Fabricante:
(Categoria: 102)
chuck flange, flange holder, lathe chuck flange, driving flange, lathe chuck faceplate-Manufacturer: Röhm, chuck flange for three-jaw chuck, four-jaw chuck, faceplate-Type: 55021/22-6 Ø 220 mm-Bolt circle: Ø 134 mm-Hole: Short taper 6, cone Ø 103 - 106 mm-Dimensions total Ø 220 x 190 mm-Weight: 20.1 kg
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 220 mm-Inside: Ø 100 mm-Dimension: Ø 220 x 70 mm-Weight: 6.1 kg
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 193 mm-Inside: Ø 80 mm-Hole circle: Ø 105 mm-Dimension: Ø 193 x 75 mm-Weight: 4.1 kg
control: 840 C control: 2x 840 D : Kühlmittelsystem chip conveyor: ja kWgenerator - rated current: 95,00 Aconnected load: 65,00 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 210 mm-Inside: Ø 50 mm-Take: cone Ø 138 mm/short cone 8-Dimension: Ø 210 x 85 mm-Weight: 5 kg
Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 280 mm-Inside: Ø 105 mm-Take: cone Ø 138 mm/short cone 8-Dimension: Ø 280 x 35 mm-Weight: 13 kg
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 280 mm-Inside: Ø 142 - 145 mm-Dimension: Ø 280 x 45 mm-Weight: 13 kg
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks-Outside: Ø 280 mm-Inside: Ø 105 mm-Recording cone: 87 140 mm
Three-jaw chucks, three-jaw lathe chucks, power chucks-Chuck size: Ø 160 mm-6 set: clamping jaws-Weight: 17.5 kg
Guide track, guides, tool slide, cross table, cross slide, bed guide track, machine bed-Guide track: from Meuselwitz lathe-Measures: see drawing in the photos-Dimensions: 780/355 / H390 mm-Weight: 135 kg
Copy head, copy head, copy device, copy lathe for top support, top slide, dovetail guide, tool slide, cross table -Tool slide: from Meuselwitz lathe -Measurements: see photos -Dimensions: 760/340 / H200 mm -Weight: 87 kg
Three-jaw chucks, three-jaw lathe chucks, power chucks-Chuck size: Ø 200 mm-Short taper: 6-Weight: 25 kg
Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg
turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmturning diameter in the gap: 530 mmturning speeds: 65 - 1810 U/mincentre height: 205 mmspindle bore: 52 mmtailstock quill taper MT: 4 total power requirement: 2,2 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,3 mCenter lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe-Manufacturer: WMW, automatic lathe type DRT 50m-Turning length: 550 mm-Turning Ø over bed: 530 mm-Spindle bore: Ø 63 mm-Spindle speeds: 9 - 450 rpm-Three jaw chuck: Ø 200 mm-Turret: with accessories, see photos-Drive motor: 5.3 / 6.8 kW-Dimensions: 2420/1040 / H1460 mm-Weight: 2200 kg
Change gear, change gears, gear-Number of teeth: 152 pieces-Module: 1.25 mm-for splined shaft: Ø 25 mm
Change gear, change gears, gear-Number of teeth: 141 pieces-Module: 1.25 mm-for splined shaft: Ø 25 mm
: gefült mit 43 Aufnahmen altura: 2.200 mmlargura: 1.200 mmpeso da máquina ca.: 300 kg:
turning diameter over bed: 400 mmturning diameter over slide rest: 264 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 44 - 2000 U/mincentre height: 200 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 1,5 / 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 620 mmhollow: max. 400 mmweight of the machine ca.: 200 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKconnected load frequency: 230 Vbore capacity in steel: 16 mmthroat: 169 mmquill stroke: 50 mmturning speed range - drilling: 50 - 2250 U/minspindle drive: 0,5 kWtotal power requirement: 0,75 kWweight of the machine ca.: 0,175 tdimensions of the machine ca.: 1,3 x 0,65 x 1,3 m3-axis LCD digital display systemlongitudinal feed.3-jaw chuck 125 mm.4-way steel holder.chip tray, bulkheadHardened bed tracks.Emergency stop switch.lining protectionTool box, instruction manual.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A high-precision horizontal lathe WMZ in need of overhaul is available. Processes: Drilling, turning, milling, skiving, tool holder: VDI40, tool positions: 12, workpiece length range: 180mm-600mm, workpiece diameter range: 50mm-95mm, max. workpiece weight: 5kg, cycle time: 48min, control: Siemens 840D SL, operating hours: 15726h. Including cooling lubricant system Knoll KF 150-75, chip conveyor Knoll, air cleaner Mahle and hydraulic unit Hydac. The machine requires a complete overhaul. The machine components have been dismantled but are still present. Documentation available. On-site inspection is possible.
Um torno Wohlenberg antigo e desmontado está disponível. Largura do centro: 4000mm, diâmetro da placa facial: 900mm, comprimento: 6000mm, largura: 1000mm. É possível uma inspeção no local.
Diâmetro de giro: 420mm, comprimento de giro: 820mm, furo do eixo: 105mm, velocidade: 3000rpm, potência do eixo: 22kW, curso X / Z: 280mm/820mm, posições da ferramenta: 10, velocidade da ferramenta de acionamento: 6000rpm. Dimensões da máquina X/Y/Z: aprox. 4400mm/2100mm/2300mm, peso: aprox. 6000kg, controle: Mitsubishi M-720BM (MAPPS 2), horário de funcionamento: 10000h. Incluindo vários acessórios. As ferramentas acionadas nunca foram usadas, apenas o eixo Y foi executado. O braço de medição e o parafuso esférico do eixo Y são tão bons quanto novos. Documentação disponível. É possível uma inspeção no local.
Eixo X: 607mm, eixo z: 286mm, velocidade do eixo: máx. 6000/min, controle: Fanuc 32i A, comprimento: 1850mm, largura: 1750mm, altura: 1750mm, peso: 2.1t, horas de funcionamento: 14.841h. Com sistema de automação FMB Unirobot GP7-5Pkhs, fuso de moagem de fuso Jäger HF, mandril MicroCentric 4-410-3-QC, sistema de medição MARPOSS com compensação dimensional automatizada, filtro de névoa de óleo S400, filtro de correia Knoll KF110/500, transportador de correia articulado 320 S1 e outros acessórios. É possível uma inspeção no local.
Diâmetro de giro sobre a cama/escorregador transversal: 530mm/280mm, altura do centro: 264mm, largura do centro: 2000mm, largura da cama: 370mm, velocidade: 2000rpm, furo do eixo: 80mm, dimensões da haste da ferramenta X/Y: 25mm/25mm, curso da lâmina transversal: 300mm, diâmetro da pena: 65mm, curso da pena: 180mm, precisão de repetição: +/-0.008mm. A máquina tem um problema elétrico na cabeça da ferramenta. Documentação disponível. É possível uma inspeção no local.
Diâmetro de giro sobre a cama / face slide: 500mm/290mm, curso da face: 260mm, comprimento de giro: 1000mm, furo do eixo: 70mm, velocidade: 3050rpm, torque: 920Nm, passagem rápida X / Z: 8m / min / 10m / min, alimentação X / Z: 5m / min, curso da pena: 180mm, diâmetro da pena: 80mm. Dimensões da máquina X/Y/Z: aprox. 3400mm/2000mm/1850mm, peso: aprox. 3100kg. Documentação disponível. É possível uma inspeção no local.
Altura do centro: 180mm, largura do centro: 800mm, diâmetro de giro sobre a cama / face slide: 380mm/200mm, furo do eixo: 52mm, velocidade: 1500rpm, largura da cama: 330mm, curso da pena: 180mm, suporte da pena: MK4, dimensões da máquina X/Y/Z: aprox. 2000mm/850mm/1450mm, peso: aprox. 1050kg. É possível uma inspeção no local.
turning diameter: 320 mmturning height: 180 mmControl: SIEMENS 840 D chucking diameter: 315 mm0: 4.000 U/min: 1.000 / 280 mmrapid power traverse in X-and Z direction: 60/30 m/mintool turret with 12 work positions: VDI 50 total power requirement: 65 kWweight of the machine ca.: 13,5 tdimensions of the machine ca.: 5,5 x 3,2 x 3,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Com dois módulos de usinagem, eixo X: -50 a 725mm, eixo Y: -200 a 300/ -250 a 250mm, travessia rápida X-, Y-, eixo Z: 18/12/30m/min, comprimentos de giro: 1500/2000/2500/3200/4000/4500/6500mm, diâmetro de oscilação: 780/ 880mm, furo do eixo de giro: 92/123mm, faixa de velocidade do eixo principal: 0-3000/0-3000/2000/min, máx. Velocidade da unidade de torneamento/fresagem: 5000/6000/10000/min, comprimento máximo da ferramenta: 900/600/1000/300/900mm, curso da pena: 160/170mm, carga conectada: 102kVA, sistema de controle: SINUMERIK ONE / SINUMERIK 840D sl, controle do sistema de acionamento: SINAMICS S120, peso: 17t. É possível uma inspeção no local.
Christoph Busch GmbH
