Fabricante:
(Categoria: 202)
Used MUTI OM MINOR chain mortiser for cutting rectangular holes and mortises in wooden pieces, suitable for making window and door frames. Vertical type machine with a chain cutting head, a work table raised by rack and a manual lowering lever for the head. Technical data (manufacturer's brochure): - Manufacturer: MUTI - Model: OM MINOR - Type: Chain mortiser - Maximum mortise length: 280 mm - Vertical stroke of the head: 180 mm - Vertical travel of the work table (retractable): 230 mm - Motor: 1.8 HP (1.32 kW) - Dimensions: 1960 x 610 x 830 mm - Weight: approx. 175 kg - Equipment: chain lubrication pump, maintenance keys Condition: Used, checked by our technicians and ready to work Warehouse reference code: N051/215 Auction-ID: A7-50988-3
Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-263
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-280
Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-261
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-277
Fully reconditioned spindle moulder with saw disc and sliding carriage. Saw disc moves vertically and horizontally, independent motors: 3 HP / 380 V on the saw disc and 4 HP / 380 V on the spindle. Carriage travel 75 cm, saw disc diameter up to 350 mm, spindle shaft 50 mm, carriage clamp with mitre fence, spindle tool diameter up to 250 mm. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-72
- Serial number 10474. - Maximum installed power 9 KW. - Maximum workpiece length approx. 2400 mm. - Maximum workpiece width approx. 330 mm. - Table for holding the templates. - 6 pneumatic clamping grippers. - 2 milling groups (right-left) with 5.50 KW motors. - Protective fences are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-56
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-268
HEAVY DUTY CRAB ITALIAN REPAIRED N005/1951 2 gears in the engine Power: 5,5Hp / 380V Diameter of spinning shaft 50mm Front plate extension for large pieces Auction-ID: A7-50988-93
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-274
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-271
Professional chain mortiser by Masterwood (MUTI), model OM M250 (OM.250), Italian manufacture. Sturdy and reliable machine for daily use in a joinery workshop. Ideal for making doors, window frames, wood joints and any work requiring fast and precise mortising. Vertical type machine with a chain cutting head and a tilting work table with a graduated angle scale. Features: - Italian construction - Powerful motor - Head / table angle adjustments - Clean and precise cutting - Checked by our technicians and ready for operation Technical data: - Manufacturer: Masterwood (MUTI) - Model: OM M250 (OM.250) - Type: Chain mortiser - Vertical stroke of the head: 150 mm - Maximum workpiece height: 180 mm - Maximum mortise length: 260 mm - Cross travel of the head: 70 mm - Door height (min to max): 740 to 1030 mm - Work table size: 470 x 140 mm - Table tilt: -45 to +45 degrees - Door clamp: yes - Ch ...
Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-28
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-276
Fully reconditioned spindle moulder with sliding table (carriage) for rebating, tenoning and shaping of timber pieces with precision. Motor 4 HP - 380 V. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-76
Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-260
Chain mortiser (mortising machine) by RGA, model SM400, used. Used for cutting rectangular and parallel mortises in wood, mainly for window and door frames. Technical specifications: Engine power 2.2kW. Max. mortise depth 150mm. Max. mortise length 340mm. Head stroke 300 x 80mm. Head rotation ±45°. Workpiece height 600-1000mm. Table size 460 x 135mm. Table tilt ±45°. Supplied with chain kit. Checked and ready to work Auction-ID: A7-50988-110
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-273
Fully reconditioned spindle moulder with saw disc and sliding carriage (Rafailidis). Operations: spindle moulding, saw disc, carriage/support. Saw disc motor 3 HP. Tool bore plate for spindle cutter: 170 mm / 230 mm. Carriage dimensions 113 x 32 cm, carriage base length 2.05 m, 2 air clamps on the carriage, 2 speeds on the electric switch. Saw disc diameter 250 mm, cutting height 60 mm, cutting length with carriage 950 mm, table dimensions 113 x 80 cm, spindle shaft 50 mm, spindle shaft height 170 mm, horizontal saw disc travel 80 mm, internal spindle fence aperture 300 mm. The saw disc moves up-down and left-right relative to the spindle axis. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-73
Used Griggio T1000 spindle moulder (shaper) for woodworking. • Brand: Griggio, model T1000. • Spindle diameter: 50 mm. • Condition: has not been in operation for several years; inspection and testing are required before use. • Typically used for profiling, moulding, grooving and rebating of solid wood components in joinery and furniture production. Auction-ID: A7-50988-131
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-267
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-5
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-269
Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-262
Used double tenoning machine (double automatic tenoner) of Italian manufacture, PADE, model SCD / U, ref. N0002/0123. Suitable for professional use in joineries and furniture workshops. The double head increases productivity and gives stable, accurate cutting. Repaired by our workshop, fully operational Repaired by our specialised workshop and fully operational. Model SCD / U: unlike the PADE SCD model, where the head moves only horizontally, the SCD / U cuts the tenon with a copying system with a movement from 0 to 90 degrees. This way it can produce horizontal and vertical tenons without templates (jigs). Technical data: Head speed: 8000 rpm Tenon length: 4 - 100 mm Tenon thickness: 4 - 30 mm Tenon depth: 10 - 90 mm Head spindle motor: 3 HP Head movement motor: 2 HP Net weight: 900 kg Dimensions: 1500 x 1250 x 1200 mm (height) Auction-ID: A7-50988-16
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-270
Used MUTI OM MINOR chain mortiser for cutting mortises in wood. Vertical type machine with a chain cutting head, a work table raised by rack and a manual lowering lever for the head. Mainly used in joinery and furniture manufacturing, where mortises are needed for mortise-and-tenon joints. Technical data (manufacturer's brochure): - Manufacturer: MUTI - Model: OM MINOR - Type: Chain mortiser - Maximum mortise length: 280 mm - Vertical stroke of the head: 180 mm - Vertical travel of the work table (retractable): 230 mm - Motor: 1.8 HP (1.32 kW) - Dimensions: 1960 x 610 x 830 mm - Weight: approx. 175 kg - Equipment: chain lubrication pump, maintenance keys Condition: Used, in working condition Auction-ID: A7-50988-153
Used Steton tenoning machine for window and door frames. Equipped with a disc shaft for scoring, a horizontal up-down shaft for tenoning (4 kW - 380 V) and a vertical shaft for profiling, rebating or tenoning (4 kW - 380 V). Full technical inspection carried out by our specialised technical department. Fully technically checked, delivered with new machine warranty Auction-ID: A7-50988-17
LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-275
Professional chain mortiser by NGA, model SM500, Italian manufacture. Sturdy and reliable machine for high-precision woodworking, ideal for making doors, window frames, cases, mortising and special wood joints. Suitable for daily professional use. Features: heavy and durable construction, powerful 3-phase motor, automatic chain lubrication, clean and precise cutting, fast production work. Repaired by our technical department and fully functional. Cutting tools/chain provided extra. Auction-ID: A7-50988-2
650 € 
