Fabricante:
(Categoria: 203)
In its original box. Never used. Carton size: 121 x 57 x 58 Auction-ID: A1-46992-10750
Oertli high-performance folding cutter with indexable inserts Z3 Auction-ID: A1-47205-2146
- Number of axles: 4 pieces - Planing height: 120 mm - Planing width: 220 mm - Including set of straight planing heads Auction-ID: A1-41998-148
Equipped with scoring unit with electro-pneumatic deployment control; Machining with cross support; joint milling unit with 2 motors and cross support; universal saw/milling motor with cross support; conveyor chains; upper pressure with chain and web steering; stepless feed speed 8 - 40 m/min; working height 900 mm; workpiece thickness up to 100 mm; workpiece overload min. 15 mm, max. 200 mm; minimum working width 70 mm single-sided, 200 mm double-sided; supply motor 4kW; including power box, extraction hose/pipes up to the ceiling, various separate hoods and manual; Auction-ID: A1-44305-16
Top and bottom planer, width: 610mm, Supply/discharge table (257x107x85cm) with 4 rollers; including flexible hoses up to the ceiling Auction-ID: A1-44305-18
number of spindles: 6 working width: 230 mmplaning height: 160 mmControl: ATS Driven table rollers: 1 feed: 24 m/minfeed motor: 4 kWLength of the planing table: 2.500 mmWeinig Unimat 23 automatic planer and moulder for four-sided planing and profiling of timber with ATS system, reinforced Kaschwig shuttering protection cabin and universal spindle.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Equipped with digital readout, interchangeable blades, various flanges, manuals and flexible hose/tubes up to aa; the ceiling; power 32kW, working pressure compressed air 6 bar, cutter Ø 125 mm, Saw Ø 400 mm, minimum length 200 mm, maximum length 3000 mm, minimum width 50 mm, maximum width 280 mm, minimum thickness 14 mm, maximum thickness 30 mm; including elevator belt Auction-ID: A1-44305-11
Equipped with feed table 300x55x100 cm, 2 conveyor chains with prism guide (length approx. 2400 mm), 2 pressure chains with drive motor and height adjustment, 2 machining motors with profiling cutter Ø 250 mm and height adjustment, 2 machining motors with facet cutter Ø 150 mm and height adjustment, width adjustment and safety screen; cap. width at least 90 mm, width at most 300 mm, thickness at least 12 mm, thickness at most 24 mm, length at least 450 mm, length maximum 3000 mm; total power approx. 25kW; including flexible hoses up to the ceiling and lift table Auction-ID: A1-44305-5
Tersa knives in the ashes. Inhibited. Auction-ID: A1-47074-94
Number of boring spindles: 8 St.Working width: 230 mmWorking height: 160 mmFeed motor: 5,5 kWFeed speed: 36 m/min.Control: Logocom Planing and moulder Weinig Unimat 3000 Brillant. Computer-controlled ProfiCenter for planing and profiling work with CNC-controlled spindles and loading magazine Weinig EM11.The control panel was equipped with the current Simatic Panel PC677C-15 in 2021.The sale takes place on behalf of the customer ex works. A viewing is possible at any time by arrangement.Spindle 1: Bottom / HSK Powerlock / 12,000 rpmSpindle 2: Right / HSK Powerlock / 4,000 - 12,000 rpmSpindle 3: Left / HSK Powerlock / 4,000 - 12,000 rpmSpindle 4: Right / HSK Powerlock / 4,000 - 12,000 rpmSpindle 5: Top / HSK Powerlock / 4,000 - 12,000 rpmSpindle 6: Bottom / HSK Powerlock / 4,000 - 12,000 rpmSpindle 7: Top / HSK Powerlock / 4,000 - 12,000 rpmSpindle 8: Bottom / HSK Powerlock / 4,000 - 12,00 ...
Number of boring spindles: 6 St.Working width: 220 mmWorking height: 120 mmLength of the planing table: 2.000 mmFeed motor: 5,5 kWFeed speed: 36 m/min.Grooved table: Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-24 m/min.Dimensions (L/W/H): 3900 x 2200 x 2000 mmweight of the machine ca.: 2500 kgWeinig Profimat 23 Four-Sided Planer – Window Version(With glazing bead separation feature, or usable as a grooving spindle)ATS Control and Program Control-------------------------------------Technical Specifications Summary(Please inquire regarding any additional accessories that may be included)-------------------------------------General----------------- -------------------> Working width: 230 mm> Working height: 120 mm> Number of spindles: 6> Infeed table length: 2500 mm> Feed motor: 3 kW> Feed speed: 5–24 m/min> Total power requirement: 27 kW> Dimensions: 3900 x 2200 x 2000 mm> Machine weight (approx.): 2500 kgSpindle Arrangement------------------------------------ ...
Number of spindles: 5 St.Working width: 20 - 230 mmWorking height: 8 - 120 mmLength of the planing table: 2500 mmFeed motor: 1,1 kWFeed speed: stufenlos regelbar 2-12 m/min.weight of the machine ca.: 2500 kg1 WEINIG VARIOMAT Planing and Moulding Machine---------------------------------------Brief Summary:---------------------------------------- 5 spindles- Powerful motors- Cycle-controlled jointing- MemoryPlus control system- Option: Stähle-Hess Saturn single-piece sanding machineTechnical Manufacturers Description:---------------------------------------Working width: 20 – 230 mmWorking height: 8 – 120 mm1st Spindle: Horizontal Bottom---------------------------------------Motor with brake: 7.5 kWDiameter: 40 mmSpeed: 6000 rpmTool cutting circle: 125 – 145 mmAxial adjustment range: 5 mmRebating device incl. rebating cutters2nd Spindle: Vertical Right-------------------------------- ...
Max working width 300 mm, max height 250 mm, power supply 230 V Auction-ID: A7-46472-14
Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.control: Memory-Funktion Weinig Powermat 500 with grooved table----------------------------------The machine arrives at the warehouse and is cleaned and fully inspected.Brief Summary:----------------------------------- 5 Spindles- 8,000 rpm- Grooved table for short or difficult-to-guide workpieces, coatedwith Marathon PowerCoating- One driven roller in the outfeed table, hardened: 210 mm wide- Left and top spindles controlled for width and height- Quick-release spindle nutDetailed Description:---------------------------------------------------------- -------------Technical Data:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 51st Spindle - bottom----------------------------------------------- Motor with brake: 7.5 kWSpindle dia ...
Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled------------------------------------------------------------ ----------This machine is currently being refurbished at our facility!Pictures taken before dismantling and currently during the processing phase!Brief Summary:-------------------------------------------------------------- --------5 spindles with 8,000 rpm4 x HSK/PowerlockAxially and radial CNC adjustments of the spindles via controlCNC-controlled adjustment and positioning of the feedTable tops with guide blades at spindles 2 and 3.Includes Weinig/Neumann RF 15 return conveyor systemDetailed Description:---------------------------------------------------------- -------------Technical Data:Working ...
Number of boring spindles: 7 St.Working width: 170 mmWorking height: 120 mmPlaning and moulder Weinig type Unimat 17A for four-sided planing and profiling of timber with universal spindle. Incl. shuttering protection cabin, suction pipes and planing heads.Spindle 1: BottomSpindle 2: RightSpindle 3: LeftSpindle 4: RightSpindle 5: TopSpindle 6: BottomSpindle 7: UniThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring spindles: 4 St.Working width: 230 mmWorking height: 160 mmFeed motor: 11 kWFeed speed: 60 m/min.Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of timber including infeed mechanization Weinig High Mech E 1.The machine has a Memory Plus system with electronic positioning (radial) of the spindles 3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring spindles: 7 St.Working width: 220 mmWorking height: 120 mmtotal power requirement: 42 kwFeed motor: 7,5 kWPlaning and moulder Weinig type Unimat 22 E for four-sided planing and profiling of timber incl. shuttering protection cabin, suction pipes and planing heads.Two driven rollers in the table.The machine is function-tested, dismantled and ready for loading.Spindle 1: Bottom / 5.5 kW / 40 mmSpindle 2: Right / 4 kW / 40 mmSpindle 3: Left / 6.5 kW / 40 mmSpindle 4: Right / 5.5 kW / 40 mmSpindle 5: Top / 4 kW / 40 mmSpindle 6: Bottom / 4 kW / 40 mmSpindle 7: Top / 5.5 kW / 40 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
planing width: 30-260 mmplaning height: 10-200 mmnumber of spindles: 6 Weight: 6650 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2.000 mmFeed motor: kWPlaning and moulder Weinig Profimat 23 for four-sided planing and profiling of timber incl. a set of planing heads.Including dismantling and loading. Fixed loading date: 15.06.2026.Spindle 1: BottomSpindle 2: RightSpindle 3: LeftSpindle 4: TopSpindle 5: BottomThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
200 € 
