Producent:
(Kategoria: 108)
table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0,6 t: -- mm: -- mmconsisting of:30x article no. 2-280510Quick release pin short- Clamping of 2 components- burnished- with twist lock8x article no. 2-280410.NUniversal stop 150 L - nitrided- nitrided- as standard with fine scaling on both sides4x article no. 2-280420.NUniversal stop 225 L - nitrided- nitrided- as standard with fine scaling on both sides8x article no. 2-280110.GStop and clamping angle 175 L - cast / black oxide finish- Hole / elongated hole- Cast / burnished2x article no. 2-280162.NStop and clamping angle 500 G - nitrided- Left stop- nitrided1x article no. 2-280166.NStop and clamping angle 750 G left - nitrided- Left stop- nitrided 1x article no. 2-280167.NStop and clamping angle 750 G right - nitrided- stop on the right- nitrided1x article no. 2-280910Tool trolley- painted- Permissible total weight 240 kg1x article no. 2-280164.NStop and clamping angle 500 G with turn ...
table diameter: 900 mmtable load: 1 tswivelling range: 0-135 Gradexcentricity: 200 mmtable turning speeds: 0,12 - 1,2 U/minTorque: 2000 N/mtotal power requirement: 0,75 kWdimensions of the machine ca.: 1,5 x 1,020 x 0,9 mThe D-HB tilt and turn tables are very stable due to their heavy constructionand therefore particularly suitable for heavy and precisePositioning activities and circular welding work.Features:- Easy installation- Increase in production is made possible- Improvement of the welding quality through optimal positioning andCruise control- Reduction of crane hours and handling time, during which theImproved occupational safety.- Self-locking gear, therefore no leading and trailing behind with eccentricburden- Electronic components from Schneider, Siemens and Delta- Frequency-controlled stepless speed of the turntable- High stability due to the robust construction- CE certifica ...
volume capacity: - m³ / htotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 420 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1300 mmtable load: 7.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M24 Tilt Angle: 90-180-100 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 3.050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
volume capacity: - m³ / htotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : 1190 €: 1000 x 1000 mm: 850 mm: 210 kg: 25 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capa ...
: neu : ca. 4 Wochen ab Auftragse : Polen : 7390 €: 142.63 €: 1 : 1 : 14 mm: 30 °: 9 U/min: 6 - 40 mm: 55 mm: 100 mm: 2600 mm/min: 2.2 kW: 589 mm: 541 mm: 320 mm: 65 kgbevelling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel or aluminum alloysbevelling of lower edge in inverted positionstandard shearing cutter for processing stainless/alloyed steelreversible spindle against stuck milling toolSTANDARD SETABM-14 bevellermilling cutter for stainless steelcutter extraction tooltube bevelling shafttube bevelling washerflat wrenches: 12 - 13 mm, 18 - 19 mm, 24 - 26 mmhex wrenches: 5 / 6 mmuser manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Wochen ab Auftragse : Polen : 2095 €: 1 : 1 : 21 mm: 60 °: 2820 U/min: 1.1 kW: 20 kgportable bevelling machine for processing plates and pipesintegrated milling head with 10 square TCT insertsone universal guide plate for bevelling both plates and pipescontinuous angle adjustmentanti-vibration system for comfortable operationsinduction motor with increased start-up current pipe bevelling adjustmen: 150 - 300 mm260 - 600 mm (optional)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 913 kg280030.XD7D- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 – 27 mm- Sidewall made of high quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Holes surface in diagonal grid- Rounded corners, edges and holes- Side panel height 200 mm- Holes in the side wall in the diagonal grid- Including scaling on the surface- Structure reinforced with ribs- Grid lines enable precise build-upsIncluding 4x feet basic equipment 650 item no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kWvolume capacity: 20.000 m³/hweight: 1590 kgModular plug & play airtowerfor hall extraction of welding fumes with integrated, soundproofedFan, automatic, differential pressure controlledFilter cleaning, system control with color display, particle pre-separation andIFA - tested filter cartridges. The system is for a volume flow ofaverage 20,000 m³ / h designed1st filter stage - main filter:Filter area: 222 m²Number of filters: 6 piecesDust class according to DIN EN60335-2-69: M.Degree of separation:> 99.9%Cleaning: Jet - PulseCompressed air connection: NW 7.2 mm,4-6 bar, oil and water free2nd filter stage - fine dust filter.Filter area: 65 m²Filter class according to ISO 16890: ISOePM1 80%3rd filter stage -Synthetic fiber mats:Filter area: 8 m²Filter class according to ISO 16890: ISOcoarse 60%Total filter area: 295 m²Dimensions:Width ...
turning speeds: 0,7-9,0 U/minTorque: 2,5-10 Nmtable load capacity - central/maximum: 50 kgwelding current: 400 Avoltage: 230 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting range for steel to: 12.0 TS mmcutting range for steel to: 8.0 QS mmcapacity at 100%: 30.0 Amperecutting medium: Druckluft output: von 20 - 40 Ampereoutput: Eingang 4.9 KWvoltage: 230 Vweight: 17.9 kgrange L-W-H: 480 x 210 x 340 mmThe Avalon 40.1 is a lightweight, handy plasma cutting system with high cuttingcutting performance and top cutting quality. Its low weight and easy handlinghandling make it the ideal candidate for trade, workshop and industry.industry. Cuts carbon steel, stainless steel, aluminum, copper ...Features- IGBT technology- Active PFC technology for high duty cycle and energy efficiency- Manual switch for activating the air flow to set the test air pressure. without having to trigger the burner.- Powerful compact unit- Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts, overloading of the. ...
weight of the machine ca.:150 kgdimensions of the machine ca.:1200 x 600 x 800 mm
table length: 2000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 530 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 2000 mmtable height: 200 mmbore: 28 mmweight: 1299 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 690 mmtable load: 500 kgswivelling range: 0 - 90 Gradtable load: horizontal 500 Kgtable load: vertikal 250 Kgboring diameter: 100 mmtable turning speeds: 0,2 - 1,9 U/mintotal power requirement: 0,37 kWThe D-BYT N welding manipulator has a hollow shaft, also known asSpindle bore in the rotary table, which makes inert gas welding possible. theDue to the compact design, turn-tilt tables can be installed in anyintegrate existing production facilities. Inert gas welding (forming gas).thereby simplified.Features:- Double foot pedal (start-stop/left-right) included- The new welding table D-BYT-500N includes, in addition to the standard start/Stop foot pedal also an extra remote control (on the cable).- Infinitely adjustable rotation speed of the table- Suitable for any welding process, even high frequency- Very high stability - compact model- Through hole in the turntable plate- ...
table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 730 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Polen : 26880 €: 513.41 €: 1 : 1 : 30 mm: 60 °: 500-2920 U/min: 50 - 150 m/min: 3 mm/min: 100 mm: 7.5 kW: 1216 mm: 1275 mm: 850 kgcontinuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminumhigh speed rotary milling head equipped with 10 insertscutting inserts for various materials3D contact wheel control for proper workpiece alignmentergonomic ball roller benchswarf drawerBASIC SET:SBM-500 stationary bevelling machineset of toolsuser manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kgProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 340 mmtable load: 160 horizontal kg.table load: 100 vertikal kg.swivelling range: 0 - 90.0 Gradturning speeds: 0.6 - 6.0 U/minbore: 60.0 mmmotor: 230 Voltweight of the machine ca.: 56.0 kgrange L-W-H: 385 x 340 x 375 mmFurnishing:- The table can be adjusted at an angle of 0 to 90 degrees tilt and jam- Start / stop via a location-independent foot switch.- Direction of rotation can be selected right / left.- Adjustable rotation time- The turntable has a 60 mm hollow shaft- The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter.- The table speed is adjustable from 0.6 - 6 rpm.- The control of the welding machine via the turntable control is possible.- The ground contact transmits 300 A / 100%.- The turntable and the control are separate.- HF protected.- COM 1800 control with lap welding- Operating instructions in Germa ...
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 918 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! SPECIAL OFFER SIEGMUND Retro Welding Table 2400x1200x200 mm, accessories includedSIEGMUND welding table just like 25 years agowith plasma nitriding and modern table legsProduct description- Table dimensions: 2400x1200x200 mm- High-quality S355J2 steel with plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole diameter 28 mm- Drill holes in 100x100 mm grid- Corners, edges, and drill holes chamfered at 45°- Side panel height 200 mm- Drill holes in side panels in a diagonal grid- Construction reinforced with ribsPlasma-nitrided version:- Protection against rust / scratches / weld spatter adhesion- Corrosion-resistant / higher load-bearing capacitySpecifications:- 28-hole pattern / Dimensions 2400 ...
current capacity: 42 kVAcontact pressure capacity: 600 kpweight of the machine ca.: 170 kgdimensions: 1200 x 900 x 1350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : 10265 €: 197.09 €: 4000 x 2000 mm: 850 mm: 8000 kg: 2340 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (stan ...
: neu : ca. 2 - 4 Wochen ab Auftr : 2022 €: 1500 x 1000 mm: 3000 kg: 272 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,1500 x 1000 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...
