테이블 크기 (x-y/mm) 2150 x 1200 슬라이드 크기 X-Y (mm) 2000 x 1200 스트로크(mm) 300 슬라이드 조정 (mm) 200 분당 스트로크 5 - 50 측면 창 치수 (x-y/mm) 800
100 € 감시 목록에 추가
• Pneumatic press • Table dimensions 125 x 125 mm • Actuating by pedal • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 600 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-48426-118
NIDEC ARISA S-2-500-240-120-FD 기계식 프레스는 2006년 스페인의 Nidec Press & Automation Co.(NP&A)에서 제작되었습니다. 이 프레스는 자동차 또는 기계 산업의 부품 연속 생산에 사용되는 매우 다재다능한 프레스입니다. 이 장치는 가장 까다로운 금속 성형 작업, 즉 금속 부품의 정밀한 천공과 스탬핑도 가능하게 합니다. 표준 목적 외에도, 적절한 금형 및 재료 공급 시스템을 갖추고 있으면 이 기계는 전사 프레스나 프로그레시브 프레스로도 사용할 수 있습니다. 모든 공정은 500톤의 높은 압력력으로 수행됩니다. NIDEC ARISA S-2-500-240-120-FD 프레스의 구동 시스템은 플라이휠과 이센트릭 기어를 기반으로 하며, 두 개의 커넥팅 로드와 협력합니다. 이 솔루션은 고르게 토크 전달과 원활한 작동 ...
ARISA S-2-630-240-120-LD 기계식 프레스는 2005년 스페인 Arisa S.A.(현재 Nidec Press & Automation Co.(NP&A))에서 제작되었습니다. 제공되는 기계는 광범위한 자동차 또는 기계 산업에서 사용되는 부품의 시리즈 생산에 훌륭한 선택입니다. 정밀한 천공 및 스탬핑과 같은 가장 까다로운 금속 성형 작업도 가능하게 합니다. 표준 목적 외에도, 사용되는 금형 및 재료 공급 시스템에 따라 이 기계는 이동 프레스 또는 프로그레시브 프레스로도 사용될 수 있습니다. 모든 가공 공정은 630톤의 높은 프레스력으로 수행됩니다. 구동 시스템은 플라이휠과 이센트릭 기어 형태로 두 개의 커넥팅 로드와 협력하여 고르는 토크 전달과 슬라이더 움직임의 부드럽게 제어합니다. 반면 슬라이더는 롤러 가이드 ...
ARISA S-2-400-260-FD 기계식 프레스는 2000년 스페인 Arisa S.A.(현재 Nidec Press & Automation Co.(NP&A))에서 제작되었습니다. 제공되는 기계는 광범위한 자동차 또는 기계 산업에서 사용되는 부품의 시리즈 생산에 훌륭한 선택입니다. 금속 부품의 정밀한 천공과 스탬핑이 가능합니다. 이 모든 가공 공정은 최대 400톤의 높은 프레스력으로 수행되며, 매우 역동적인 슬라이더와 결합되어 최고의 가공 결과를 보장합니다. ARISA S-2-400-260-FD는 개방형 측면 벽을 가진 견고하고 응력 완화 방식의 갠트리 디자인을 특징으로 합니다. 이 설계는 높은 압력력이 있는 가장 강도 높은 작업에서도 높은 강성, 안정적인 매개변수, 반복성을 유지합니다. 이 기어는 두 개의 연결봉, 플라이휠 구동과 이심 피니 ...
Ajax 1,000 톤 스트레이트 사이드 기계 단조 프레스 신호 : 번호 : 4410 10" 치기 33" 셧 높이 36" x 36" 침대 분당 80 스트로크 부분적으로 재건됨 Ajax 1,000 톤 스트레이트 사이드 기계 단조 프레스 신호 : 번호 : 4621 10" 치기 32" 셧 높이 36" x 32" 침대 분당 80 스트로크 볼스터가 포함되어 있습니다. 두 프레스 모두 작동 상태이며 전원이 공급되고 있습니다.
사용
Qty. 1 알루미늄 냄비 및 디스크 생산을위한 중고 프레스 Mfc.: SITI 건축하는: 전문가에 의해 안으로 갱신된 2005년 기간: 3-4 달 힘: 알루미늄 원판 & 유도 & 정상적인 화분의 4000 톤 생산 냄비 높이 : 120 / 140 mm 언론은 아래에 명시된 대로 정비되고 개조되고 판매될 것입니다: 실린더의 새로운 피스톤 연삭 새로운 플랜지 테이블 수정 새로운 펌프 새로운 개스킷 등. 새로운 전기 및 전자 부품 새로운 프로그
99.000 € 감시 목록에 추가
As good as new machine Operating hours in motion: 29.5 Hour meter: 2244 Strokes: 159328 incl. interchangeable decoiling device, strip straightener and Scrap ejection. Mains voltage: 3LNPE/400V/50Hz Control: Beckhoff/PNOZ multi Electrical wiring diagram: E$-M02070 Pre-fuse: 160 A Nominal power: 37 KW Nominal force: 2000 KN Working capacity: 16000 J Stroke rate in continuous stroke: 30-150 min-1 Max. stroke rate in single stroke: 30 min-1 Max. clutch cycles in single stroke: 20 per min Runtime: 0.158 s Min. safety distance: 317 mm Clutch pressure: 5.0 bar System pressure: 6.0 bar Stroke length: 20-220 mm Max. plunger adjustment: 150 mm Usual stopping point of the ram: OU Table dimensions: 1800x1100 Plunger dimension, max. tool dimension (WxD): 1800x1100 mm Max. weight tool top: 1700 kg Mass without additional equipment: 29000 kg Auction-ID: A1-48256-1
press capacity: 14,5 MNoperating pressure: 310 barstroke of press: 960 mmspeed: Press: max. 23 mm/sspeed: Press: nom. 17 mm/sExtrusion PressSMS - HyBrEx 14- Extrusion centerline above pass line: 1.000 mm- Extrusion height above pass line: 3.400 mmBILLET CONTAINER- Contact force: 1.4 MN- Retraction force: 1.0 MN- Retraction stroke: 1,155 mm- Bore diameter: 160 mm- Container length: 830 mm- Billet length, min. - max.: 250–800 mm- Shortest billet length (with billet shearing): 200 mmSHEARS- Shear, cutting force: 0.4 MN- Profile shear – tool slide, cutting force: 0.2 MNPROFILE CIRCLE / TOOL ASSEMBLY- Die backer opening – diameter: 190 mm- Die backer opening – width: 230 mm- Tool assembly – diameter: 330 / 277.5 mm- Tool assembly – height: 380 mmHYDRAULIC SYSTEMFour high-pressure oil pumps- Max. operating pressure: 310 bar- Drive power: 75 kWHigh-pressure variable-displacement pum ...
The Dorst TPA 20/3 is a reliable used powder compaction press known for its robust construction and precise operations. It offers a maximum pressing force of 200 kN and a withdrawal force of up to 100 kN. With a maximum filling height of 140 mm and pressing travel extending to 70 mm, it accommodates a range of powder compaction tasks efficiently. The press is capable of operating at speeds ranging from 5 to 22 strokes per minute, supporting a variety of production needs. It features an upper punch stroke of 200 mm, with an adjustable travel of 160 mm for flexibility across different applications. The machines air supply intake is approximately 160 liters per minute, and it has a connected load of about 15 kW. Constructed with dimensions of around 2000 mm in width, 1700 mm in depth, and 3250 mm in height, the Dorst TPA 20/3 weighs approximately 4,900 kg. It maintains a workplace sound lev ...
Press force: 1,200 tRam stroke: 600 mmRam adjustment: 600 mmStroke rate: approx. 9 strokes/minShut height: approx. 1,600 mmDrawing equipment:Drawing cushion force: approx. 225 tDrawing cushion stroke: approx. 200 mmPneumatic ejector in ram:Force: approx. 95 tStroke: approx. 150 mmHeavy-duty mechanical eccentric drawing press in robust double-column design from Schuler, designed for continuous industrial operation in the automotive sector.The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and an additional ram adjustment of 600 mm. The stroke rate is approx. 9 strokes per minute. The shut height is approx. 1,600 mm, allowing the processing of large-scale tools and components.Particularly noteworthy is the large working area with a table size of approx. 4,500 mm as well as a movable / sliding press table, which significantly facilitates setup and tool change an ...
Press force: 1,200 tRam stroke: 600 mmRam adjustment: 500 mmStroke rate: approx. 10 – 16 strokes/minShut height: approx. 1,250 mmDrawing equipment:Drawing cushion force: approx. 240 tDrawing cushion stroke: approx. 250 mmPneumatic ejector in ram:Force: approx. 95 tStroke: approx. 150 mmTable size: approx. 3,500 x 1,900 mmHeavy-duty mechanical eccentric press in robust double-column design from Schuler, suitable for industrial applications as well as classical forming and deep drawing processes.The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and a ram adjustment of 500 mm. The stroke rate ranges from approx. 10 to 16 strokes per minute, allowing flexible use depending on the application.The working area is designed with a table size of approx. 3,500 x 1,900 mm, offering sufficient space for medium to large tooling.A key feature is the movable / sliding pr ...
The Dorst TPA 70S is a used powder compaction press, known for its precise and reliable performance. It delivers a maximum pressing force of 700 kN with a withdrawal force of 400 kN, making it suitable for diverse compaction needs. The machine features a pressing travel of up to 30 mm, with a maximum filling height of 70 mm and operates at speeds between 14 to 40 strokes per minute. This ensures efficient throughput, ideal for high-demand production environments. With an upper punch stroke of 120 mm and adjustable travel of 200 mm, the Dorst TPA 70S offers flexibility in application. It requires a compressed air supply with an intake of approximately 200 liters per minute, and operates on a total connected load of about 20 kW. To enhance functionality, the machine is constructed robustly, maintaining a workplace-related sound level of 78 dB(A), and features a press housing capacity of 19 ...
The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...
The Dorst TPA 6 is a used mechanical powder compaction press suitable for various industrial applications due to its robust performance and flexibility. It boasts a maximum pressing force of 60 kN and a withdrawal force of 30 kN, addressing a wide range of compaction needs. The machine supports a maximum filling height of 70 mm and a pressing travel of 30 mm, with an upper punch stroke of 95 mm and an adjustable travel of 50 mm. This ensures precise control over the compaction process. Operating at speeds between 7 to 32 strokes per minute, the Dorst TPA 6 consumes approximately 70 liters of compressed air per minute and has a total connected load of about 3.5 kW. It measures 2220 mm in width, 1060 mm in depth, and 2250 mm in height, weighing around 1,200 kg. With a gear oil capacity of 12 liters and a workplace-related sound level of 75 dB(A), it is designed to endure continuous use whi ...
The Dorst TPA 50/4 is a reliable, used mechanical powder compaction press designed for precision and efficiency. Offering a robust maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, it supports a variety of powder compaction tasks. With a filling height up to 180 mm and a pressing stroke of up to 90 mm, this machine is adaptable to diverse requirements. Equipped with an upper punch stroke of 120 mm and an adjustable travel of 220 mm, the Dorst TPA 50/4 provides flexibility for different applications. It operates at a speed of 7 to 32 strokes per minute, ensuring efficient production. The press requires a compressed air supply, consuming approximately 200 liters per minute, with a total connected load of around 18 kW. Constructed with durability in mind, the press measures approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, and weighs around 5, ...
The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNmPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mmSLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 555 mm distance between columns (H-frame): 2060 mm passline opening (free passage in side columns): 1060 ...
The Dorst DK 250 is a robust used powder compaction press engineered by DORST, offering a substantial pressing force of up to 2500 kN. It supports operations with a maximum withdrawal force of 150 kN and a supporting force in the pressing position reaching 120 kN. Designed for precision, this model includes a 220 mm upper punch stroke with an adjustable travel of 120 mm. The press accommodates a pressing travel and withdrawal travel, each up to 50 mm, making it versatile for various pressing tasks. Operational performance ranges from 6 to 25 strokes per minute, and it provides a filling height of up to 100 mm. The Dorst DK 250 is efficient, consuming approximately 500 liters of air per minute and demanding a connected load of around 60.0 kW. Its dimensions, at 2500 mm in width, 1900 mm in depth, and 4800 mm in height, alongside a weight of approximately 18,500 kg, underscore its solid co ...
Mechanical Dorst TPA 45, Pressing Force max. 450 Kn, Withdrawal force max. 250 Kn, Supporting force in pressing position max. 130 Kn, Die return force max. 60 Kn, Upper punch stroke 120 mm, Upper punch adjusting travel 70 mm, Number of strokes 6-22 1/min, Filling height max. 120 mm, Pressing travel max. 60 mm, Withdrawal travel max. 60 mm, Top pressing travel max 6 mm, Upper punch pneumatic preload max. 30 mm, Compressed air supply , Air consumption , Intake air aprox. 70 l/min, Total connected load aprox. 14,0 Kw, Press dimensions:, Width aprox. 1550 mm, Depth aprox. 1650 mm, Height aprox. 2200 mm, Weight of the press aprox. 3900 Kg, Oil filling quantity :, Press housing 45 l (gear oil), Workplace-related sound 79 dB (A)
Pressing Force max.: 1000 Kn, Withdrawal force max.: 800 Kn, Supporting force in pressing position max.: 600 Kn, Die return force max.: 40 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 85 mm, Withdrawal travel max.: 95 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 80 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 23,0 Kw, Width aprox.: 1950 mm, Depth aprox.: 1550 mm, Height aprox.: 3900 mm, Weight of the press aprox.: 9.900 Kg, Press housing: 180 l (gear oil), Workplace-related sound: 78 dB (A)
Pressing Force max: 1400 Kn, Withdrawal force max: 1100 Kn, Die return force max: 70 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 220 mm, Number of strokes: 5-18 1/min, Filling height max: 180 mm, Pressing travel max: 90 mm, Withdrawal travel max: 90 mm, Top pressing travel max: 18 mm, Total connected load aprox: 25,0 Kw, Width aprox: 1950 mm, Depth aprox: 1750 mm, ISO 9001: 2008 CERTIFIED COMPANY, Height aprox: 4380 mm, Press housing: 240 l (gear oil), Workplace-related sound: 78 dB A
