Fabricante:
(Categoria: 102)
turning diameter over bed: 800 mmturning diameter over slide rest: 530 mmturning length: 3000 mmturning diameter in the slot: 850 mmcenter height over bed: 380 mmbed width: 550 mmspindle head: DIN 55022/8 spindle bore: 73 mmspeeds: 18 - 900 U/minfeeds: 224 / 0,018-10 mm/Uthread - mm pitch: ca. 84: 0,2 - 224 mmtotal power requirement: 17,5 kWweight of the machine ca.: 8,6 tdimensions of the machine ca.: 5,5 x 1,8 x 1,72 mCondition: ready for operation: Video(s) available on our website.: Electric 380 Volt: 3 jaw chuck: 500 mmFaceplate: 720 mmFaceplate: 500 mmRoll steady, fixed: 450 mmRoll steady, fixed: 250 mmTool holder system Multifix: Typ B Solid universal lathe with rapid longitudinal and transverse support traverse, pole-changing spindle motor (i.e., two speeds can be selected by increasing the motor speed), single-lever control for all support movements, pre-selected feed rates, ...
Controle Siemens 840D Diâmetro de giro 254 mm Comprimento de giro 500 mm Diâmetro do mandril 210 mm Comprimento de giro 410 mm Velocidade 4.500 min-1 Revólver de 8 velocidades Transportador
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 49-64 mm-Type designation: not available-Dimensions total Ø 210 x 125 mm-Weight: 10.9 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 163 mm-Mounting: Hole shaft cone Ø 44-54 mm-Type designation: not available-Dimensions total Ø 220 x 85 mm-Weight: 8 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 213 mm-Mounting: Hole shaft cone Ø 44-54 mm-Type designation: not available-Dimensions total Ø 230 x 85 mm-Weight: 10.3 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 30-39 mm-Type designation: not available-Dimensions total Ø 180 x 75 mm-Weight: 5.9 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 50-60 mm-Type designation: not available-Dimensions total Ø 180 x 90 mm-Weight: 8 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 213 mm-Mounting: Hole shaft cone Ø 56-59 mm-Type designation: not available-Dimensions total Ø 260 x 120 mm-Weight: 14.3 kg
Tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Swedturn, Type ST12 CNC 300 tool changer -Tool turret: for max. 12 tools -Tool holder: Ø 60 mm -Individual components: see photos -Dimensions: 565/470/H565 mm -Weight: 319 kg
Especificações: Fabricante: Weisser Tipo: Univertor AM-1L Ano de Marca: 2020 Controle: controle CNC Siemens SINUMERIK 840D sl Cursos: X 1.700 mm Z 500 mm Unidade de eixo do lado esquerdo da máquina Limite de velocidade | 3.500 rpm Velocidade nominal: 780 rpm Binário: 430/610 Nm (100/40% ED) Rolamento do eixo: 120 mm Flange do eixo: A8 de acordo com DIN 55026 Vestiário Velocidade máxima: 16.000 rpm Suporte do disco de curativo: 40 x 10 mm Revólver Torre-alvo: 12 velocidades Acionamento: acionamento giratório elétrico Eixo de moagem interno com software de moagem Suporte para ferramentas: D28/43 (rosca M28x2) Rolamento do eixo: 45 mm na versão híbrida Limite de velocidade: 45.000 rpm. Velocidade nominal: 30.000 rpm Potência de acionamento: 15/18 kw (100/60% ED) Torque| 4,7/5,7 Nm (100/60% CC) Eixo de moagem externo com software de moagem Cont ...
Controle Okuma OSP-P300 SA Diâmetro rotativo. [milímetro] 650 Comprimento de giro [mm] 1000 Eixo principal: Tecnologia de fusos motores Velocidade 4.200 rpm Potência 22 kW Binário 427 Nm Furo do eixo 91 mm Cilindro de fixação oco 86 mm Pacote de alta precisão C-Axis Chuck SMW KNCS-N 275-86 K8 Subfuso: Tecnologia de fusos motores Velocidade 5.000 rpm Potência 22 kW Binário 420 Nm Diâmetro do eixo 80 mm Cilindro de fixação oco 77 mm Pacote de alta precisão C-Axis Chuck SMW BHD-FC 210-52-3 Porta-ferramentas X/Y/Z/B: Tecnologia de fuso de fresagem Velocidade 12.000 rpm Potência 22 kW Binário 120 Nm Porta-ferramentas HSK 63 Eixo Y 250 mm (+/- 125 mm) Eixo B 240 Revista da ferramenta: Número de estações: 80 Equipamentos / Acessórios: Sistemas de medição de deslocamento diretamente no eixo X/Y/Z (balanças de vidro) Transportador de ca ...
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø mm-Mounting: Hole shaft cone Ø 38-48 mm-Type designation: not available-Dimensions total Ø 180 x 85 mm-Weight: 7,3 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø mm-Mounting: Hole shaft cone Ø 46-59 mm / M50-Type designation: not available-Dimensions total Ø 180 x 80 mm-Weight: 7,1 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø mm-Mounting: Hole shaft cone Ø 34-43 mm / M50-Type designation: not available-Dimensions total Ø 180 x 80 mm-Weight: 7 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø mm-Mounting: Hole shaft cone Ø 38-49 mm-Type designation: not available-Dimensions total Ø 180 x 85 mm-Weight: 6.6 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 45-59 mm-Type name: 508x10-100x127 / 508x10-80x127-Dimensions total Ø 190 x 100 mm-Weight: 7.7 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø mm-Mounting: Hole shaft cone Ø 40-48 mm-Type designation: not available-Dimensions total Ø 180 x 85 mm-Weight: 6.8 kg
turning diameter: 400 mmswing diameter: 420 mmx-travel: 850 mmz-travel: 315 mmspindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mmturning speeds: max. 4000 U/mintool turret 12 times: C5 Captorapid traverse x + z axis: 45 / 30 m/minfeeding force: 11 kNtotal power requirement: 58 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 9,5 x 4,5 x 3 mHard turningDry machiningChip conveyorPromot Portal and CellmasterNo clamping device availableNo tools availableno Cellmaster accessories availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 600 mmturning diameter over slide rest: 400 mmturning length: 1500 mmA-Axis: 800 mmspindle bore: 80 mmspindle nose: A8 spindle motor: 7,5 kWreus: 11,5 - 2000 U/mintail stock: MK 5 quill stroke: 230 mmdiameter of quill: 90 mmfeed: längs 0,02 - 12 m/minfeed: quer 0,01 - 6 m/minthread - mm pitch: 0,25 - 120 mmthread - module: 0,0625 - 30 mmthread pitch -number: 80 Stücktotal power requirement: - kWweight of the machine ca.: 3000 tdimensions of the machine ca.: 2850 x 980 x 1330 mEquipment:- Coolant device- Machine light- Spindle guard- Rotating chuck guard- Interchangeable gears- 3-jaw chuck Ø 250mm- 3-axis digital readout DRO- travelling steady rest dia 15-200mm- 2 fixed steady rests dia 15-200mm & 180-340mm- CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible.
turning diameter over bed: 350 mmturning diameter over slide rest: 310 mmturning length: 700 mmtotal power requirement: 4,6 kWweight of the machine ca.: 1,0 tDimensions (HxWxD): 2.200 x 1.300 x 1.175 mm--> Technical data Centre height: 175 mm--> Centre width: 800 mm--> Swing diameter over bed: 350 mm--> Swing diameter over support: 310 mm--> Gap length in front of the faceplate: 145 mm--> Cross slide travel: 205 mm--> Top slide travel: 100 mm--> Tool cross-section: 20x20 mm--> Bed Width: 220 mm--> Height: 300 mm--> Headstock Spindle bore: 46 mm--> Spindle nose: DIN 55027-5--> Spindle inner taper: 1:20--> Tool holder: MK-3--> Spindle speeds: 18--> Speed range: 25 - 2000 rpm--> Tailstock Quill diameter: 50 mm--> Quill inner taper: MK-3--> Quill travel: 140 mm--> Lateral adjustment: 10 mm--> Feed range Number of feeds: 256--> Longitudinal feeds (128): 0.042 - 0.929 mm Rev--> Cross feed ...
turning diameter over bed: 330 mmturning diameter over slide rest: 190 mmcentre distance: 650 mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chucktool holder devicetail stock Technische Daten / technical details:Spitzenweite / center to center 650 mmDreh-Ø über Bett / turning diameter over bed 330 mmDreh-Ø über Schlitten / turning diameter over sledge 190 mmSpindelbohrung / spindle hole 36 mmDrehzahlbereich / spindle speed 30-2500 UpM /rpmAntriebsleistung / drive capacity 2,2 kWGewicht der Maschine ca. / weight ca. 600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 3.200 mmturning diameter: modified: 2.400 mmturning diameter over slide: 3.000 mmturning length: max. 15.000 mmcontrol: Sinumerik 840 D Siemensworkpiece weight: max. 80.000 kgwork accuracy: (up to) 0,01 mmMain spindle:: turning speed range - main spindle: max. 50 min/-1total power requirement: - kWweight of the machine ca.: 154,4 tdimensions of the machine ca.: 20,7 x 6,0 mDocuments: Heavy Duty LatheZERBST - DXP 5 / W15x15000- measurement precision: < 0,01 mmRetrofit 2009 / 2012:- 2009: Control system upgrade to Sinumerik 840D- 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technologyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible.
An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.
faceplate diameter: 2650 mmturning diameter over slide rest: 2800 mmturning diameter over plate: 3200 mmturning length: 10000 mmupper slide-adjustment: 250 mmspindle diameter in front bearing: 400 mmspindle turning speed range: 0,35 -1,12 / 1,2 - 56 U/minfeed: 0,05 - 18 mm/Uworkpiece weight: 9000 kgspindle motor: 60 kWmax. workpiece weight between centres: 20000 kgControl: total power requirement: - kWweight of the machine ca.: 93 tdimensions of the machine ca.: m- CNC control NUM 1060- 4-jaw face plate- Steel holder device- Tailstock- Base plate- Roller setting vice- Transverse travel of the top slide: 425 mm- Longitudinal displacement of the main slide in the centre section: 150 mm- Transverse displacement of the centre section on the lower section: 700mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC multi-spindle lathe Index overhauled in 2020 is available. Number of spindles: 6, max. bar capacity: 32mm, spindle speed: 6300rpm, weight: approx. 10800kg, control: Siemens Sinumerik. Bearing condition measurement 2024 HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. The machine has undergone extensive repairs to the spindles, cooling system, bearings, hydraulic lines, etc. Documentation available. Documentation available. On-site inspection is possible.
Torno CNC MAHO Graziano SPA GR 300 C Incluindo transportador de cavacos Incluindo documentação Dados técnicos e condição ver fotos
Largura da ponta: 430mm Altura da ponta: 120mm Furo do eixo: 23mm Velocidades do eixo: 60-3000 RPM Cabeça de fuso de contenção curta DIN 4 Tailstock MK2 Alimentações de 0,03 a 2,5 mm Peso aprox. 360 kg Novo display digital Aikron de 3 eixos, freio do motor do eixo renovado, tecnicamente verificado. Acessórios: Dispositivo Collet, mandril de torno Suporte de aço de mudança rápida
turning diameter: 800 mmturning length: 900 mmcontrol: Fanuc 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Plum & Partner Werkzeugmaschinen GmbH
