subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 109)
length: 1300 mmwidth: 1100 mmweight of the machine ca.: 1.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC vertical machining center Type: MAG CFV-1300i Manufacturer: Cincinnati Year: 2010 Control: Heidenhain TNC 530 X: 1300 mm Y: 540 mm Z: 720 mm Maximum table load: 1000 kg Max spindle speed: 9000 rpm Tool magazine: 24 positions Internal cooling Chip conveyor 4 pcs hydraulic vices Tool holders SK40 approx. 24 pcs New spindle In good condition, under power Find more here - / Contact us at -
his Mazak VCN 510C is a vertical machining center manufactured in 2003, designed for precision 3-axis machining operations. It features a robust construction with a machine weight of approximately 6000 kg, ensuring stability during high-speed machining. Technical data Travel distances: X 1050 mm / Y 500 mm / Z 500 mm Spindle: 12,000 min⁻¹, SK40 Tool magazine: 30 positions Control: Fusion Table size: approx. 1300 × 550 mm Cooling: 15 bar IK Machine weight: approx. 6,000 kg Machine is in daily use, ready for immediate operation Chip conveyor IKZ Documentation available Find more here - / Contact us at -
Manufacturer: Tornos Model: Deco 10 +LNS Year of Manufacture: 1999-2010 Find more here - / Contact us at -
CNC vertical machining center Type: Vesta-1000 Manufacturer: Hwacheon Year: 2016 Control: Fanuc Series 0i-MD X: 1000 mm Y: 550 mm Z: 500 mm Distance table-spindle: 130 – 630 mm Working surface: 1100 × 502 mm Table load capacity: 700 kg Spindle speed: 12000 rpm Rapid traverse (X / Y / Z) m/min 36 / 36 / 30 Working feed (X / Y / Z) mm/min 1 – 24,000 Feed motor (X / Y / Z) kW 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Tool changer: 24 positions Cooling through the center of the tool 30 bar Power consumption: 30 kVA Coolant tank capacity: 380 l Chip conveyor 4th axis TSUDAKOMA Wireless workpiece probe + tool probe. Dimensions:3335 × 2200 x 2670 mm Weight: 6500 kg Machine in good condition, under power Find more here - / Contact us at -
CNC vertical machining center Type: TMV-510T Manufacturer: Tongtai Year: 2008 Control: Fanuc 0i-MF Plus X: 510 mm Y: 360 mm Z: 300 mm A: 360• B: -17• +107• Table size: 600 x 360 mm Maximum spindle speed: 8000 rpm Spindle taper: BT-30 Tools magazine: 20 positions Rapid feed (X/Y/Z): Up to 48 m/min Engine power: 5.5 kW Dimensions: 2700 x 1600 x 2310 mm Machine weight: 2000 kg Tank capacity: 200 liters Renishaw tool probe Tool holders BT30 5th axis Tsudakoma TN-101 Machine in good condition, under power Find more here - / Contact us at -
CNC vertical machining center Type: Emcomill E 1200 Manufacturer: Emco Year: 2014 Control: Siemens Sinumerik 828 D 4th axis included X: 1200 mm Y: 600 mm Z: 500 mm Table: 1300 x 570 mm Max table load: 1500 kg Spindle speed: 12000 rpm Spindle cone: ISO 40 Tool magazine: 30 positions Chip conveyor Dimensions: 3200 × 3350 × 3060 mm Machine weight: 12000 kg In good condition, under power Find more here - / Contact us at -
CNC vertical machining center Type: DMU 80 T Manufacturer: Deckel Maho Year: 2003 Control: Heidenhain TNC 530 X: 810 mm Y: 650 mm Z: 650 mm Table: 1250 x 710 mm Magazine for 30 tools SK40 clamping and tools Internal cooling through the spindle center 40bar External emulsion tank with separator 600l. Max spindle speed 12000 rpm Ethernet interface for networking the machine Internal/external air pressure cooling New motherboard with SSD - the machine loads programs quickly and can use rapid traverse machining New spindle in 8/2023, from exchange 300 hours Find more here - / Contact us at -
CNC vertical machining center Type: DMU 80 T Manufacturer: Deckel Maho Year: 2002 Control: Heidenhain TNC 430 X: 900 mm Y: 650 mm Z: 600 mm Spindle speed: 8000 rpm Spindle taper: SK40 Tilting spindle, can be folded and used as a horizontal boring machine Table: 1100 x 650 mm Tool magazine: 24 positions Through spindle cooling 40 bar Chip conveyor Machine in good condition, under power Find more here - / Contact us at -
CNC vertical machining center Type: MCV 800 QUICK Manufacturer: MAS Year: 2018 Control: Heidenhain TNC 620 X: 800 mm Y: 500 mm Z: 550 mm Table: 1000 x 500 mm Max table load: 600 kg Spindle speed: 12000 rpm Spindle cone: ISO 40 Tool magazine: 24 positions Workpiece + tool probe Heidenhain TS/TT 460 Central automatic lubrication Cooling through the spindle center (20 Bar). Machine in good condition, under powet Find more here - / Contact us at -
CNC lathe Type: GA-360 LM Manufacturer: Goodway Year: 2005 Control: Fanuc Series Oi-TC Max turning diameter: 500 mm Max turning length: 1200 mm Clamping head: 100 mm Swing over bed: 700 mm Spindle bore: 75-105 mm Chuck size: 15" LM driven tools with milling function (C-axis) Driven tool motor: 7 hp Spindle motor: 30 hp Revolver head: 12 VDI 3-jaw chuck Chip conveyor Tailstock Machine in good condition, under power Find more here - / Contact us at -
Fiber laser cutting machine Type: G 3015 MF Manufacturer: Hans Year: 2018 CNC control: Hans 701 Pro Exchange tables 3 m x 1.5 m X: 3050 mm Y: 1530 mm Z: 250 mm Laser source: IPG 3000 W Laser type: Fiber Laser head: Precitec Machine weight: 8,000 kg Max. workpiece weight: 750 kg Sheet metal cutting thickness: steel 15 mm stainless steel 10 mm aluminum 6 mm brass 5 mm Machine in good condition, under power Find more here - / Contact us at -
A Mazak HCN 4000 is a high-performance Horizontal Machining Center (HMC).In the world of CNC machining, the "HCN" (Horizontal Center Nexus) series is Mazak’s workhorse for high-speed, high-precision production Technical data: Travel distances: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm Table: Pallet size: 400 x 400 mm Number of pallets: 2 Indexing: 1° increments Spindle: Spindle mount: SK-40 Max. speed: 18,000 rpm Power: 35 kW Tool magazine: Capacity: 60 tools Equipment: Control: Mazatrol SmoothG Tool length measurement Cooling through the spindle at 32 bar Niagara flushing Air through the spindle Renishaw OMP 60 probe Renishaw Inspection + (version 2022) Tool ID system Chip conveyor Additional filter cartridges Thread cutting without compensation chuck G00 tilt function CE marking Find more here - / Contact us at -
Manufacturer: Rösler Model: RBD 600-2/4 Year of Manufacture: 2007 Technical Data Connection Values / Power Requirements - Supply Voltage: 3 x 400 V - Compressed Air Quality: Cleaned, dried, oil-free, filtered, filter 40 um, residual moisture at 20 C less than 30% - Ambient Temperature / Humidity: +5 C to +40 C, per DIN 40040 G (annual average less than 65%, within 60 days less than 85%) - Blast Media Fill Quantity (kg): approx. 1500 - Required Dust Extraction Capacity (m3/h): 5600 Dimensions / Weights - Length (mm): 12400 - Width (mm): 3800 - Height (mm): 2300 - Weight of Heaviest Single Component (kg): 6000 Find more here - / Contact us at -
Manufacturer: SAF Model: NERTAJET HP120 Year of Manufacture: 2000 Operating hours : 17,901h Features: - Working format: 1500 x 3000 mm (2000 x 3000 mm possible) - Steel: - max. 20 mm at approx. 900 mm/min - 1 mm at approximately 6,500 mm/min - Stainless steel: - max. 15 mm at approx. 700 mm/min - 1 mm at approximately 5,500 mm/min - Aluminum: - max. 20 mm at approx. 800 mm/min - 1 mm at approximately 5,000 mm/min - features a sophisticated extraction system that selectively extracts air only where the burner is operating. Sensors mounted on the rail pneumatically control the dampers in the air duct. (Filter system not included.) - Underwater cutting: The water level in the basin can be lowered or raised at the touch of a button, controlled by a water level sensor and compressed air-operated mechanism, for comfortable cutting. - Flexibility: Allows both wet and dry cutting. - Spare a ...
5-axis two-spindle center with pseudo-palletization Type: DZ 24 Magnum Manufacturer: Chiron Year: 2015 Hours: 57000 Control: Siemens Sinumerik 840 D Table clamping surface 2X D 500 mm X: 830 mm Y: 630 mm Z: 630 mm A: rotating drum C: rotary tables Spindle speed: 0 - 20000 rpm Number of controlled axes: 5 No central cooling Spindle clamping cone: HSK-A63 Tool magazine: 2 x 30 positions Machine weight: 18500 kg Dimensions: 7000 x 3200 x 3500 mm BLUM aiming laser probe Chip conveyor Find more here - / Contact us at -
Here is the translation of the listing into English, maintaining the technical specifications and professional tone. --------------------------------------------------------------- Listing: Used FARO Quantum S ScanArm Item: 1 x Used FARO Scanner Quantum S + ScanArm Model: 21000-725 Quantum S (2019) Status: Functional. Currently without valid calibration. At least one of the two batteries is defective (possibly both due to long periods of non-use). The device can be operated via mains power without a battery. Note: Sold without a laptop. Software and license keys are included. Technical Details (Per Original Order): - 21000-725 CPO Quantum S 2.5m (7-Axis): FARO´s most accurate and stable portable measuring device with a 2.5-meter measurement volume. - Arm with Bluetooth and wireless technology - Calibration kit - Base plate - 3mm and 6mm probes - Cables - Transport case - Rechargeab ...
turning diameter: - mmturning length: - mmcontrol: - : ohne Gewähr total power requirement: - kWweight of the machine ca.: 4 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: REDMER Model: 3-K10/200 Year of Manufacture: 1989 Press Force: 1000 kN (10 Ton) Motor Power: 3.74 kW Find more here - / Contact us at -
Manufacturer: MAZAK Model: FJV-35/60 Year of Manufacture: 2003 Find more here - / Contact us at -
Manufacturer: MAZAK Model: FJV-60/120 Year of Manufacture: 2003 Find more here - / Contact us at -
Manufacturer: Mazak Model: FJV-50/80 Year of Manufacture: 1999 Main Circuit: 3AC V50/60Hz Control Circuit: AC100V / DC24V Main Motor: Max. 15.0 A / 200 V Rated Capacity: 67.6 kVA Find more here - / Contact us at -
Manufacturer: Deckel Maho Model: DMC 100 U duoBLOCK Year of Manufacture: 2011 Find more here - / Contact us at -
feed pressure: 12 bartotal power requirement: 22 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: DMG Model: ECO 210 Year of Manufacture: 2007 Electrical Data: Voltage: 230 V Frequency: 50 Hz Power Consumption: Max. 650 VA Find more here - / Contact us at -
feed pressure: 13 baroutput: 30 kwNumber of working hours: ca. 46980 h: 5,58 m³/minweight of the machine ca.: 0,53 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2011 OPS Ingersoll Gantry Eagle 5 (often referred to as the Eagle G5 or Gantry Eagle 500) is a high-precision Sinker EDM (Electric Discharge Machining) machine. Feature Specification X / Y / Z Travels 525 mm / 400 mm / 450 mm Work Tank Type Drop-tank (rises/falls for easy access) Max Workpiece Weight 1,000 kg (2,205 lbs) Generator Eagle PowerSPARK (60 Amp standard, 110 Amp optional) Z-Axis Jump Speed 18 m/min (This is exceptionally fast for EDM) Find more here - / Contact us at -
feed pressure: 12 barNumber of working hours: ca. 17.402 htotal power requirement: 22 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The Charmilles Robofil 2020 is a high-precision Wire Electrical Discharge Machine (Wire EDM). Manufactured in Switzerland, this machine is designed for detailed "erosion" work, making it a staple in toolmaking and the production of complex medical or industrial components. Here is a clean, structured text block for the Charmilles Robofil 2020 (1994) that you can copy and paste directly into an online listing or equipment database. --------------------------------------------------------------- Machine Specifications: Charmilles Robofil 2020 General Information - Manufacturer: Charmilles Technologies (Switzerland) - Model: Robofil 2020 - Year of Manufacture: 1994 - Machine Type: CNC Wire-Cut Electrical Discharge Machine (Wire EDM) Technical Travel & Capacity - X-Axis Travel: 320 mm (12.5") - Y-Axis Travel: 220 mm (8.6") - Z-Axis Travel: 116 mm (4.5") - U/V Axis Travel: ± 48 mm (fo ...
