spawarki używane na sprzedaż (1,828)

table length: 3000 mmtable width: 1500 mmtable height (lateral area): 100 mmweight: 726 kgThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 3000 x 1500 x 100 mm- Plasma nitrided version Professional 750 with scale- Including 8x basic equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kWvolume capacity: 20.000 m³/hweight: 1590 kgModular plug & play airtowerfor hall extraction of welding fumes with integrated, soundproofedFan, automatic, differential pressure controlledFilter cleaning, system control with color display, particle pre-separation andIFA - tested filter cartridges. The system is for a volume flow ofaverage 20,000 m³ / h designed1st filter stage - main filter:Filter area: 222 m²Number of filters: 6 piecesDust class according to DIN EN60335-2-69: M.Degree of separation:> 99.9%Cleaning: Jet - PulseCompressed air connection: NW 7.2 mm,4-6 bar, oil and water free2nd filter stage - fine dust filter.Filter area: 65 m²Filter class according to ISO 16890: ISOePM1 80%3rd filter stage -Synthetic fiber mats:Filter area: 8 m²Filter class according to ISO 16890: ISOcoarse 60%Total filter area: 295 m²Dimensions:Width  ...

cutting range for steel to: 12.0 TS mmcutting range for steel to: 8.0 QS mmcapacity at 100%: 30.0 Amperecutting medium: Druckluft output: von 20 - 40 Ampereoutput: Eingang 4.9 KWvoltage: 230 Vweight: 17.9 kgrange L-W-H: 480 x 210 x 340 mmThe Avalon 40.1 is a lightweight, handy plasma cutting system with high cuttingcutting performance and top cutting quality. Its low weight and easy handlinghandling make it the ideal candidate for trade, workshop and industry.industry. Cuts carbon steel, stainless steel, aluminum, copper ...Features- IGBT technology- Active PFC technology for high duty cycle and energy efficiency- Manual switch for activating the air flow to set the test air pressure. without having to trigger the burner.- Powerful compact unit- Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts, overloading of the. ...

table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 554 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 843 kgSpecifications- High-quality S355J2+N steel + plasma nitriding- Material thickness approx. 24.5–27 mm- Hole diameter 28 mm- Holes in 100×100 mm grid pattern- Rounded corners, edges and holes- Side panel height 200 mm- Hole spacing on side panel: 50 mm- Includes scale markings on the surface- Construction reinforced with ribs- Grid lines enable precise set-ups- Special equipment for welding tables is available on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 109 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 960 mmtable load: 3.500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M20 Tilt Angle: 70-90-180 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 1.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 918 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: 42 kVAcontact pressure capacity: 600 kpweight of the machine ca.: 170 kgdimensions: 1200 x 900 x 1350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 544 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 521 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mmtable load: 1.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1,1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-105 °Tilting Speed: 30 sn min./90°dimensions: 2100x920x1100 mmweight of the machine ca.: 930 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 2400 x 1200 x 200 mm- Extreme plasma ...

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kgProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 300 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-49229-44

Auction-ID: A7-49229-45

Auction-ID: A7-49229-46

Dwustacyjne Auction-ID: A7-49229-65

Zawiera hełm ładunkowy, dodatkową latarkę Auction-ID: A1-48474-79

grubość górnej części około 50 mm. W tym akcesoria i akcesoria. Auction-ID: A1-48474-210

Wyposażony w: skrzynkę sterującą \"Kemper\", 2 ramiona pływające montowane na ścianie. W tym siatka spawaczego, wymiar około 3700x1800 mm Auction-ID: A1-48474-42

Auction-ID: A7-49056-414

Auction-ID: A7-48398-21

Auction-ID: A7-49056-404

Auction-ID: A7-49056-405

Auction-ID: A7-49089-375

Auction-ID: A7-49056-50

Auction-ID: A7-49056-169