하위 범주
(3 카테고리 레벨)
생산자:
(범주: 106)
pressure: 25 tthroat: 250 mmstroke: 100 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 1000 x 1700 x 2600 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tpassage width: NA mmstroke: 180 mmtable length: 690 mmtable width: 530 mmdistance between columns: 420 mmtotal power requirement: 18 kWweight of the machine ca.: tdimensions of the machine ca.: mHydr. 4-Pillar Press for Embossing/CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 3 tthroat: 0 mmstroke: 200 mmtotal power requirement: 15 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mFully Automatically Straightening Press, 3 Stations,parts turning, (bolts)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 tcolumn daylight: 2600 mmstroke: 800 mmtable surface area: 6000 x 3000 mm: max. 800 mmadjustment of press crosshead: 5200 mmslide adjustment -horizontal: 1800 mmCapacity: 162 l/minfeed down: 9 mm/secfeed up: 14 mm/sectotal power requirement: 45 kWweight of the machine ca.: 50 t- Hydraulics : Rexroth- Controls : Tailor- Cylinder chromed- Operation via remote control & joystick- Stroke length adjustable via sensors- Pressure adjustable via PLCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 26,0 kNstroke: 60 mmthroat: 110 mmWorking height from to: 70 - 250 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 46 Kgdimensions: 310 x 140 x 475 mmKnee lever hand presses SPECIAL PRICE!HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear withcomfortable and easy to adjust with a side crank.Stand height 475 mmEven more pressure in production without additional effort.Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology.Particularly stable construction of the spindle head and columnThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 tthroat: 0 mmstroke: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mD U N K E S (Germany)CNC Controlled Hydraulic Double Column PressModel HD 10Year 1993________________________________________________________Pressure 10 tons Ram stroke 400 mmMounting height 600 mmTable size 400 x 300 mmTable height above floor 820 mmRam area 400 x 300 mmRam bore 40 mmQuickspeed, downwards, max. 70 mm/sWorking speed, downwards, using max. pressure 40 mm/sWorking speed, min. 5 mm/sWorking speed adjustable from ...
오퍼 24591 사양: - 최대 가압력 25 t - 최대 램 스트로크 500mm - 리프팅 속도 0 - 40mm/s - 복귀 0 - 200 m/min - 설치 높이 800 mm - 램 중앙으로의 투영 360mm - 푸셔 클램핑 표면 440 x 360 mm - 플런저 클램핑 핀 40mm - 테이블 크기 630 x 500 mm - 바닥 위 테이블 높이 710mm - 열성형력 10 t - 최대 딥 드로잉 깊이 160mm - 드라이브 400 V / 4 kW - 필요한 공간 약. 너비 800 x 높이 2720 x 깊이 1150 mm - 무게 약. 2500 킬로그
pressure: 200 ttable length: 2500 mmtable width: 1800 mmtable travel: 2700 mmdayligth: 2250 mmupper clamping surface:: 1800x2500 column base area: 1900 mmtotal power requirement: 22 KWweight of the machine ca.: 30 tdimensions of the machine ca.: . mNominal force: 1000 kNTop plate pivotsTable is movableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created w ...
제안 25100 사양: - 압력 용량 200 t - 작업 폭 3050 mm - 수직 사이의 통로 2550mm - 테이블 너비 180 mm - 프로젝션 250mm - 설치 높이 400mm - 이송 속도 80 mm/sec. - 작업속도 6.7 mm/sec - 후퇴 속도 67mm/초 - 플런저 스트로크 150mm - 조정 범위: 고정 스톱: 120mm - 구동 400V 14.5kW - 필요한 공간 약. 너비 3800 x 높이 2980 x 깊이 1700 mm - 무게 약. 11,500kg - 포함: - 2개의 스톱 핑거가 있는 백 게이지 - 사슴의 발 도구 - 4중 범용 다이 - 양손 제어 패널, 풋 스위치,
pressure: 80 tthroat: 280 mmstroke: 10-100 mmno. of strokes: 52/80 Hub/minram - range of adjustment: 60 mmtable surface area: 850x550mm mmram surface: 420x220 mmhole in the table: 300x200 mmtable height: 780 mmtool hole in ram: Ø 45 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: 2000x2000x2700mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 180 tchamfer lenght: 3050 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 150 mmreturn speed: 65 mm/secajustment speed: 50 mm/secwork height max.: 1010 mmoil volume: 150 ltotal power requirement: 11 kWweight of the machine ca.: 9500 kgdimensions: 3100 x 1750 x 2850 mmFurnishing:- DELEM CNC control DA65- controlled axes: Y1 + Y2 + X + R- Electric crowning device WILA, controlled via CNC- Electric back stop, travel range 600 mm- hydr. Upper tool holder WILA- hydr. WILA lower tool holder- front laser protection device FIESSLER- 5x manually adjustable stop fingers, foldable- 2x front support arms sliding system”- side + back protection device- Hand and foot controls- Operation manual?The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 ttable length: 1250 mmtable width: 900 mmtable travel: 1200 mmdayligth: 700 mmupper clamping surface:: 1000x1200 total power requirement: KVAweight of the machine ca.: 12 tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력: 35t모따기 길이: 2000mm기계 무게 ca: 3t총 전력 요구 사항: kW열 간 거리: mm기계 치수: m압력 35to최대 굽힘 길이 2000mm피뢰기 구동용량 4,5kW무게 3000kg
pressure: 1 tStroke: 315 mmtable surface area: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
최대 펀치 높이: 90mm 위더 스트로크 : 100 mm 펀칭 스트로크 : 20mm 가압력: 30kN 최대 프로파일 높이: 100 mm 중량: 약 280kg
pressure: 150 tchamfer lenght: 4300 mmdistance between columns: 3700 mmram stroke speed: 100 mm/secworking feed: 8 mm/secreturn speed: 80 mm/secstroke: 175 mmtable height: 920 mmControl: DELEM DA 52 total power requirement: 11 kWweight of the machine ca.: 15000 kgdimensions of the machine ca.: 4800 x 1700 x 2850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
일반 제조사: Transmatic 유형: TS-3M 제조 연도: 2007년 접시 크기: 38 x 38cm 최대 압력: 600g/cm2 온도 설정: 50 – 305°C 조건 상태: 사용 된 기능: 테스트 완료 및 완전한 기능
pressure: 6,3 tthroat: 200 mmstroke: 200 mmdayligth: 600 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,78 tdimensions of the machine ca.: - mHydraulic Press 63 kNStroke 200 mm, Throat 200 mm, feed rate: down 165 (28) mm/s, up 510 mm/s. Wheight 780 kg.Workspace: Table 450 x 380Drive: 2.2Movie: https://www.youtube.com/watch?v=tcxXfKlrFLYThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 5 mmshaft length: 40 mmcutting lenght max.: 56 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mData on the machine type:Double-pressure rotor pressApplication: Screw productionMake: HilgelandYear of manufacture: 1990Max. wire diameter: 5 mmMax. shaft length: 40 mmMax. wire section length: 56 mmMax. output: 600 pieces/minMachine is fully operationalViewing possible by appointmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
수량 1 중고 압출 프레스 라인 – 보관 중 – 설치되지 않았습니다! Mfc.: 한국 제조사 힘: 1650 UST 건조: 2024 유형: 직접적인 단 하나 활동 수평한 짧은 치기 뒤 선적 알루미늄 유압: Rexroth PLC: Mitsubishi 빌렛의 직경 : 152 mm (6 인치) 길이 : 400 – 750 mm 콘테이너의 크기: Φ157 mm × 800 mm 출구 구멍의 크기: Φ180 × 250 mm 용기 크기 내경: 164mm(6인치) 길이: 700mm 메인 램 스트로크 : 1200mm 공급 범위: Loading Lift System Billet Pushing Induction heatingFurnace Billet Conveyor 배출용 Billet Feeding into Press Cooling System 핫 쏘 런아웃 테이블 더블 풀러 스트레처 마감 톱 다이 용광로 노화
pressure: 100 tstroke: 400 mmtable surface area: 920 x 560 mmdayligth: 900 mmdistance between columns: 300 mmHeads: 175x115 mmfeed down: 7,6 mm/secfeed up: 13,4 mm/sectotal power requirement: 4,0 kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: 1600x850x2450 mmDomestic equipments:- Stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material requirements - CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tthroat: 350 mmstroke: 130 mmstroke of worktool slide: 3070 Hub/minram adjustment: 100 mmram surface: 500x300 mmtable surface area: 1000x600 mmfeed - rapid adjustment: total power requirement: kWweight of the machine ca.: 9,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력 : 20 t스트로크 : 150 mm일간 : 700 mm전체 크기 : 670x870x1900 mm기계 무게 ca : 200 kg국내 장비 : 안정적인 용접 구조 - 핸드 레버를 통한 수동 - 압력 게이지를 통한 압력 게이지 - CE 마
pressure: 120 tstroke: 400 mmdayligth: 900 mmfeed down: 5,8 mm/secfeed up: 9,5 mm/secHeads: 200x125 mmtotal power requirement: 6 kWweight of the machine ca.: 1250 kgdimensions of the machine ca.: 1900x1000x2450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tstroke: 400 mmFrame Width: 450 mmcolumn daylight: 1300 mmcylinder diameter: 170 mmwork height max.: 900 mmFront light range: 1400 mmLateral light range: 450 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2600 kgdimensions of the machine ca.: 2500x1100x2800 mmAccessories / equipment:- stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material supports adjustable in height by cylinder- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 tstroke: 400 mmdayligth: 900 mmHeads: 225x135 mmfeed down: 6,2 mm/secfeed up: 9,8 mm/sectotal power requirement: 6 kWweight of the machine ca.: 1.300 kgdimensions of the machine ca.: 1640x1000x2550 mmAccessories / equipment:- stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material supports adjustable in height by cylinder- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tstroke: 400 mmtotal power requirement: 4,0 kW: 7,4 mm/s: 11,5 mm/sHeads: 160x95 mmweight of the machine ca.: 725 kgdimensions of the machine ca.: 1560x850x2400 mmDomestic equipments:- Stable welded construction- Pressure cylinder laterally adjustable- Electric control via lever / manual over hand lever- Pressure gauge via pressure gauge- Material supports per cylinder in the height adjustable- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 60 tostroke: 400 mmdayligth: 900 mmHeads: 150x95 mmfeed up: 5,6 mm/secfeed down: 9,4 mm/secweight of the machine ca.: 700 kgtotal power requirement: 4 kWOverall size: 1460x850x2400 mmFurther information:stable welded constructionPrinting cylinder adjustableOperation electrically via shift lever / manually via hand leverPressure display by manometerHeight of material supports adjustable by cylinderCE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
