Graule Model ZS 135/N (tilting and swivelling) Motor: 2 or 3 KW 400 Volts Cutting height: 135 mm – 90°, 92 mm – 45°tilted Stroke: 460 mm – 90° and 320 mm – 45° Saw: 350 mm Swivelling: 45° – 90° – 25° Titling: 45° – 90°
Graule ZS170N 3D – with NC controlled tilting & swivelling Manufacturer: Graule – with Tigerstop NC-control Type: ZS170N – with Tigerdrive control (tilting & swivelling) M-Nr.: 2014/78/27 Year: 2014 Graule ZS170N Motor: 3 kW Saw: ø420 mm As zaagblad: ø40 mm Cutting height: 170mm Swivelling: 45° – 90° – 25° Tilting: 0° – 45° Stroke: 450 mm – 90° 310 mm – 45 ° Saw: ø420 40 48 WZ Neg. (used) Machine stand: Inclusive
Graule RO-ST60 Roltafel met aanslag en pneumatische rem Merk: Graule Type: RO-ST60 Lengte: 3.0 meter (netto) Maat instelling: Grof en fijn verstelling Nauwkeurigheid: 0.1 mm Condition: functional checked
연도: 2017 - 기술적으로 효율적이며, 완전 서비스 후 즉시 작업 가능 - 디스크 직경: 420 mm - 냉각 설치 - 양면 공압 클램프 - 유압 공급 제동 - 압력 감압기
연도: 2006 - 기술적으로 효율적이며, 완전 서비스 후 즉시 작업 가능 - 모터: 3 kW - 두 절단 디스크 모두 +/- 45도 기울일 수 있습니다 - 절단 디스크: 450 mm (수직), 400 mm (수평) - 냉각 및 윤활 시스템 - 압축 공기 준비 스테이션 - 두 축에 대한 전자 각도 지시기
연도: 2016 - 기술적으로 효율적이며, 완전 서비스 후 즉시 작업 가능 - 모터: 3 kW/400V - 밀링 직경: 250 mm - 밀링 폭: 305 mm - 재료 스톱은 최대 20°까지 양방향으로 회전 가능함 - 수직 및 수평 공압 프로파일 클램핑 - 압축 공기 준비 스테이션 - 냉각 및 윤활 시스템
- 400 볼트, 브레이크가 있는 3상 모터, 2kW - 420mm 디스크 - 절단 높이 170mm - 절단 길이 410mm - 유압 공급 브레이크 - 냉각 시스템 - 압축 공기 준비 스테이션 - 양쪽에 공압
Number of motors: 1 Stück 0: , mm Control: , 0 cutting width: 115 und 82 mm Cutting height: 55 mm Motor output: 2.0 kW machine weight ab.: 45 kg Graule KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----------------------------------------------- Brief manufacturers description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----------------------------------------------- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Ma ...
saw blade diameter: 350 x Ø 30/40 mm cutting diameter: 135 mm cutting length: 430 mm dimensions of saw-blade: 350x3,0/2,4x40 mm turning speeds: 3800 U/min Dust suction hood: 100 mm total power requirement: 3,0 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 10 ...
saw blade diameter: 520 x Ø 50 mm cutting diameter: 200 mm cutting length: 420 mm Cutting height at 45°: 140 mm dimensions of saw-blade: 520x3,6/3,0x50 mm turning speeds: 2800 U/min Dust suction hood: 100 mm total power requirement: 3,0 kW weight of the machine ca.: 310 kg. range L-W-H: 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) ...
saw blade diameter: 420 x Ø 40 mm cutting diameter: 170 mm cutting length: 410 mm dimensions of saw-blade: 420x3,2/2,4x40 mm turning speeds: 3500 U/min Dust suction hood: 100 mm total power requirement: 3,0 kW weight of the machine ca.: 120 kg dimensions of the machine ca.: 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. ad ...
절단 폭: 90: 410 / 45:290 mm, 절단 높이: 170 mm, 절단 높이 45: 115 mm, 톱날 직경: 420 mm, 기계 중량 배: 150 kg, 톱날: 40 mm, 톱날, 회전 속도: 3350 U/min 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.
절단 폭: 90: 410 / 45:290 mm, 절단 높이: 170 mm, 절단 높이 45: 115 mm, 톱날 직경: 420 mm, 기계 중량 배: 150 kg, 톱날: 40 mm, 톱날, 회전 속도: 3350 U/min 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.
cutting hight at 90°: 200 mm; cutting width: 410 mm; miter square horizontal: 45° - 90° - 25°; miter square vertical: 60° - 90° -30°; roller convoyer/ supporting table: no; saw blade diameter: 520 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: Gewicht: 300kg; crosscut and miter saw Typ ZS 200 N compact and clear saw to cut large-format cross section this machine is characterized by following properties: †clarity by cutting process because saw blade arranged above †extremely large cutting area with a compact and stable structure â€Â powerful 5 kw three-phase motor with automatic star delta start †fast miter adjustment - horizontal meter range of 45° †90° †25° - vertical meter range of ca. 60° †90° †30° - acu ...
Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide
Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: Cutting length: max. 380 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Technical data: Motor: 1.5 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: Motor: 2 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
Key data: 420 mm, 170 mm, 115 mm
400볼트 3상 제동 모터 톱날 직경 420 mm, 톱날 홀더 40 mm, 절단 높이 170 mm, 톱날은 45°로 기울어짐: 절단 높이 115 mm, 절단 길이 410mm 포함: 기계는 손으로 크랭크를 통해 양쪽 앞쪽에서 기울일 수 있습니다 3kW 400볼트 모터에 대한 추가 가격 유압 공급 브레이크 레이저 설치 프네움. 양쪽 모두에서 위에서 보듯 긴장감이 있었다 카바이드 원형 톱날 420x3.4/2.4 x40 mm 48 WZ 네거티브 기계 스탠드
