Diversos (118)

Serra de Kaltenbach Máquina de Perfuração de Colunas Alzmetall Máquina de soldar Kemppi Máquina de soldadura por pulso

Includes extra roller. Auction-ID: A1-50090-136

Devido ao encerramento das ações, peço para vender o seguinte: 1x NC tabela rotativa 3x maxilares rotativo Compressor de refrigeração 1x 2x Separador de névoa de óleo Constante de corrente 3x Armário de potência 1x Máquina de ciclo rotativo 1x Alimentador de rebite 8x 1x Grande bomba de água 8x pés de medição 1x teste de binário Unidade de recarga climática 1x carro 1 x máquina de afinação dupla Misturador de tinta 1x, novo 1x unidade de sucção de gases de escape Tanque hidráulico 1x com bomba Sistema de arrefecimento 1x O preço é líquido. Visualização possível por marcação.

Tiltable and adjustable in height with cylinder Auction-ID: A1-44050-166

Estação de marcação móvel Marcação de peças metálicas - foi usada na Faurecia Máquina verificada - bem, pronta para ser usada

Auction-ID: A1-44050-713

on warehouse trolley Auction-ID: A1-49889-240

Auction-ID: A1-50090-64

Including gas cylinder hand truck Auction-ID: A1-44050-730

Hardening oven Model: Electric Manufacturer: Reinhardt Type: E2 Year of construction: 2009 Working temperature: 50-300 degrees Workspace: 0.21m3 Opening size: 650x650mm Voltage: 3x400V Motor: 0.55kW Auction-ID: A1-40982-78

The TUCKER bolt tool with the components T022 910/400 – Type: DCE1500/5.021.20.99.0400.S and T039 001/400 – Type: PKE.00.00 is a professional system for automated stud welding. Developed for industrial use, it impresses with its reliability, precision and durability – especially in body construction and automotive production. The system was in use at Audi AG until the takeover. Components & Type Designations T022 910/400 – Type: DCE1500/5.021.20.99.0400.S T039 001/400 – Type: PKE.00.00 Areas of application Automated stud welding Body and vehicle construction Robot-integrated assembly lines Precise fastening of threaded bolts and holders Condition Used, in good condition Scope of Delivery 1x Tucker T022 910/400 (DCE1500) 1x Tucker T039 001/400 (PKE) Auction-ID: A1-50474-2

Böllhoff RIVSET self-pierce riveting system Pliers 9525-080-236-6 Year of Make: 2011 Scope of delivery see pictures. Was in operation at Audi. Auction-ID: A1-50474-4

Technical data Manufacturer: Wagner Type: 211-25/25 Design: Tabletop demagnetizer Device number: 154169 Connection voltage: 220 V Mains frequency: 50 Hz Current consumption: 5.0 A Configuration With flat metallic work surface and separate control unit with rotary control as shown. Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-50403-19

Baykal hydraulic plate shear Type: HGL 3100x6 Year of construction: 2012 Serial Number: 18484 Max. cutting capacity: 6 mm (St42) Cutting length: 3,060 mm Number of strokes: 20 per minute Motor power: 11 kW System pressure: 200 bar Connection: 400 V / 50 Hz / 3-phase Hydraulic reservoir: approx. 140 litres Machine weight: approx. 5,500 kg Dimensions (LxWxH): approx. 3,860 x 2,560 x 1,560 mm Equipped with digital operation/readout Equipped with adjustable backgauge Equipped with hydraulic downholders Equipped with foot control with emergency stop Auction-ID: A1-47364-42

2x Rolls Forbo Siegling Conveyor Belt E 12/2 U0/U10 GSTR green 1x Roll 16062 x 1800 mm 1x Roll 21057 x 1800 mm Applications: Metalworking & Automotive Product data sheet see pictures. Auction-ID: A1-50474-6

Maximum capacity 0.5 mm; working width 600 mm; adjustable backgauge; hand-operated; Auction-ID: A1-44050-96

Auction-ID: A1-44050-245

Auction-ID: A1-50251-18

equipped with profile steel base base; capacity around 11 mm; capacity flat 5 mm; Auction-ID: A1-44050-25

Consisting of various welding machines, a bending machine, an extraction system, and further accessories.Attention: Condition of the devices unknown, probably mostly used as a spare parts storage!

GUILLMIN orbital riveting machine, model S5-INSTRU. Thrust force: 750 daN Rivet diameter: 5 mm Pneumatic thrust unit Operating pressure: 4 to 6 bar Adjustable stroke: 0 to 50 mm Spindle Rotational Speed: 1,500 RPM Spindle Motor Power: 0.37 kW Siemens S7-1200 PLC included Kistler measuring device included Weight: 500 kg Auction-ID: A1-49938-22

Set of 6 face milling cutters with ISO 50 cutter holders and carbide inserts. Cutters suitable for surfacing and machining operations. ISO 50 conical cutter holders Equipped with carbide inserts. Auction-ID: A1-49938-23

Technical data to follow! Currently no TÜV, in need of repair for approx. 2000 EUR.Additional technical specifications:• Loading area: 4000 x 2000 mm

Condition can be seen in the pictures Auction-ID: A7-50356-88

Condition can be seen in the pictures Auction-ID: A7-50356-86

Condition can be seen in the pictures Auction-ID: A7-50356-85

Condition can be seen in the pictures Auction-ID: A7-50356-87

Condition: to be seen in the article pictures Auction-ID: A7-50356-12

Auction-ID: A7-50346-19

3 x 380 volts; capacity: maximum 32 mm; including cooling unit 1 x 220 volts; Current assembly for HSKA63; for ISA40/50 and so on; Auction-ID: A1-49785-4

Auction-ID: A7-50346-24

• Consisting of 5 pieces• different designs

Lifting TableConditionuntestedLocation72589 Westerheim DELot56

• Support surface: approx. 430 x 950 mm• on base frame

Used unchecked Auction-ID: A7-50255-39

including tooling for the production of pipes with diameters of 18, 19, 20, 25, 32, and 40 mm, as well as profiles in sizes 14x14 mm, 16x16 mm, and 20x20 mm. The applicable sheet thickness range is 0.6 mm to 1.5 mm. The forming machine—designated \"I1\"—was acquired from an Italian steel profile manufacturer in 2002 and subsequently adapted in-house for the production of the aforementioned steel pipes and profiles. The line comprises the following components: an uncoiler, a strip joining table, a strip accumulator, a forming unit, a sizing unit, a high-frequency generator, a flying saw, a discharge unit, a hydraulic pump, a control panel, and a set of forming rolls. The line utilizes a Lenze control system. Auction-ID: A1-50268-1

Used unchecked Auction-ID: A7-50255-37

1 piece gas-heated chamber furnace with air circulation and hearth trolley Type: KLWg 220/180/650 Gas-heated chamber furnace for unsupervised operation, designed for three-phase three-phase current 400 volts / 50 Hz. Suitable for temperatures up to 700°C and for natural gas \"H\". Technical data External dimensions approximately: Width: 3400 mm Width with control cabinet: 3800 mm Height: 3200 mm Length with retracted hearth carriage: 8000 mm Length with extended hearth carriage: 15500 mm Interior clear dimensions approximately: Width: 2400 mm Height above beams: 1800 mm Length: 6500 mm Volume: 25.7 m³ Max. batch dimensions approximately: Width: 2000 mm Height: 1500 mm Length: 6100 mm Max. weight: 20000 kg Equipment / Execution 4 Rule groups 8 burners Total burner power: 720 kW Burner air blower: 5.5 kW Circulating motors: 4 x 22 kW Bogie hearth drive: 5.5 kW Fuel absorption capac ...

Transport dimensions and space requirements can be found in the attached installation plan, pallet size 630x630 mm, incl. HACS pallets and order management Auction-ID: A1-50260-50

Cable stripper and processor, can separate metals from the residual product. 937 operating hours Auction-ID: A3-46161-17426

Cable stripper up to 5cm diameter, not used much in working condition. Auction-ID: A3-46161-17424

Auction-ID: A1-50085-55

This sandblasting booth is included as standard. Front loader with two gas struts Blasting gun 4-piece nozzle set Set of gloves. Lighting Set of protective films Foot pedal. Pressure regulators Suction with microfilter . Original packaging Internal dimensions 1170 x 880 x 825 mm Operating pressure 8 bar Dimensions L x W x H 1.33 x 1.24 x 1.7 m Machine weight approx. 0.16 t The system is delivered in black Condition: never used / new (5) Auction-ID: A7-50084-85

Technical data of the blasting vessel with extraction: Capacity 80 litres. Length of the hose 2.5 m. Working pressure 60 - 125 PSI. Air consumption approx. 250 - 600 l / min Packaging dimensions 102 x 46 x 51.5 cm. Weight Approx. 36 kg Very useful for blasting places on large objects or outdoor objects. Delivery incl. microfilter with extraction. Condition: never used / new (5) Auction-ID: A7-50084-192

Mass finishing machine complete with conveyor unit See pictures Tank outer diameter 1250 mm Container diameter/ container height 1000 / 350 mm Speed range 920 / 1415 rpm Operating voltage 380 V Volume 125 liters Drive power 1.9 kW Machine weight approx. 600 kg Dimensions L x W x H 1.4 x 0.9 x 1.5 m Auction-ID: A7-50084-86

This jet cabin is included as standard. Blasting gun 4-piece nozzle set Set of gloves Lighting Set of protective films Door on the right side Internal dimensions 830 x 530 x 530 mm Operating pressure 2.2 - 5.5 bar Air consumption at 6 bar min. 250 l/min Machine weight approx. 50 kg Package size max. 0.95 x 0.65 x 0.7 cm Condition: never used / new (5) Auction-ID: A7-50084-107

This jet cabin is included as standard. 1 x Jet Pistol. 1 x 4 Pieces Nozzle Set 1 x Set of gloves. 1 x LED lighting. 3 x protective film. Internal dimensions 680 x 450 x 430 mm Operating pressure 3 - 6 bar Air consumption min. 250 l/min. Machine weight approx. 28 kg Package size max. 0.76 x 0.5 x .75 cm Condition: never used / new (5) Auction-ID: A7-50084-202

Duo blast cabinet 10 PET sheets to protect the windows 10 PET plates to protect fluorescent lighting 2 foot pedals 2 blasting guns 6 ceramic nozzle inserts (6 mm diameter) Internal dimensions 2060 x 1270 x 86 mm Operating pressure 2.5 - 8.0 bar Machine weight approx. 0.23 t Dimensions L x D x H 2.08 x 0.73 x 0.8 m Condition: never used / new (5) Auction-ID: A7-50084-148

This sandblasting booth includes as standard: Front loader with two gas struts. Blasting gun 4-piece nozzle set Set of gloves Lighting Set of protective films Foot pedal. Pressure regulators Extraction with microfilter Original packaging Internal dimensions 1170 x 580 x 580 mm Operating pressure 2.2 - 5.5 bar Dimensions L x W x H 1.22 x 0.93 x 1.7 m Machine weight approx. 0.15 t The system is delivered in black Condition: never used / new (5) Auction-ID: A7-50084-94

Technical specifications of the mobile blast vessel Capacity 40 liters. Length of the hose 2.5 m. Working pressure 60 - 125 PSI. Air consumption approx. 250 - 600 l / min Packaging dimensions 770 x 415 x 365 cm. Weight Approx. 20 kg Condition: never used / new (5) Auction-ID: A7-50084-9