Fabricante:
(Categoria: 102)
turning diameter: max. 2.800 mmdiameter of spindle flange: 1.100 mmmax. swing diameter: 3.000 mmcontrol: 840 D sl SiemensMain spindle:: turning speed range - main spindle: max. 230 min/-1power capacity - main spindel: 206 kWmax. Torque: 53.000 Nmmax. load: - kgC-Axis: Tool Mount:: Rechts / Righttool taper: Capto C8 swivellable: B: 0 - 270 °Spindle speed - driven tool pos.: max. 6.000 min -1max. Torque: 120 NmTool Mount:: Links / Lefttool taper: Capto C8 tool magazin:: Rechts / Rightnumber of toolpositions: 41 pos.max. tool weight: 20 kgmax. tool length: 400 mmworkpiece diameter at full load: 150 mmtool taper: Capto C8 tool magazin:: Links / Leftnumber of toolpositions: 25 pos.workpiece diameter at full load: 150 mmmax. tool weight: 20 kgmax. tool length: 400 mmtool taper: Capto C8 axis stroke:: x-axis: 1: 2.700 mmx-axis: 2: 2.700 mmz-axis: ((((2x 1.000 mmfeeds:: rapid traverse: ...
Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible.
Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible.
Precision lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: WEILER, lead screw lathe type commodor 42 -Turning length: 900 mm -Turning Ø over bed: 400 -Turning Ø over support: 190 mm -Spindle bore: Ø 56 mm -Spindle speeds: 45 - 2000 rpm -Three-jaw chuck: Röhm Ø 200 mm -Four-jaw chuck: Röhm Ø 200 mm -Tailstock mount: MK3 -Drive: 4 kW -Accessories: 18x Multifix tool holder with rotating center see photos -Lathe dimensions: 2200/1300/H1410 mm -Weight of lathe: 1380 kg
Especificações: Espaço de trabalho: Diâmetro circunferencial máximo: 680 mm Diâmetro circunferencial via X-guide: 565 mm Diâmetro do manco: 250 / 315 mm Curso plano (X): 315 mm Curso longitudinal (Y): 1350 mm Caixa do eixo: Diâmetro do eixo no rolamento dianteiro: 150 mm Furo do eixo: 107 mm Unidade principal: Potência do acionamento principal trifásico: 36 / 45 kW Binário (100% ED / 40% ED): 600 / 750 Nm Faixa de velocidade (100% ED): 20 - 3200 rpm Faixa de velocidade (40% ED): 20 - 4000 rpm Porta-ferramentas: Número de estações de ferramentas: 12 Diâmetro cilíndrico da haste: 50 mm Tempo de comutação 30: 0,16 seg. Tailstock: Material traseiro, curso: 1200 mm Curso da quila: 120 mm Diâmetro da quilra: 120 mm Suporte para quilinhos: MK 5 Instalação de refrigerante: Conteúdo: aprox. 220 l Potência da bomba: 1,7 kW Caudal a 6 bar: ...
- Passagem da barra: 20 mm - Comprimento giratório: 160 mm - Velocidade: 6.500 rpm - Dispositivo de colheita para peças longas - 4 Ferramentas fixas - 3 Ferramentas motorizadas - 1 suporte de berbequim - Dimensões da máquina CxLxA: 2600 x 1200 x 1700 mm - Peso da máquina: 2100 kg - Carregando revista Iemca MiniBoss 325 CNC
turning length: 2000 mmcentre height: 330 mmswing diameter over bed slide: 660 mmswing diameter over slide rest: 460 mmturning dia. in gap: 900 mmspindle bore: 105 mmturning speeds: 25 - 1600 U/minbed width: 400 mmspindle taper: 55029 D 1-8taper in tailstock: 5 MKquill travel: 235 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2900 kg.range L-W-H: 3630 x 1200 x 1520 mmScope of delivery :- 3-axis digital display ES-12 V with LCD display- Slip clutch- Rapid traverse longitudinally and flatly- LED machine light- 3-jaw chuck PS3-315 mm / D8- Clamping disk 450 mm- Fixed bezel - Passage diam. max. 180 mm- Revolving bezel - Passage diam. max. 120mm- 2 centering points- Motor with magnetic brake according to CE standards- Foot pedal with braking function according to CE- Initial filling with Shell Tellus 46- Coolant device- Quick-change tool holder with 4 inserts- Protective device ...
turning length: 3000 mmturning diameter: 660 mmturning dia. in gap: 900 mmturning diameter over slide: 460 mmturning speeds: 25 - 1600 U/minquill:: 5 MKquill travel: 235 mmspindle bore: 105,0 mmengine output: 7,5 kWspindle taper: DIN 55029 D 1-8weight of the machine ca.: 3.300 kg.dimensions: 4.630 x 1.200 x 1.529 mmScope of delivery- 3-axis digital display ES-12 V with LCD display- Slip clutch- Rapid traverse longitudinal and planar- LED machine light- 3-jaw steel chuck PO3-315 mm / D8- Clamping disk 450 mm- Fixed steady rest - passage diameter max. 180 mm- Follow-on steady rest - passage diameter max. 120 mm- 2 centering points- Motor with magnetic brake in accordance with CE standard- Foot pedal with brake function in accordance with CE- Initial filling with Shell Tellus 46- Coolant system- Quick-change tool holder with 4 inserts- Protective device for quick-change tool holder- Change ...
turning length: 1000 mmturning diameter: 460 mmswing diameter over bed slide: 270 mmturning dia. in gap: 690 mmspindle bore: 80.0 mmturning speeds: 25 - 1700 U/minbed width: 300 mmspindle taper: DIN 55029 D 1-8taper in tailstock: 4 MKquill travel: 130 mmtotal power requirement: 5.5 kWweight of the machine ca.: 1675 kg.range L-W-H: 2300 x 1080 x 1600 mmScope of delivery:- 3-axis digital display ES-12 V with LCD display- 3-jaw chuck PS3-250 mm / D8- Clamping disk 450 mm- Coolant system- Initial filling with Shell Tellus 46- Fixed steady rest - passage diameter max. 150 mm- Follow-on steady rest - passage diameter max. 110 mm- Quick-change tool holder with 4 inserts- Protective device for quick-change tool holder- Motor with magnetic brake according to CE standard- Foot pedal with brake function according to CE- Slip clutch- Rapid traverse lengthwise and facewise- Change gears- 2 centering ...
turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned partsEquipment:- robust lead/pull spindle lathe- KLOPFER four-jaw chuck Ø 140 mm- KLOPFER three-jaw chuck Ø 140 mm- collet holder with lots of collets- foldable lathe chuck guard- chuck key- MULTIFIX steel holder A, with 3x new inserts- movable tailstock- adjustable bed stop- control panel, front left- automatic feeds for face and top support- pole-changing drive motor- machine base frame, with cab ...
turning length: 800 mmturning diameter: 280 mmturning diameter over slide rest: 150 mmspindle bore: 42.0 mmtailstock quill taper MT: 3 MKbed width: 208 mmturning speeds: 42 - 2022 U/minspindle taper: DIN 55027/5 quill stroke: 90.0 mmvoltage: 380 Vtotal power requirement: 3.0 kWweight of the machine ca.: 750 kgrange L-W-H: 1800 x 800 x 1250 mmDue to its design (type, performance, feed rates, etc.) it can be usedsuccessfully in training workshops, but also for toolmaking and repair shops.Equipment:- robust conventional lead/spindle lathe- WMW 3-jaw chuck Ø 150 mm- faceplate 280 mm- MULTIFIX quick-change holder, with insert- movable tailstock- chuck key- machine base with storage area- pole-changing drive motor- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 750 mmturning diameter: 310 mmturning diameter over slide rest: 175 mmspindle bore: 32.0 mmtailstock quill taper MT: 3 MKturning speeds: 85 - 2200 U/minbed width: 200 mmspindle taper: DIN 55027 GR 5 total power requirement: 2.2 kWweight of the machine ca.: 710 kgrange L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college ()- in checked condition - machine videos -https://www.youtube.com/watch?v=iqU7Bkh6INohttps://www.youtube.com/wa tch?v=aSViqjk51IkFurnishing:- Robust conventional center lathe- 3-jaw lathe chuck Ø 160 mm, with replacement jaws- NEWALL digital display, front left- MULTIFIX steel holder with 4x inserts- fixed bezel- moving bezel- Movable tailstock- Foot/spindle brake- Machine swing feet- User manual (PDF/NL) all technical data:- Turning diameter over bed 310 mm- Distance between centers 750 mm- Turning diameter over support 175 mm- ...
turning length: 3000 mmturning diameter: 800 mmturning dia. in gap: 1000 mmturning diameter over slide: 540 mmturning speeds: 25 - 1600 U/minquill:: 5 MKquill travel: 235 mmspindle bore: 105,0 mmengine output: 7,5 kWspindle taper: DIN 55029 D 1-8weight of the machine ca.: 3820 kg.dimensions: 4800 x 1320 x 1580 mmScope of delivery- 3-axis digital display ES-12 V with LCD display- Cable routing via energy chain- 3-jaw chuck PS3-315 mm / D8- Clamping disc 500 mm- Fixed steady rest - passage diameter max. 180 mm- Follow-on steady rest - passage diameter max. 100 mm- 2 centering points- Motor with magnetic brake in accordance with CE standard- Foot pedal with brake function in accordance with CE- Initial filling with Shell Tellus 46- Rapid traverse lengthwise and facewise- Slip clutch- Coolant system- Quick-change tool holder with 4 inserts- Protective device for quick-change tool holder- LED ...
turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned partsEquipment:- robust lead/pull spindle lathe- KLOPFER four-jaw chuck Ø 140 mm- collet holder with lots of collets- chuck key- MULTIFIX steel holder A, with 3x new inserts- movable tailstock- adjustable bed stop- control panel, front left- automatic feeds for face and top support- pole-changing drive motor- machine base frame, with cabinet door (storage area)- chip splash guard rear wallThe data f ...
turning length: 1000 mmturning diameter: 360 mmturning dia. in gap: 480 mmspindle bore: 51,0 mmturning speeds: 70 - 2000 U/minbed width: 185 mmspindle taper: 55029 D 1-5taper in tailstock: 4 MKquill travel: 110 mmtotal power requirement: 1,5 kWweight of the machine ca.: 540 kg.range L-W-H: 1920 x 750 x 1600 mmEquipment:- 3-axis digital display i200 with LCD display- 3-jaw chuck DK11-200 mm / D5- Faceplate 200 mm / D5, according to DIN 55029- Fixed steady rest - passage diameter max. 70 mm- Follow-on steady rest - passage diameter max. 50 mm- Coolant system- Initial filling with Shell Tellus 46- Extendable chip tray- Clamping disk 320 mm- Quadruple tool holder- Protective device for quadruple tool holder- Slip clutch- Micrometer longitudinal stop- Thread gauge- LED machine light- Reducing sleeve- Change gears- 2 centering points- Foot pedal with brake function according to CE- Motor with ...
turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned partsEquipment:- robust lead/pull spindle lathe- KLOPFER four-jaw chuck Ø 140 mm- collet holder with lots of collets- foldable lathe chuck guard- chuck key- MULTIFIX steel holder A, with 3x new inserts- movable tailstock- adjustable bed stop- control panel, front left- automatic feeds for face and top support- pole-changing drive motor- machine base frame, with cabinet door (storage area)- chip spla ...
turning length: 1000 mmturning diameter: 420 mmswing diameter over bed slide: 255 mmturning dia. in gap: 580 mmspindle bore: 52.0 mmturning speeds: 30-550 / 550-3000 U/minbed width: 250 mmspindle taper: 55029 D 1-6taper in tailstock: 4 MKquill travel: 140 mmtotal power requirement: 5.5 kWweight of the machine ca.: 1145 kg.range L-W-H: 2090 x 1050 x 1600 mmScope of delivery- 3-axis digital display ES-12 V with LCD display- 3-jaw steel chuck PO3-200 mm / D6- Clamping disk 350 mm- Fixed steady rest - passage diameter max. 135 mm- Follow-on steady rest - passage diameter max. 65 mm- Foot pedal with brake function according to CE- Quadruple tool holder- Protective device for quadruple tool holder- Micrometer longitudinal stop- Turret stop with fine adjustment- Frequency converter- Initial filling with Shell Tellus 46- Coolant system- Slip clutch- Thread gauge- LED machine light- Change gears- ...
turning length: 1000 mmturning diameter: 400 mmturning dia. in gap: 560 mmspindle bore: 52,0 mmturning speeds: 45 - 2.000 U/minbed width: 210 mmspindle taper: 55029 D 1-5taper in tailstock: 4 MKquill travel: 100 mmtotal power requirement: 2,0 / 2,4 kWweight of the machine ca.: 810 kg.range L-W-H: 1.890x800x1.600 mmEquipment:- 3-axis digital display i200 with LCD display- 3-jaw chuck DK11-200 mm / D5- Faceplate 200 mm / D5, according to DIN 55029- Fixed steady rest - passage diameter max. 90 mm- Follow-on steady rest - passage diameter max. 70 mm- Coolant system- Initial filling with Shell Tellus 46- Extendable chip tray- Clamping disk 320 mm- Quadruple tool holder- Protective device for quadruple tool holder- Slip clutch- Micrometer longitudinal stop- Thread gauge- LED machine light- Reducing sleeve- Change gears- 2 centering points- Foot pedal with brake function according to CE- Motor ...
turning length: 1000 mmturning diameter: 380 mmturning dia. in gap: 490 mmspindle bore: 51,0 mmturning speeds: 70 - 2000 U/minbed width: 185 mmspindle taper: 55029 D 1-5taper in tailstock: 4 MKquill travel: 120 mmtotal power requirement: 1,5 / 2,2 kWweight of the machine ca.: 575 kg.range L-W-H: 1920 x 800 x 1660 mmEquipment:- 3-axis digital display i200 with LCD display- 3-jaw chuck DK11-200 mm / D5- Faceplate 200 mm / D5, according to DIN 55029- Fixed steady rest - passage diameter max. 70 mm- Follow-on steady rest - passage diameter max. 50 mm- Coolant system- Initial filling with Shell Tellus 46- Extendable chip tray- Clamping disc 320 mm- Quadruple tool holder- Protective device for quadruple tool holder- Slip clutch- Micrometer longitudinal stop- Thread gauge- LED machine light- Reducing sleeve- Change gears- 2 centering points- Foot pedal with brake function according to CE- Motor ...
turning length: 2000 mmturning diameter: 560 mmturning diameter over slide: 350 mmturning speeds: 25 - 1500 U/minswing diameter over bed slide: 350 mmturning dia. in gap: 785 mmquill travel: 180 mmquill:: 5 MKspindle bore: 105 mmengine output: 7,5 kWspindle taper: DIN 55029 D 1-8weight of the machine ca.: 2720 kg.Equipment:- 3-axis digital display ES-12 V with LCD display- 3-jaw chuck PS3-315 mm / D8- Clamping disc 450 mm- Fixed steady rest - passage diameter max. 180 mm- Follow-on steady rest - passage diameter max. 120 mm- 2 centering points- Initial filling with Shell Tellus 46- Motor with magnetic brake in accordance with CE standard- Foot pedal with brake function in accordance with CE- Coolant system- Quick-change tool holder with 4 inserts- Protective device for quick-change tool holder- Slip clutch- LED machine light- Change gears- Reduction sleeve- Chip back wall- Operating tool ...
turning length: 1000 mmturning diameter: 350 mmturning dia. in gap: 450 mmspindle bore: 40,0 mmturning speeds: 70 - 2000 U/minbed width: 180 mmspindle taper: 55029 D 1-4taper in tailstock: 3 MKquill travel: 110 mmtotal power requirement: 1,5 kWweight of the machine ca.: 529 kg.range L-W-H: 1730x700x1340 mmScope of delivery:- 3-axis digital display i200 with LCD display- 3-jaw chuck DK11-160 mm / D4- Face plate 200 mm / D4, according to DIN 55029- Fixed steady rest - passage diameter max. 60 mm- Follow-on steady rest - passage diameter max. 60 mm- Clamping plate 250 mm- Quadruple tool holder- Shaft fixing device- Protection device for tool holder- Slip clutch- Micrometer longitudinal stop- Coolant device- Extendable chip tray- Frequency converter- Foot pedal with brake function according to CE- Splash guard- Thread gauge- LED machine light- Digital speed display- Reducing sleeve- Change g ...
turning length: 750 mmturning diameter: 310 mmturning diameter over slide rest: 175 mmspindle bore: 32,0 mmtailstock quill taper MT: 3 MKturning speeds: 85 - 2200 U/minbed width: 200 mmtotal power requirement: 2.2 kWweight of the machine ca.: 710 kgrange L-W-H: 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop ()Furnishing:- Spindle speed continuously adjustable in 2x switching stages- TOS 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key- NEWALL digital display, front left- MULTIFIX steel holder with inserts- Movable tailstock- live center, incl. quick-action drill chuck- digital speed display- Change gears- Foot/spindle brake all technical data:- Turning diameter over bed 310 mm- Distance between centers 750 mm- Spindle bore 32 mm- Turning diameter over cross slide 175 mm- bed width 200 mm- Spindle mount / DIN55027 5- Spindle taper 4.5 M- Spindle speed infin ...
turning length: 600 mmturning diameter over bed: 360 mmturning diameter over slide rest: 190 mmbed width: 295 mmnumber of spindle speeds: 45 - 2240 U/min.spindle bore: 33,0 mmtailstock quill taper MT: MK 3 feed: Längs 0,02-0,8 mm/Ufeed: Quer 0,0125-0,5 mm/Utotal power requirement: 5,5 kWweight of the machine ca.: 1900 kgrange L-W-H: 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 eurosFurnishing:- WNW NILES 3-jaw chuck Ø 200 mm- Multifix steel holder size B with inserts- revolving center points- chuck key- Movable tailstock- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center height: 230mm, turning diameter over bed/cross slide: 460mm/270mm, spindle bore: 62mm, distance between centers: 1000mm, threading range inch: 4-80 TPI. The machine has been retrofitted with a digital display. An on-site inspection is possible.
turning length: 850 mmturning diameter: 400 mmswing diameter over bed slide: 245 mmspindle bore: 52.0 mmturning speeds: 45 - 1800 U/minbed width: 260 mmspindle taper: DIN 55029 D 1-5taper in tailstock: 3 MKquill travel: 120 mmtotal power requirement: 3.0 / 4.5 kWweight of the machine ca.: 1255 kgrange L-W-H: 1900 x 1000 x 1610 mmEquipment:- 3-axis digital display ES-12 V with LCD display- 3-jaw chuck PS3-200 mm / D5- Clamping disk 320 mm- Fixed steady rest - passage diameter max. 130 mm- Follow-on steady rest - passage diameter max. 100 mm- Coolant system- Quick-change tool holder with 4 inserts- Protective device for quick-change tool holder- Micrometer longitudinal stop- Slip clutch- Motor with magnetic brake in accordance with CE standard- Initial filling with Shell Tellus 46- Extendable chip tray- LED machine light- Change gears- Reduction sleeve- 2 centering points- Chip rear wall- ...
turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned partsEquipment:- robust lead/pull spindle lathe- KLOPFER four-jaw chuck Ø 140 mm- KLOPFER three-jaw chuck Ø 140 mm- collet holder with lots of collets- foldable lathe chuck guard- chuck key- MULTIFIX steel holder A, with 3x new inserts- movable tailstock- adjustable bed stop- control panel, front left- automatic feeds for face and top support- pole-changing drive motor- machine base frame, with cab ...
turning length: 1500 mmturning diameter: 420 mmswing diameter over bed slide: 255 mmturning dia. in gap: 580 mmspindle bore: 52.0 mmturning speeds: 45 - 1800 U/minbed width: 250 mmspindle taper: DIN 55029 D 1-6taper in tailstock: 4 MKquill travel: 140 mmtotal power requirement: 3.0 / 4.5 kWweight of the machine ca.: 1400 kgrange L-W-H: 2570 x 900 x 1600 mmEquipment:- 3-axis digital display ES-12 V with LCD display- 3-jaw chuck DK11-200 mm / D6- Clamping disk 350 mm- Fixed steady rest - passage diameter max. 135 mm- Follow-on steady rest - passage diameter max. 65 mm- Coolant system- Quadruple tool holder- Protective device for quadruple tool holder- Micrometer longitudinal stop- Slip clutch- Turret stop with fine adjustment- Thread gauge- Motor with magnetic brake according to CE standard- Foot pedal with brake function according to CE- Initial filling with Shell Tellus 46- LED machine l ...
turning length: 1500 mmturning diameter: 460 mmswing diameter over bed slide: 270 mmturning dia. in gap: 690 mmspindle bore: 80.0 mmturning speeds: 25 - 1700 U/minbed width: 300 mmspindle taper: DIN 55029 D 1-8taper in tailstock: 4 MKquill travel: 130 mmtotal power requirement: 5.5 kWweight of the machine ca.: 1845 kg.range L-W-H: 2750 x 1080 x 1600 mmScope of delivery:- 3-axis digital display ES-12 V with LCD display- 3-jaw chuck PS3-250 mm / D8- Clamping disk 450 mm- Coolant system- Initial filling with Shell Tellus 46- Fixed steady rest - passage diameter max. 150 mm- Follow-on steady rest - passage diameter max. 110 mm- Quick-change tool holder with 4 inserts- Protective device for quick-change tool holder- Motor with magnetic brake according to CE standard- Foot pedal with brake function according to CE- Slip clutch- Rapid traverse lengthwise and facewise- Change gears- 2 centering ...
turning length: 1500 mmturning diameter: 560 mmturning diameter over slide: 350 mmturning speeds: 25-220/220-1500 U/minswing diameter over bed slide: 350 mmturning dia. in gap: 785 mmquill travel: 185 mmspindle bore: 105,0 mmengine output: 7,5 kWspindle taper: DIN 55029 D 1-8quill:: 5 MKweight of the machine ca.: 2420 kg.range L-W-H: 2840 x 1150 x 1610 mmEquipment:- 3-axis digital display ES-12 V with LCD display- 3-jaw chuck PS3-315 mm / D8- Fixed steady rest - passage diameter max. 180 mm- Follow-on steady rest - passage diameter max. 120 mm- Foot pedal with brake function according to CE- Protective device for quick-change tool holder- LED machine light- Initial filling with Shell Tellus 46- Clamping disk 450 mm- 2 centering points- Frequency converter- Digital speed display- Slip clutch- Rapid traverse longitudinal and planar- Coolant system- Quick-change tool holder with 4 inserts- ...
turning length: 3000 mmturning diameter: 660 mmturning dia. in gap: 870 mmturning diameter over slide: 420 mmturning speeds: 36 - 1600 U/minquill:: 5 MKquill travel: 150 mmspindle bore: 105,0 mmengine output: 7,5 kWspindle taper: DIN 55029 D 1-8weight of the machine ca.: 3990 kg.dimensions: 4500 x 1280 x 1650 mmScope of delivery- Slip clutch- Rapid traverse longitudinal and planar- LED machine light- 3-axis digital display ES-12 V with LCD display- 3-jaw chuck PS3-315 mm / D8- Clamping disk 630 mm- Fixed steady rest - passage diameter max. 250 mm- Follow-on steady rest - passage diameter max. 110 mm- 1 centering point / 1 follow-on punch point- Motor with magnetic brake in accordance with CE standard- Foot pedal with brake function in accordance with CE- Initial filling with Shell Tellus 46- Coolant system- Quick-change tool holder with 4 inserts- Protective device for quick-change tool ...
Stiens Werkzeugmaschinenhandelsgesellschaft mbH
