subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 109)
CNC lathe Type: Alpha 2800 XS Manufacturer: Colchester Year: 2011 Control: Fanuc Series 21i-TB Spindle bore: 120 mm Swing over bed: 800 mm Swing over support: 520 mm Max turning length: 1500 mm Machine in good condition, under power Find more here - / Contact us at -
Manufacturer: Kaiserpresse Model: PA620/2 Type of Machine : Press Find more here - / Contact us at -
Like NEW! Never used Inductive hardening machine for bolts M8 and M10 with year of manufacture 2019 The equipment is designed for automatic inductive hardening of screws and bolts M8 and M10. The plant was built by the company Grimm Zuführtechnik. It is designed for approx. 70-80 parts per minute (depending on the component) and has various monitoring options (temperatures, component heights, component types, rotation, etc.). The components are conveyed from a hopper belt via a steep conveyor to a linear sorter and from there are separated and transferred to an 8-station indexing table with 2 nests per station. A 50kW HF generator from IDEA is connected, which provides further monitoring (energy quantity, earth fault monitoring, flow quantity and water temperature of the inductor, etc.). The plant has its own tank for quenching water, from which the components are transported out ...
CNC lathe Type: CTX 510 Ecoline Manufacturer: DMG Year: 2011 Control: Siemens Sinumerik 810D Max turning diameter: 465 mm Max swing over bed: 680 mm Max swing over support: 465 mm X: 300 mm Z: 1050 mm 315 mm 3-jaw hydraulic chuck Max spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% DC): 33/22 kW Max spindle torque (40%/100% DC): 33.5%: 630/420 Nm Maximum rotation speed of driven tools: 4000 rpm Programmable tailstock Tool probe Chip conveyor Suction Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions: 5250 x 2300 x 2000 mm Machine weight: 8000 kg In good condition, under power After repairing the linear line Accessories: Both external and internal tool holders Driven tool holders – direct and lateral Drill holders Hard jaws - 1 set Soft jaws - approx. 10 sets Find more here - / Contact us at -
serial number: 1296 : ja changer: ja fachdocumentation: ja control: Heidenhain 426 weight of the machine ca.: 6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: LEINHAAS Model: AR11-160 RH 1 Year of Manufacture: 1991 Mains voltage: 3x400V / PEN / 50Hz Control voltages: 220V AC 50Hz / 24V DC Press connected load: 44 kW Total connected load: 55 kW Machine operating hours: 62,212.3 h Machine type: differential travel press Press force: 1300 kN Additional equipment : The strip feed system can also be purchased separately - Strip feed system from ALBA (Includes coiler, straightener, and roller feed) Find more here - / Contact us at -
usava
Manufacturer: Ebu Model: STA 200/2000 Year of Manufacture: 2005 Overhaul: 2016 ( is currently equipped with a longitudinal transfer and has run very little since the overhaul) Punching force: 200 tons Installation space: 2000+800 Ram stroke: 16–160 Plunger adjustment: 0–120 mm Advance max.: 9999.9 Max. bandwidth: 300 Speed range: 30–150 Find more here - / Contact us at -
Manufacturer: SEDIN Model: 1525 Year of Manufacture: 1980 Type of Machine : Vertical Turning Lathe Turning Diameter: 2500 mm Table Diameter : 2260 mm Turning Height : 1600 mm Load on table max: 13.000 kg Machine weight : 36.500 kg approx Find more here - / Contact us at -
Manufacturer: WMG Model: BMT 105 PTP Year of Manufacture: 2003 Type of Machine : Horizontal Boring Machine Voltage: 400V Frequency: 50Hz Current Rating: 63A Protection Class: IP43 Control Voltage (Uc): 24V DC Machine Specifications: - Control: CNC Heidenhain TNC 124 - Table Size: 1750 mm x 2000 mm - Spindle Diameter: 105 mm - Travel (X/Y/Z/W): - X: 2500 mm - Y: 1850 mm - Z: 1400 mm - W: 700 mm Find more here - / Contact us at -
diameter: 20 - 100 mmworkpiece length: 3000 - 12000 mmnumber of rolls: 2 Control: Siemens SPS/PLC Tensile Strength: 70 kg/mm²feed speeds: 60 m/minAngle: 10 - 22 °main drive motor: 132 kWroll speed: 180 U/mintotal power requirement: - kWweight of the machine ca.: 24,5 tdimensions of the machine ca.: 7500 x 3000 x 2850 mMachine was retrofitted (Eletric) and not much used2 roller straightening machine, fully hydraulic and equipped with:- Siemens PLC/SPS control system- Hydraulic roller- Loading table with chain transport- Infeed channel with pressure roller- Pressure rollers- Gearboxes and motors- Siemens Sinamics drives- New electrical system- Hydraulic units- Spare set of rollers- Machine with complete hydraulic adjustment-- Upstroke of upper Roll: 210mm-- Hydraulic cap Stroke: 13mm-- Side Guides and Scrapers set at Exit: 20+35mm 35+65mm ...
CNC lathe Type: ST-20 Y Manufacturer: Haas Year: 2023 Control: Haas Max.turning diameter: 298 mm Max.turning length: 572 mm Swing over support: 533 mm X: 213 mm Z: 572 mm C-axis Y-axis: +/- 50.8 mm Driven tools Tailstock Tool probe X/Y/Z axis rapid traverse - 24.0/12.7/24.0 m/min Spindle cone: A2-6 Max. power: 14.9 kW, spindle drive Vector Drive Max. torque: 203 Nm Max. spindle speed: 4000 rpm Spindle bore: 63.5 mm Automatic hydraulic chuck: 210 mm Turret MBT65 : 12 position Max. speed of driven tools: 4000 rpm Drive of all positions of the BMT65 turret Coolant tank: 208 l with pump El. connection 3x400V/50HZ, 14kVA Machine weight: 5300 kg Linear rollers pre-tensioned axis guide Central automatic lubrication - axes with grease / spindle with oil Lighting of the working space Automatic hydraulic 3-jaw chuck A set of tool holders (only for BOT or HYBRID revo ...
Manufacturer: Haas Model: ST-20Y Year of Manufacture: 2016 Voltage: 400V Phase: 3 Frequency (Hertz): 50/60 Hz Full Load Current: 27 Amps Largest Load Current: 18 Amps Short Circuit Interrupting Capacity: 10,000 Amps Wiring Diagram Reference: 96-0284 Short Circuit Current Rating: 5,000 Amps RMS symmetrical Find more here - / Contact us at -
