하위 범주
(3 카테고리 레벨)
생산자:
(범주: 106)
Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.
우리는 이 모든 기계를 패키지로 판매할 것입니다. 1x 프레스 브레이크 160-3m 1x 프레스 브레이크 60-2m 1x KRC 150 로봇 Kuka 로봇과 Fronius TPS4000가 있는 용접 로봇 셀 1개 1x 미크론
스트로크 : 135mm, 최대 시트 두께 : 20mm, 최대 굽힘 길이 : 3050mm, 가압력 : 80t, 최대 작동 압력 : 2975psi, 최대 다이 개구부 : 250mm, 벤딩 각도 범위 : 1-42, 오일 용량 : 150L, 최대 공구 중량 상부 / 하부 : 40kg / 115kg. 기계 치수 X/Y/Z: 약. 4000mm/2050mm/2450mm, 무게: 약. 6000kg. 문서를 사용할 수 있습니다. 현장 점검이 가능합니다.
기술: 사이클 피드가 있는 유압 단일 컬럼 프레스 유형: HEP 100 사양 전기 연결: 400볼트/50Hz +/- 3% 구동력: 5.5kW 총 전력 요구 사항: 약. 6.5kW 제어 전압: 24볼트/50Hz +/- 3% 하이드릭. 최대 연결: 210 bar 세트: 200bar 성능 데이터 램 속도 AB: 약 48mm/초 최대 100kN의 압축력 작업 속도 AB 감소 조정 가능: 약 10mm/초 최대 100kN의 압축력 램 속도 ON 약 96mm/초 최대 약 50kN의 후퇴력 플런저 스트로크: 최대 200mm 펌프의 유량: 약. 15 l/min.
싱글 컬럼 프레스 덩크 유형: HZS 160 사양: 제조사: 덩크 모델: HZS 160 영업시간: 약 2250시간 기계는 양호한 상태이며 완벽하게 작동합니다.
Knuth에서 유통하는 Durmazlar 프레스 브레이크를 사용할 수 있습니다. 가압력: 35t, 굽힘 길이: 1350mm, 모터 출력: 5.5kW, 스트로크: 100mm, 스트로크 속도: 17/min, 최대 작동 압력: 240bar, 오일 용량: 150l. 기계 치수 X/Y/Z: 약. 1400mm/1400mm/2100mm, 무게: 약. 1750kg, 작동 시간: 1258시간. 현장 점검이 가능합니다.
- 압력 용량: 22 t - 투영: 175mm - 스트로크: 120 1/분 - 플런저 조정: 50mm - 테이블 높이 조절 50mm - 스트로크 조정: 8-80mm - 테이블: 520 x 400mm - 플런저: 250 x 160mm - 트러니언 클램핑이 있는 턴버클, D35mm - 모터 출력 1.5kW - 매우 부드러운 주행 - 로터리 웨지 커플링의 기계적 분리 공압 공압 실린더 - 공압 풋 스위치 - UVV 없음 - 기계 다리 4개 - 연결 케이블 CEE 플러그 16A - 퀵 커플링을 통한 공기 연결 - 무게: 약 2,000kg - 크기: 너비 820 x 깊이 1100 x 높이 1800mm
Key data: 630 t, 275 mm
판매용은 중고 하강 프레스, 제조업체 Sack + Kiesselbach, 유형 EP 630입니다. 기계의 상태는 매우 양호합니다. 프레스는 조각 회사에서 테스트 프레스로 일했습니다. 기술 데이터: 가압력: 최대 630톤. 설치 높이: 최대 325mm 스트로크: 최대 275mm 무게: 4,000kg
Key data: 100 t
편심 프레스로의 전환에 따른 판매 가압력 100톤 적재 깊이 360mm 스트로크 500 mm 일광 800mm 플런저 면적 530 × 400 mm 바닥 위 테이블 높이 710mm 작업 속도 10mm/초 접근 속도 150mm/sec 복귀 속도 150mm/sec 필요한 전력 17kW 치수 L x W x H 1,400 x 2,000 x 3,200 mm 기계 무게 약 5.1 t 제조 연도 2001 가격은 순이며 VAT를 청구할 수 있습니다. 적재 시설 이용 가능 보증이 없는 모든 정보
게브르. 굽힘 후 프레스 Fabr. Graebener, 유형 GRNM, YOC 2005 최대 절곡력 16 t. 공구 길이 1,600 mm 언더스윙 조정, 유압식 2 실린더 크기 5080 x 3290 x 2540mm Kj Uovvlllerhyxkenb 무게 65t.
가압력: 4000kN, 가압: 320bar, 오일 압력: 250bar, 블랭크 홀더 힘: 1600kN, 블랭크 홀더 스트로크: 200mm, 블랭크 홀더 치수 X/Y: 1000mm/800mm, 블랭크 홀더 이젝터 힘: 160kN, 이젝터 힘: 63kN, 이젝터 스트로크: 100mm, 오버런 거리: 40mm, 오버런 시간: 190ms. 문서를 사용할 수 있습니다. 현장 점검이 가능합니다.
pressure: 20 tthroat: 200 mmstroke: 0 - 50 mmtable:: 360 x 550 mmtable:: 140 mm - Bohrung no. of strokes: 160 Hub/minbore: 35,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 240 mmtotal power requirement: 2,2 kWweight: 1.250 kgrange L-W-H: 1310 x 1250 x 1860 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20,0 tstroke: 185 mmtable surface area: 170 mm Breitecolumn travel between the guideways: 510 mmweight of the machine ca.: 112 kgdimensions of the machine ca.: 1630 x 560 x 730 mmFurnishing:- Standard with pressure cylinder that can be moved to the left and right- For aligning, pressing, bending, assembling gears, discs, etc.- Standard with foot pedal and hydraulic hand pump for piston delivery- Standard with support prism for aligning shafts- With automatic piston retraction by integrated return spring as standard- Height-adjustable press table with locking bolts- Large manometer for reading the compressive force- Including two-stage hydraulic pump- Robust construction with welded steel frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tstroke: 150 mmtable surface area: 185 mm Breitecolumn travel between the guideways: 530 mmweight of the machine ca.: 162 kgdimensions of the machine ca.: 800 x 700 x 1805 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 50 tstroke: 200 mmtable surface area: 730 x 205 mmdayligth: 1050 mmcolumn travel between the guideways: 730 mmweight of the machine ca.: 288 kg.Description :- Standard with cable winch- for easy height adjustment of the support table- Piston delivery either manually or pneumatically- Powerful workshop presses for craft and repair businesses- Optimum price-performance ratio thanks to rational design- The standard foot pedal keeps your hands free for the workpiece- Increased range of application thanks to the optionally. available pressure mandrel set (10 pieces).- Pressure cylinder with integrated return spring for piston return- Welded steel frame for heavy use and high stability- Versatile in use thanks to the pressure cylinder that can. be moved to the left and rightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 100 mm/secreturn speed: 75,0 mm/secwork speed: 7,0 mm/minwork stroke: 180 mmdayligth: 415 mmoil volume: 200 ltr.table height: 900 mmvoltage: 400 Voltrange L-W-H: 4450x2050x2650 mmFurnishing:- DELEM - CNC control model DA-58T- controlled axes: Y1 - Y2 and X- FIESSLER AKAS - laser protection in front of the machine- Deer foot upper tool- Universal die block- manual table crowning- Safety device: light barrier behind the machine- 2 front support arms- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- CE mark / declaration of conformity- Operating manual: machine and control- Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 400 tchamfer lenght: 4100 mmdistance between columns: 3550 mmcolumn arm: 510 mmram stroke speed: 110 mm/secwork speed: 8.4 mm/secreturn speed: 130 mm/secwork stroke: 375 mmdayligth: 650 mmtable height: 1000 mmtable width: 240 mmback stop - adjustable: max. 800 mmoil volume: 400 ltr.voltage: 400 Volttotal power requirement: 30.0 kWweight: 26409 kgrange L-W-H: 5450 x 2650 x 3470 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot ...
pressure: 40.0 tstroke: 285 mmflat steel: 250 x 24 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 660 x 1250 mmtotal power requirement: 4.0 kWmotor: 400 Volt 50 Hzoil volume: 40.0 lweight: 800 kgrange L-W-H: 1450 x 800 x 1300 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20.0 tstroke: 185 mmflat steel: 200 x 12 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 480 x 1060 mmtotal power requirement: 2.2 kWmotor: 400 Volt 50 Hzoil volume: 12.0 ltr.weight: 530 kgrange L-W-H: 1150 x 480 x 1400 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 120 mmajustment speed: 70.0 mm/secworking feed: 7.0 mm/secreturn speed: 60.0 mm/secdayligth: 325 mmtable width: 180 mmwork height max.: 915 mmoil volume: 150 ltr.total power requirement: 12.5 kWweight of the machine ca.: 9100 kg.range L-W-H: 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop ()Equipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electro-motor-driven back stop, with ball screws (X axis) with 2x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) with digital position display- swiveling operation, left-hand side- split deer foot + pointing tool- 1x rotatable Multi V univers ...
Stäubli 로봇 셀 프레스가 있는 프레스 브레이크 제조사: LA G 모델: GBS R 1250 50 기계는 매우 짧은 기간 동안만 사용되었습니다.
pressure: 1000 tdistance between columns: 5000 mmstroke: 500 mmHeight of centres: 400 mmMotor output: kWreus: U/minOverall size: 6000 x 2500 mmWeight: 1000 kgDistance between centres: 3500 mmtotal power requirement: kWweight of the machine ca.: 220 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.
프레스 디자인 구동 시스템: 유압 프레임 설계: C-프레임, 단면 프레스 힘 총 힘(공칭): 12 toSLIDE 스트로크: 200mm전기 사양 주전원 전압: 380V 주전원 주파수: 50Hz치수/중량 총 중량 약: 1000kg시간 카운터: 30'181 hlast 안전 점검: 27.07.2023, 오버런 시간 38ms, 오버런 거리 60mm
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNmPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mmSLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 555 mm distance between columns (H-frame): 2060 mm passline opening (free passage in side columns): 1060 ...
pressure: 60 tthroat: 280 mmstroke: 10-140 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 740x560 mmram surface: 380x195 mmhole in the table: 300x200 mmtable height: 760 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 tthroat: 220 mmstroke: 8-96 mmno. of strokes: 120 Hub/minram - range of adjustment: 50 mmtable surface area: 580x440 mmram surface: 305x170 mmhole in the table: 215x175 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 tthroat: 230 mmstroke: 4-80 mmno. of strokes: 120 Hub/minram - range of adjustment: 55 mmtable surface area: 695x455 mmram surface: 365x180 mmhole in the table: 220x180 mmtable height: 890 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
