금속 작업 기계 / 밀링 머신 / 라운드 테이블 밀링 머신
생산자: DMG MORI
모델:DMU 50
기계의 유형: 라운드 테이블 밀링 머신
품목 아니오.: 168832134
양: 1
날짜: 10.03.2026
위치:
독일
값:
Seller-item-No.:011204
| General | |
| Universal Milling Machine; Control: CELOS X with Siemens 840D SL Operate | |
| Working area 1 | |
| Longitudinal | 650 mm |
| Cross | 520 mm |
| Vertical | 475 mm |
| Technical Data | |
| Type of main drive | AC |
| Drive power (100% DC) | 16 kW |
| Drive power (40% DC) | 21 kW |
| Speed range | 20 - 15000 rpm |
| Spindle taper | HSK-A 63 |
| Clamping System | HSK-A 63 |
| Feed rate longitudinal/transverse/vertical | -42000/-42000/-42000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 42/42/42 m/min |
| Floor space/Weight | |
| Dimensions (L x W x H) | 2,85 x 2,35 x 2,75 m |
| Weight approx. | 7500 Kg |
| Direct measuring system | Direct path measuring system |
| Toolchanger | toolchanger |
| Benefit Package | Benefit Package consisting of: Swarf conveyor, with cleaned slot screen Internal coolant supply 40bar/600l Air blast through spindle centre Application Tuning Cycle 3D quickSET (pre selection, measuring probe) |
| Max. tool dia. with free neighbouring pockets 130 mm | |
| Max. tool diameter with occupied adjacent pockets 80 mm | |
| Max. tool length 300 mm | |
| Max. tool weight 8 Kg | |
| Number of tools 60 | |
| Type of gripper Double gripper | |
| Type of magazine Chain | |
| Spindle speed 15,000 rpm | Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| NC swivel rotary table | Swivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation |
| Version Rotary joint, 4 channels, outside of table | Rotary joint connections on the face side for pneumatics or hydraulics in rotary table with swivel axis, 4 channels version Media connection on the face side of the table |
| Rotary joint, 4 channels, (single option) | Rotary joint 4 channels as single Option; Execution of the option depending on the selection the rotary joint version; Not in connection with one Automation interface or clamping option selectable |
| Tool magazine 60 pockets | Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading |
| Swarf conveyor, with cleaned slot screen | Swarf conveyor, scraper type with cleaned slot screen |
| Internal coolant supply 40bar/600l | Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. cabin roof, rotary joint in spindle, double cartridge filter 50µm for internal coolant (differently from standard) |
| Coolant-air blast change-over | Coolant - Air-blast changeover external switchable via M-Function |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, maintained air with low oil rate |
| Chip flushing for working area | Chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by M function´s (only in combination with internal coolant supply, not with 20 bar ICS) |
| Rotating clear-view window | Rotating clear-view window (only available with option cabin roof) |
| Oil- and emulsion mist separator mechanical | Oil and emulsion mist separator mechanical filter system 1100 m³/h (only available with option cabin roof) |
| Infrared measuring probe PP60 optical | Infrared touch Probe make Renishaw PP 60 optical (OMP 60) |
| Laser tool measuring BLUM DIGILOG | Laser tool measuring Blum DIGILOG fix mounted at machine column modified construction, note interference contour! Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with taper |
| 3D Quick SET | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe) |
| MPC - Machine Protection Control | MPC - Machine Protection Control Machine protection by quick shutdown |
| Signal lamp 4-colour | Signal lamp, 4 colours |
| ATC (Application Tuning Cycle) | ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed |
| 3D data model | 3D data model in STEP format for integration in CAD System by the customer. It is used for machine simulation. (shipping against signed non disclosure agreement) |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| 2013 | DMG MORI | DMU 75 monoBLOCK | |
| DMG MORI | DMU 40 | ||
| DMG MORI | DMU 40 | ||
| 2025 | DMG MORI | DMU 40 evo | |
| DMG MORI | DMU 40 | ||
| DMG MORI | DMU 40 eVo | ||
| 2014 | DMG MORI | DMU 40 EVO | |
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 75 monoBLOCK | ||
| 2012 | DMG MORI | DMU 40 eVo |
| 2015 | DMG MORI | DMU 50 | 125000 EUR | [Jan 2019] |
| 2014 | DMG MORI | DMU 50 Ecoline | 49170 EUR | [Dec 2024] |
| 2010 | DMG MORI | DMU 40 MONOBLOCK | 115000 EUR | [Nov 2019] |
| 2021 | DMG MORI | DMU 50 2nd generation | 130000 EUR | [Nov 2024] |
| 2020 | DMG MORI | DMU 65 monoBLOCK 5-Axis | 82400 EUR | [Nov 2024] |
