Producent:
(Kategoria: 103)
max. wheel diameter: 400 mmmax. number of teeth: 150 max. module: 5 total power requirement: 16 kWweight of the machine ca.: 10 tWorkpiece Ø, min./max. 30 - 400 mmNumber of teeth 6 - 150Module range, max. 5 Tool holder shaft Ø SK 30 / 20Tool speeds 4,000 rpmSpindle drive max. infinitely variable 1.8 kWFeeds, longitudinal and cross 0.001 - 12 m/minWorkpiece speed, max. (1.5 kW) C Axis 2,000 rpmWorkspindle slide 400 mmTool speed, max. 3,000 rpmTool holder SK 30Total electrical load, approx. 16 kW - 380 V - 50 HzWeight, approx. 10,000 kgAccessories / Special Features BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. 2 workspindle units, left and right, which can be set at any angle. CNC controlled: Z and W Axes for tool cross slide. ...
x-travel: 600 mmy-travel: 250 mmz-travel: 350 mmtotal power requirement: 5,5 kWUniversal Production and Toolroom Milling MachineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 0 mmmax. number of teeth: 0 max. module: min. module: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC controlled milling machine for synchronous ringsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diameter: 0 mmWidth: 0 mmBore: mmTangential head for gear hobber RS 2 - also available: Tangential head for gear hobber RS 00 !The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 mmy-travel: 375 mmz-travel: 250 mmControl: CNC 432 total power requirement: 7 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 3 x 3 x 2 mNr. 3666Universal tool milling machine MAHO MH 400 C- in need of repair - unclear defect -Arbeitsbereich: 400 x 375 x 250Steuerung: Philipps CNC 432 - BahnsteuerungSpindle SK 40Speed range 80 - 4000 rpmDimensions: 2.20 x 1.60 x 1.70 mWeight approx. 1500 kgThe machine comes from a trade-in,Screen appears, control cannot be switched onUnknown defectsMachine is sold as a spare parts carrier / hobbyist machineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1.000 mmy-travel: 340 mmz-travel: 450 mmtable:: 1.300 x 400 mmspindle taper ISO: 40 SKturning speeds: 32 - 1.400 U/minspindle stroke: 80 mmtotal power requirement: 7,5 kWFeatures:- Universal console milling machine with HEIDENHAIN digital display- Mechanical tool clamping- Cooling system- Various SK 40 tool holders- Machine documentation in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 580 mmy-travel: 200 mmz-travel: 340 mmspeeds: 115 - 1750 U/mintable surface area: 1000 x 240 mmtool taper: ISO 40 total power requirement: 4,5 kWweight of the machine ca.: 820 kgdimensions of the machine ca.: 1290 x 1090 x 2170 mmUniversal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 PlusDescription:- Heavy, solid design made of high-quality, vibration-absorbing gray cast iron- Oil bath gear with ground, hardened gear wheels- Coolant system- Halogen machine lamp with bundled beam- Solid and large cross table, precisely surface-machinedwith T-slots and adjustable wedge strips- Milling head can be tilted ± 45°- Right/left rotation- X-axis moves either with the handwheel or via the table feed device- Automatic limit switch on the X-axis- Height-adjustable protective screen with microswitch, against fl ...
x-travel: 400 mmy-travel: 200 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSK40, xyz 400mm/200mm/400mm, table size 750mm x 300mmspindle speed 40-1600rpm, infeed 8-320mm/minweight ca. 2000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 525 mmz-travel: 500 mmweight of the machine ca.: 6,5 tCNC Steuerung Heidenhain TNC 426KühlmitteleinrichtungSpänewanneCNC control Heidenhain TNC 426coolant devicechip tankTechnische Daten / technical details:X-Weg / X-travel 600 mmY-Weg / Y-travel 525 mmZ-Weg / Z-travel 500 mmSpindeldrehzahlen / spindle speed 6300 UpM /rpmWerkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min.Universaltisch / clamping area of universal table 750x530 mmGewicht der Maschine ca. / weight 6500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 mmy-travel: 350 mmz-travel: 400 mmtool taper: SK 40 spindle turning speed range: 1,0 - 4.000 U/minfeeds: 0 - 2000 mm/minquill stroke: 60,0 mmtable-size: 650 x 350 mmT-slots: 14 H7 Control: TNC 124 engine output: 5,5 kWweight: 1800 kgdimensions of the machine ca.: 2000 x 1000 x 2100 mm New price ~ 55.000 euros ()Furnishing :- Universal tool milling machine- HEIDENHAIN pattern control TNC 124- The control panel can be swiveled to the right of the machine- hydraulic tool changer (DIN 69872)- Vertical milling head - SK 40- X-axis feed .. 0 - 2000 mm / min- Y-axis feed .. 0 - 2000 mm / min- Feed Z-axis .. 0 - 2000 mm / min- Central lubrication, electrical- coolant device- Chip tray- Operating instructions for machine + control Special accessories included:- hydraulic machine vice- many tool holders- HEIDENHAIN HR 410 electronic handwheel The data for this ad was created with Mod ...
x-travel: 500 mmy-travel: 360 mmz-travel: 420 mmcontrol: Heidenhain 355 tool taper: SK 40 weight of the machine ca.: 1,7 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 560 mmy-travel: 500 mmz-travel: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,22,22,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool adaptor: 50 mmdriven tools: 5 Stück: 4 Stück: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 870 mmy-travel: 370 mmz-travel: 400 mmtable-size: 310 x 1370 mmdistance vertical spindle / table: 50 - 450 mmfeed - longitudinal/cross: 20 - 800 mm/min: 9 - 355 mm/minrapid traverse longitudinal and cross: 3000 / 1375 mm/minspindle taper: SK 50 spindle turning speed range: 40 - 1750 U/minspindle speed:: 12 StückControl: total power requirement: 5,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 1,9 x 2,0 x 1,5 m- Powerful CNC universal milling machine- Includes Fanuc control system- Kneading milling head- Automatic feeds on X/Z/Y axes- Central lubrication system- Coolant system- Pivoting machine light- Splash guard tray- Separate transformerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 - 800 mmy-travel: 200 - 400 mmz-travel: 200 - 400 mmtotal power requirement: 3 kWweight of the machine ca.: ? tdimensions of the machine ca.: ? mShort-term free from current operational resolutionUntested, wear and tear due to age and usePrice EXW / ex foundation Machine package3 x Bridgeport1 x Bridgeport design1 x Kunzmann2 x Fritz Werner1 x DETOMBAY2 x ReckermannThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 500 mmz-travel: 500 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5,5 tWorking range: Longitudinal stroke X axis 600 mmVertical stroke Y axis 500 mmCross stroke Z axis 500 mmClamping size of angle table 530 x 900 mmMax. weight of workpiece on table 450 kgDistance from table to vertical spindle, min./max. 120 / 620 mmDistance from table to horizontal spindle, min./max. 156 / 656 mmTool taper SK 40Spindle speeds 0 - 6,300 rpmFeeds X, Y and Z Axes, max. 2 - 10,000 mm/minQuick feed X, Y and Z Axes 10,000 mm/minSpindle drive 8 kWTotal electrical load, approx. 15 kW - 400 V - 50 HzWeight, approx. 5,500 kgAccessories / Special Features DIALOG 11 CNC Control in 4 axes with all the usual options, cycles, and subprograms. Graphic display and electronic hand wheel. Vertical milling head can be pushed up manually so that the horizontal mill ...
workpiece diameter: 50 mmthreading length: 100 mmthread pitch: mmtotal power requirement: 1 kWweight of the machine ca.: 1500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1900 mmy-travel: 800 mmz-travel: 800 mmControl: control: 426 Heidenhain : dismantled: total power requirement: kWweight of the machine ca.: 12 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 710 mmy-travel: 500 mmz-travel: 500 mmtotal power requirement: 24 kWweight of the machine ca.: 7 tdimensions of the machine ca.: mM I K R O N (Switzerland)CNC Controlled Universal Milling Machine with Tool ChangerModel WF 54 VH CNC Year 1991 Serial No. 5110302________________________________________________________ Table travel, X axis, longitudinal 710 mmTable travel, Z axis, vertical 500 mmMilling head travel, Y axis, cross 500 mmMounting height below vertical spindle, approx. 600 mmNC rotary table 800 mmResolution of rotary table, C axis 0.001 °Spindle taper SK 40Spindle speeds, 3 steps, infinitely variable 10 - 6,300 rpmFeeds, XYZ 2 - 4,000 mm/minQuickfeed, XY 10,000 mm/minQuickfeed, Z 8,000 mm/minSpindle drive, approx. 15 kWTotal electrical load, approx. 24 kW - 380 V - 50 HzWeight, approx. 7,000 kgAccessories / Spe ...
x-travel: 560 mmy-travel: 320 mmz-travel: 400 mmturning speeds: 25 - 2000 U/minturning speeds: 18 Stufenspindle taper ISO: 40 SKquill stroke: 100 mmtable:: 320x1000 / 450x950 mmtable load: 125 kgfeed range: 5 - 600 mm/minfeed: 18 Stufenrapid traverse: 1200 mm/mintotal power requirement: 5,4 kWweight of the machine ca.: 1780 kg.range L-W-H: 1800 x 1500 x 1780 mm From a training workshop - good condition () Commissioned in April 2017Features:- 3-axis digital display- Ball screws on the X and Y axes- Rapid traverse in all 3 directions- Electromagnetic brake for spindle stopping- Coolant system- Chip tray- Vertical milling head with quill adjustment Milling head rotation 90° ISO 40 tool holder - Fixed box table 950 x 450 mm Number/size of T-slots: 7 / 14.0 mm T-slot spacing: 63 mm Minimum distance between base table and spindle axis: 163 mm - Machine light- Slatted guard on the vertical c ...
x-travel: 7000 mmy-travel: 2800 mmz-travel: 1100 mmspindle turning speed - stepless: max. 4000 U/minspindle drive motor: 30 kWcolumn daylight: 2550 mmtable-size: 8000 x 2000 mmtool taper: ISO 50 feed range: 1 - 15000 mm/minc-axis: +/- 105 °b-axis: 360 °Control: Siemens 840D total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: 14,8 x 7,9 x 5,4 mRetrofit end of 2026- CNC control Siemens Sinumerik 840 D- ATC for 40 tools (ISO 50)- 2 axis universal Milling head- Coolant- chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Obrotowy stół indeksujący FIBRO 800 mm - Zamknięta, kryta maszyna z drzwiami ułatwiającymi dostęp - Głowica indeksująca 2,5 x 2,5 stopnia - Automatyczne smarowanie - Podwójny łańcuchowy przenośnik chipowy - Maszyna właściciela 1e pod moc
travel -x axis: 2.100 mmtravel -z axis: 1.400 mmtravel -y axis: 1.200 mmcontrol: HEIDENHAIN - iTNC 530 numbers of positions in the tool changer: 92 tool taper: SK 50 BIG PLUS max. tool length: 600 mmmax. tool diameter: 250 mmmax. tool weight: 20 kgrotary table dia.: 1.700 mmmax. swing dia.: 1.800 mmtotal connected load: 100 A5-axis simultaneous machining center | REIDEN - BFR-22 equipped with 2-axis swivel head (A+B), NC - rotary table, 92-way tool changer, double gripper, ITC and chip conveyor.Scope of delivery:- probing systemThe machine is in good condition and can be inspected under power.Please refer to further technical details in the attachement of the offer.A machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: BFR 22 | BFR22The data for this ad was created with ModulMWS - the softw ...
x-travel: 1200 mmy-travel: 400 mmz-travel: 460 mmtable-size: 1500 x 400 mmcontrol: konventionell tool adaptor: SK40 turning speed range: 45 - 2000 U/minquill stroke: ja mmtotal power requirement: kWweight of the machine ca.: 3,2 tdimensions: 2,8 x 2,5 x 2,1 mEquipment:- ELESTA digital display- Infinitely variable feed- Coolant system- Horizontal milling attachment- Chip guard- Chip trays- Hydraulic machine vice- Machine light- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 710 mmy-travel: 500 mmz-travel: 460 mmtable surface area: 1000 x 500 mmspindle taper: SK 40 control: HEIDENHAIN TNC 155 spindle turning speed range: 31,5 - 3150 U/minfeeds longditudinal/cross/vertical: 1 - 3000 mm/minrapid traverse longitudinal and cross: 6 m/minrapid traverse vertical: 4 m/minquill stroke: 110 mmdistance spindle nose and table: max. 559 mmtable load capacity: max. 500 kgtotal power requirement: 14 kWweight of the machine ca.: 3,3 tdimensions of machine L x W x H: 2,20 x 2,30 x 2,15 mAccessories: vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 10.000 mmy-travel: 2.200 mmz-travel: 1.300 mmcontrol: HEIDENHAIN TNC 640 clamping table: - surface area: 11.000 x 2.000 mmmax. workpiece weight: 10.000 kg/m²Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° HirtverzahnungConstant Power at 100 % ED: 43 kWSpeed range, stepless: 15 - 5.000 min-1max. torque: 900 Nmtool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mmworkpiece length: 400 mmweight of tools max.: 20 kginternal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/minmax. feed force X-Y-Z-axis: 16.000 Nweight of the machine ca.: 40 tdimensions of the machine ca.: 18,2 x 6,0 x 4,9 m• Universal milling head, 2.5° ind ...
x-travel: 1750 mmy-travel: 1400 mmz-travel: 700 mmcontrol: Heidenhain TNC 530 Torque: 101 Nmturning speeds: 15000 U/minspindle taper: HSK A63 engine output: 22 / 18 kWtable-size: 1200 mmtable load: 5000 kgtool change unit: 60-fach column daylight: 1430 mmdistance table - lower edge spindle: 105 - 905 mmA-Axis: 360 / 0,001 °B-axis (table): 0,001 °column daylight: 1430 mmtotal power requirement: 52,9 kWweight of the machine ca.: 22 tdimensions of the machine ca.: 6,2 x 3,75 x 4,3 m5 axes simultaneous- CNC control Heidenhain TNC 530- Milling head - Coolant design: external cooling + air, internal cooling + air (60 bar)- Tool changer 60-fold (HSK-A63)- chip conveyor- Electronic handwheel- CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Heidenhain 355 x-travel: 850 mmy-travel: 550 mmz-travel: 450 mmtool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Heidenhain TNC 355 x-travel: 1.000 mmy-travel: 400 mmz-travel: 450 mmsurface area: 1.300 x 400 mmfeed range: 1 - 6.000 mm/minnumber of spindle speeds: 60 - 3.600 U/min vertikalnumber of spindle speeds: 30 - 1.800 U/min horizontaspindle taper: SK50 vertical and horizontal milling possible: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 7000 mmy-travel: 3200 mmz-travel: 1500 mmControl: Heidenhain TNC 530 table-size: 6000 x 3000 mmtable load: - tspindle turning speed range: 6000 / 18000 U/mintool taper: ISO 50 / HSK 63 feed: 50000 mm/minspindle motor: 34 kWA-Axis: + / - 180 °c-axis: 0-360 °distance between columns: 4300 mmPassage height: 2300 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: 12,2 x 9,3 x 5,9 mEquipped with:- Heidenhain TNC 530 CNC control- 1 milling head (TAEM) ISO 50, 6,000 rpm- 1 electric spindle head (TUPC) 18,000 rpm, HSK 63- 1 extended head ISO 50, 6,000 rpm- 40-position tool changer (15x HSK A63, 25x ISO 50)- Coolant system (40 bar IKZ / 4 bar external)- CE mark- EnclosureThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
