Fabricante:
(Categoria: 102)
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 45-59 mm-Type name: 508x10-100x127 / 508x10-80x127-Dimensions total Ø 190 x 100 mm-Weight: 7.7 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø mm-Mounting: Hole shaft cone Ø 40-48 mm-Type designation: not available-Dimensions total Ø 180 x 85 mm-Weight: 6.8 kg
turning diameter: 400 mmswing diameter: 420 mmx-travel: 850 mmz-travel: 315 mmspindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mmturning speeds: max. 4000 U/mintool turret 12 times: C5 Captorapid traverse x + z axis: 45 / 30 m/minfeeding force: 11 kNtotal power requirement: 58 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 9,5 x 4,5 x 3 mHard turningDry machiningChip conveyorPromot Portal and CellmasterNo clamping device availableNo tools availableno Cellmaster accessories availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 600 mmturning diameter over slide rest: 400 mmturning length: 1500 mmA-Axis: 800 mmspindle bore: 80 mmspindle nose: A8 spindle motor: 7,5 kWreus: 11,5 - 2000 U/mintail stock: MK 5 quill stroke: 230 mmdiameter of quill: 90 mmfeed: längs 0,02 - 12 m/minfeed: quer 0,01 - 6 m/minthread - mm pitch: 0,25 - 120 mmthread - module: 0,0625 - 30 mmthread pitch -number: 80 Stücktotal power requirement: - kWweight of the machine ca.: 3000 tdimensions of the machine ca.: 2850 x 980 x 1330 mEquipment:- Coolant device- Machine light- Spindle guard- Rotating chuck guard- Interchangeable gears- 3-jaw chuck Ø 250mm- 3-axis digital readout DRO- travelling steady rest dia 15-200mm- 2 fixed steady rests dia 15-200mm & 180-340mm- CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible.
turning diameter over bed: 350 mmturning diameter over slide rest: 310 mmturning length: 700 mmtotal power requirement: 4,6 kWweight of the machine ca.: 1,0 tDimensions (HxWxD): 2.200 x 1.300 x 1.175 mm--> Technical data Centre height: 175 mm--> Centre width: 800 mm--> Swing diameter over bed: 350 mm--> Swing diameter over support: 310 mm--> Gap length in front of the faceplate: 145 mm--> Cross slide travel: 205 mm--> Top slide travel: 100 mm--> Tool cross-section: 20x20 mm--> Bed Width: 220 mm--> Height: 300 mm--> Headstock Spindle bore: 46 mm--> Spindle nose: DIN 55027-5--> Spindle inner taper: 1:20--> Tool holder: MK-3--> Spindle speeds: 18--> Speed range: 25 - 2000 rpm--> Tailstock Quill diameter: 50 mm--> Quill inner taper: MK-3--> Quill travel: 140 mm--> Lateral adjustment: 10 mm--> Feed range Number of feeds: 256--> Longitudinal feeds (128): 0.042 - 0.929 mm Rev--> Cross feed ...
turning diameter over bed: 330 mmturning diameter over slide rest: 190 mmcentre distance: 650 mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chucktool holder devicetail stock Technische Daten / technical details:Spitzenweite / center to center 650 mmDreh-Ø über Bett / turning diameter over bed 330 mmDreh-Ø über Schlitten / turning diameter over sledge 190 mmSpindelbohrung / spindle hole 36 mmDrehzahlbereich / spindle speed 30-2500 UpM /rpmAntriebsleistung / drive capacity 2,2 kWGewicht der Maschine ca. / weight ca. 600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 3.200 mmturning diameter: modified: 2.400 mmturning diameter over slide: 3.000 mmturning length: max. 15.000 mmcontrol: Sinumerik 840 D Siemensworkpiece weight: max. 80.000 kgwork accuracy: (up to) 0,01 mmMain spindle:: turning speed range - main spindle: max. 50 min/-1total power requirement: - kWweight of the machine ca.: 154,4 tdimensions of the machine ca.: 20,7 x 6,0 mDocuments: Heavy Duty LatheZERBST - DXP 5 / W15x15000- measurement precision: < 0,01 mmRetrofit 2009 / 2012:- 2009: Control system upgrade to Sinumerik 840D- 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technologyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible.
An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.
faceplate diameter: 2650 mmturning diameter over slide rest: 2800 mmturning diameter over plate: 3200 mmturning length: 10000 mmupper slide-adjustment: 250 mmspindle diameter in front bearing: 400 mmspindle turning speed range: 0,35 -1,12 / 1,2 - 56 U/minfeed: 0,05 - 18 mm/Uworkpiece weight: 9000 kgspindle motor: 60 kWmax. workpiece weight between centres: 20000 kgControl: total power requirement: - kWweight of the machine ca.: 93 tdimensions of the machine ca.: m- CNC control NUM 1060- 4-jaw face plate- Steel holder device- Tailstock- Base plate- Roller setting vice- Transverse travel of the top slide: 425 mm- Longitudinal displacement of the main slide in the centre section: 150 mm- Transverse displacement of the centre section on the lower section: 700mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC multi-spindle lathe Index overhauled in 2020 is available. Number of spindles: 6, max. bar capacity: 32mm, spindle speed: 6300rpm, weight: approx. 10800kg, control: Siemens Sinumerik. Bearing condition measurement 2024 HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. The machine has undergone extensive repairs to the spindles, cooling system, bearings, hydraulic lines, etc. Documentation available. Documentation available. On-site inspection is possible.
Torno CNC MAHO Graziano SPA GR 300 C Incluindo transportador de cavacos Incluindo documentação Dados técnicos e condição ver fotos
Largura da ponta: 430mm Altura da ponta: 120mm Furo do eixo: 23mm Velocidades do eixo: 60-3000 RPM Cabeça de fuso de contenção curta DIN 4 Tailstock MK2 Alimentações de 0,03 a 2,5 mm Peso aprox. 360 kg Novo display digital Aikron de 3 eixos, freio do motor do eixo renovado, tecnicamente verificado. Acessórios: Dispositivo Collet, mandril de torno Suporte de aço de mudança rápida
turning diameter: 800 mmturning length: 900 mmcontrol: Fanuc 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0460 mm: 270 mm: 1500 mm: 230 mm: 76 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: Meuser, lead screw lathe type M-IV-5 -Turning length: 3800 mm -Turning Ø over bed: 720 mm -Turning Ø over support: 440 mm -Spindle bore: Ø 95 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 400 mm -Tailstock mount: MK6 -Drive: 18 kW -Accessories: 1x steady rest, Multifix tool holder, tools see photos -Dimensions: 5930/1650/H1600 mm -Weight: 7500 kg
turning diameter: 1050 mmturning length: 3000 mmcontrol: OSP 300 SA-H travel -x axis: 1080 mmtravel -z axis: 3215 mmtravel -y axis: -330 +330 mmb-axis: -30 ~210 - 0,001 °spindle turning speed range: 14 - 1500 U/minspindle hollow: 185 mmpower capacity - milling spindle: 37 / 22 / 15 kWSpindle drive motor main spindle: 45 / 37 kWrapid travel x/y/z: 40 / 40 / 30 mm/minC-axis turning speed: 100 U/minmax. tool length: 600 mmmax. tool diameter: 135 / 300 mmmax. tool weight: 30 kgtotal power requirement: 81,3 kVAweight of the machine ca.: 43 todimensions of the machine ca.: 9,75x3,55x3,61 mEquipment:- CNC control Okuma OSP P 300 SA-H- NC tailstock- Milling spindle 40 - 10,000 rpm, 37/22/15 kW- Touch setter- Coolant through the spindle- Chip conveyor- Hydraulic steady rest SMW K6.1 (215 - 510 mm)- 3-jaw chuck 15’approx. 16920h switch-on hours and 9633h automatic operation and 7200h spindle h ...
Key data: 380 mm, 575 mm, 5000 1/min
Controlo G suave Curso X/Y/Z/W 230/100/625/575 milímetros Eixo principal Velocidade máxima 5.000 rpm Nariz do eixo principal A2-6 Velocidade máxima do subeixo 6.000 rpm Nariz do eixo subfuso A2-5 Torreta de ferramenta de 16 cavidades, VDI 16 estações de ferramentas acionadas de 5,5 kW Velocidade máxima ang. Ferramentas: 5.000 rpm Toolsetter Apanhador de peças Eixo C completo no eixo principal e no eixo do contador Interpolação de cilindros Sincronia. Toque Preparação Renishaw OMP Transportador Interface para alimentador de barras Bomba de alta pressão de 15 bar
turning diameter: 720 mmturning length: 3.000 mmcontrol: FAGOR 8055 TC/B turning diameter over bed: 470 mmspindle bore: 92 mmspindle nose: DIN-55027-11 spindle diameter: 150 mmspindle drive: 17 / 20,5 kWtotal power requirement: 28 kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feeds: 0 mm/minturning diameter over bed: 0 mmturning diameter over slide rest: 0 mm- Includes Grinding unit- Includes collets as shownThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ano de construção 2019 Controlo Celos com Siemens 840D sl Operar incluindo 21.5 ERGOline Control Viagens Eixo X: 490 mm Eixo Y: 250 mm Eixo Z: 1.300 mm Eixo B:+120 a -120 Diâmetro máximo de giro 500 milímetros Comprimento máximo de giro 1.200 milímetros Eixo principal ISM102 Potência de acionamento: 37/28 kW Binário máximo: 700/800 Nm Velocidade máxima do eixo: 4.000 rpm Passagem máxima da barra: 104 mm Sub-eixo ISM52 Potência de acionamento: 14,5 kW Velocidade máxima do eixo: 6.000 rpm Fuso de fresagem Potência de acionamento: 22 kW Velocidade máxima do eixo 12.000 rpm HSK-63A DIN69893 Revista de ferramentas 80 posições de ferramentas Outro equipamento Interface para robôs Balanças de vidro nos eixos X, Y e Z MP 1.0 – Controlo de Proteção de Máquinas Sondas de ferramentas Sonda de peça, BLUM TC60 Classific ...
Key data: 660 mm, 1495 mm
Matriz de Mazatrol Diâmetro Rotativo Máximo 660 milímetros Comprimento máximo de giro 1.495 milímetros Viagens Eixo X: 580 mm Eixo Y: 150 mm Eixo Z: 1.545 mm Eixo W: 1.490 mm Eixo B -30 a 210 Travessia rápida X/Y/Z/W 50/40/50/30 m/min Eixo principal Potência de acionamento: 22 kW Velocidade máxima do eixo 4.600 rpm Eixo C Passagem máxima da barra: 65 mm Sub-eixo Potência de acionamento: 18,5 kW Velocidade máxima do eixo 5.000 rpm Eixo C Fuso de fresagem Potência de acionamento: 18,5 kW Velocidade máxima do eixo: 12.000 rpm Eixo B: 0,0001 Capto C6 Revista de ferramentas / ATC 120 posições de ferramentas Diâmetro máximo da ferramenta: 90/125 mm Comprimento máximo da ferramenta: 300 mm Peso máximo da ferramenta: 10 kg Torreta inferior Torreta de tambor 9 estações de ferramentas 6 estações de ferramentas motorizadas ...
Key data: 750 mm, 1524 mm
Controlo Matriz de Mazatrol Diâmetro Rotativo Máximo 760 milímetros Comprimento máximo de giro 1.524 milímetros Viagens Eixo X: 630 mm Eixo Y: 230 mm Eixo Z: 1.585 mm Eixo W: 1.530 mm Eixo B -30 a 210 Travessia rápida X/Y/Z/W 50/40/50/30 m/min Eixo principal Potência de acionamento: 30 kW Velocidade máxima do eixo 3.300 rpm Eixo C Passagem máxima da barra: 102 mm Sub-eixo Potência de acionamento: 26kW Velocidade máxima do eixo 4.000 rpm Eixo C Fuso de fresagem Potência de acionamento: 18,5 kW Velocidade máxima do eixo: 12.000 rpm Eixo B: 0,0001 Capto C6 Revista de ferramentas / ATC 80 posições de ferramentas Diâmetro máximo da ferramenta: 90/125 mm Comprimento máximo da ferramenta: 400 mm Peso máximo da ferramenta: 10 kg Equipamento especial Arrefecimento pelo eixo Bomba de alta pressão 70 bar 20 l/min. PLC com 7 ...
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 45-58 mm-Type designation: 407x10-100x127 015 322 0020-Quantity: 1x mounting flange available-Dimensions total Ø 180 x 105 mm-Weight: 6.5 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 45-58 mm-Type designation: 407x10-100x127 015 322 0020-Number: 5x mounting flange available-Price: per piece-Dimensions total Ø 180 x 100 mm Weight: 7.1 kg/piece
turning diameter: 18 (16) mmturning length: - mmcontrol: Siemens spindle circle diameter: 180 mmbar feed: max. 80 mmlongitudinal slide -travel: 50 (63) mmcross slide - travel: 20 (32) mmSpindlespeed: 800 - 8.000 min/-1power capacity - main spindel: 11 kWTorque: 18 Nmdimensions of the machine ca.: 6,0 x 1,5 x 2,2 mweight of the machine ca.: 5,5 tDocuments: Chip conveyor: Coolantsystem: Parts removal: Signal-Light: bar feeder interface: bar feeder: IEMCA PRA 52 42 F hydraulic system: CNC-Bar-Automatic-Turning MachineSCHÜTTE - SG 18- Co2 fire extinguishing system Kraft&Bauer- Ruez scraper belt conveyor- IEMCA bar feeder PRA 52 42 F- Tool package- Curve package- various clamping devicesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 280 mmturning diameter over slide rest: 160 mmturning length: 500 mmcentre height: 140 mmcentre distance: 500 mmspindle bore: 36 mmspindle turning speed range: 15 - 3550 U/minspindle head: DIN 55022 Gr. 5 feeds - longitudinal: 0,008 - 0,560 mm/Ufeeds - cross: 0,004 - 0,280 mm/Uthread - mm pitch: 0,2 - 12 mmdia. of leadscrew: 24 mmlead of leadscrew: 6 mmtailstock taper MT: 3 tailstock quill stroke: 90 mmtailstock adjustment out of the central pos.: 15 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,6 tdimensions of machine L x W x H: 1,40 x 0,70 x 1,20 m- machine out of teaching shop -Accessories: DRO on 3 axis, 3-jaw chuck RÖHM 140 mmø, MULTIFIX-head AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1800 mmturning diameter over slide rest: 1450 mmturning length: 940 mmbed width: 1040 mmturning speeds: 2,35-118 U/minfaceplate diameter: 1400 mmturning dia. in gap: 2450 mmTravel: 1200 mmDistance between the canter 7000mmFaceplate diameter 1400urning diameter in the offset 2450, length 940 mmTravel over support 1200Over support with autom. travelThe tech. Data are manufacturer or operatorinformation and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward ...
turning diameter: 325 mmturning length: 1000 mmswing diameter over bed slide: 250 mmSwingdiameter in the bed bridge: 440 mmreus: 12 (85-2000) U/mintail stock: MK 3 quill stroke: 100 mmdiameter of quill: 40 mmspindle taper: DIN 55027 Nr. 5 spindle bore: 32 mmfeed: längs 0,006 - 1,77 m/minfeed: quer 0,003 - 0,885 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 770 kgdimensions of the machine ca.: 2150 x 950 x 1350 mmFurnishing:- Cooling device- Machine light- chip rear wall- Spindle protection- Lathe chuck protection- Tool holder protection- Foot pedal with braking function CE- Interchangeable gearsincl. Optional equipment- 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON- MULTIFIX quick-change holder type A, incl. 4 tool holders- 2-axis digital display DRO NewallThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kemmerich Werkzeugmaschinen GmbH
