles: 1,5 liter milk bottle with stopper (cap), Bottle dimensions: width 93,9 mm, height 282 mm, Weight bottle: 44 gram, weight aluminium 0,4 gram and weight cap 4 gram, Material of the bottle / Compesition: PE (Polyethylene), Neck diameter of the bottle: 46,7 mm, Bottle closed with a aluminum and easy peelable cover, Capacity of the line: 7.000 bottles per hour, Product: Whole cow’s milk, which has been treated with a heating process in such conditions of temperature and time able to ensure the destruction of microorganisms and the inactivity of their resistance forms., Closed bottle shelf life: 6 months since the date of manufacture, Opened bottle: maximum thre ...
Complete aseptic line for the production of pasteurized products (using it for ice tea bottles). The line is installed in 2005, has been operating since 2006 and ran till Q3 of 2026. Now the line is dismantled and stored in a warehouse of the premisses of the client. The line includes processing area (mixer, pasteurizer and sterile buffer tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper., General:, Size of the bottles: 400 ml / 500 ml / 1,5 liter bottle with stopper (cap), Material of the bottle / Compesition: PET, Bottle closed with a snap cap, Capacity of the line: depending on the bottle size: 18.000 l/h and 27.000 l/h, Product: Ice tea (softdrink), Scope of Supply:, 1 ...
Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI. Technical data Formats: 28 × 1.5 closures Application: Capping of bottles (roll-on closures) Configuration: Rotary turret with 12 capping heads Neck finish: 28 × 1.5
À venda há uma pequena linha completa de enchimento para vinagre ou óleo em garrafas de plástico. Atualmente, a linha está a 0,75 litros. e tem uma produção máxima de 4.000 garrafas/h. Toda a fábrica é composta pelas máquinas listadas abaixo: 1. Bunker para garrafas de plástico vazias, cerca de 6m de comprimento, capacidade: cerca de 400-600 recipientes 2. Sistema de triagem de garrafas Kamman tipo K23F A máquina garante que as garrafas a encher são transportadas verticalmente para fora da máquina, com a boca virada para cima Capacidade de triagem: aprox. 3.000-6.000 peças/h 3. Esteiras transportadoras 4. Enchimento a vácuo Leicht, modelo Cobert tipo Olimpia20/95 Com 20 postos de abastecimento Dimensões: LxLxH: 1.520x1.250x2.330 mm Diâmetro possível da garrafa: 55-120 mm Construído em 1989 6. Codificador de jato de tinta, make REA-JET, para ...
Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data Total output: 70 cycles/min electrical connection: 400V/N/PE/50Hz, 5,1kW Two lanes Additional information conveyor for packages available
Overview This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled)
Overview This semi-automatic new glass pusher was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be viewed in person at any time. Technical details Semi-automatic new glass pusher with interchangeable gripper units 4 heads: adjustable depending on the layer pattern ALWID FEEDING TABLE + ALWID DEPALLETIZER
Zum mixen aller Flüssigkeiten bis zu einer kinematischen Viskosität von v=11000mm²/s - z.B.von Wasser, Öl,Alkohol Wein Säfte Milch usw.Spannung 380 Volt / 220 VoltAmper 10-16
The Florin Mini Compact Dryer is a compact drying system for applications where residual moisture must be removed or products must be blown off specifically. The system was developed as an energy-efficient alternative to classic compressed-air blow-offs and operates without a compressed-air supply., Typical application areas are blowing off coded surfaces before labeling, removal of residual moisture after washing or filling processes, drying of closures, cap feeding, and ejection of empty bottles. The compact design allows the system to be integrated into existing production lines even in confined spaces., With a power consumption of up to 180 watts and an air flow rate of 52 m³/h, the Mini Compact Dryer offers an energy-efficient solution for numerous applications in the beverage, food, and packaging industries. The IP67 protection rating enables use in demanding production environmen ...
usava
Fila de enchimento para latas Preparar para latas de 330 e 500 ml Capacidade: 6.000 latas/h com latas de 330 ml Embalagem: latas de 3x4 ou 4x6 em tabuleiro em papel de alumínio embalado em plástico consistindo essencialmente em: 1. Despaletizador TMG Impianti 2. Carbonator Comac, Ano de Fabricação: 2007 3. Ceifeira de enchimento e vedação Tipo MCD: 16/4 também fabricado pela Comac, ano de fabrico: 2007 4. Pasteurizador de túnel Comac, Bauahr: 2007 5. Montador de tabuleiros, embalador de bandejas, máquina de embrulhar filme Tipo Dimac Star One A instalação está atualmente completamente construída e encontra-se em excelente estado. É vendido com o dispositivo de controlo associado e as correias transportadoras (ver layout anexo). Pode ser visitado se necessário.
Máquina de Moldagem por Sopro KOSME KSB 4000 Ano de Fabricação: 2003 Capacidade: até 4.700 garrafas por hora incluindo o sistema de alimentação de pré-forma Formato do braço: PCO 1810 A máquina está fora de produção desde outubro de 2025 e já foi desmontada.
Equipment: Overpressure,Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 83,500,Max. overpressure: 0.5,Max. permissible overpressure Operating temperature : 50,Specific gravity of the medium: 1.35,Design: upright,Stand shape: feet height adjustable,Number of feet: 8,Diameter inside: 3,850,Cylindrical height: 600,Total height: 8.690,Wall thickness underbody: 5.4,Wall thickness upper floor: 3.0,Year of construction: 2004,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: Yes,Equipment: Ventilation/ventilation, spray head, crane eyelets,Outlet: DN100 DIN 11851 ,Remarks: Specified total height
Oferecemos uma tampa LIDA para coroas de coroa: Semi-automática de 1 cabeça Capacidade: 1000 garrafas/hora Garrafas: 0,33 - 0,7 L Ligação de energia / potência instalada 230/50Hz / 0,12 kW Pressão do ar: 6 bar Dimensões: Comprimento: 500 mm Largura: 500 mm Altura: 2.000 mm Peso: 120 kg
Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition. Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L) Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm) Application: CSD Hygienic design condition: good technical con ...
Oferecemos dois contentores de armazenamento usados. Altura total: 1980 mm Diâmetro: 625 mm Capacidade: aprox. 300-350l
Overview This filling monoblock was manufactured by MBF in 2001 and is designed for the filling of hot fruit juice (up to 95°C). The Synchrofil LV operates with an atmospheric (gravity) filling system and includes an integrated capping unit for aluminum screw caps (MCA standard). The machine is equipped with 35 filling valves and 4 rolling capping heads. It is adjusted for 1.0 L and 0.5 L VdF glass bottles with a diameter of 89.5 mm. The machine runs clockwise l-r and reaches a capacity of up to 7,000 bottles per hour. It is equipped with automatic speed control, CIP tank for automatic cleaning, and closure control systems. Technical Data manufacturer: MBF model: Synchrofil LV 1200-35 / 240-4V year of manufacture: 2001 condition: used filling system: atmospheric (gravity) filling temperature: up to 95°C number of filling valves: 35 number of capping heads: 4 (rolling heads) closure typ ...
Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack confi ...
