하위 범주
(3 카테고리 레벨)
생산자:
(범주: 106)
가압력: 2000kN, 작업 폭: 3100mm, 기둥 통로: 3240mm, 최대 스트로크: 400mm, 목 깊이: 250mm, 최대 설치 높이: 965mm, NC 축: 11, 유압량: 550l, 기계 치수 X/Y: 약 4400mm/3400mm, 무게: 약 16600kg, 제어: Cyb-Tech Infinitron. 사용 가능한 설명서. 현장 점검이 가능합니다.
Machining center and extruded profile plant for car sill production, consisting of:, Processing machines:, - Anger machine SP2-X2000 (machine number AA100264-11), - Anger machine SP2-X2000 (machine number AA100264-12), - 2x coolant treatment, Assembly of components (robot cell for sills):, - Robot 1 KUKA KR120 R3200 PA, - Gripper for robot 1, - Labeling station, - Robot 2 KUKA KR120 R3500, - Gripper for robot 2, - Robot/machining center interface, - Cleaning unit for components, - Assembly machine 2 lanes, - Robots 3 and 4 for handling, - Drawer system with parts inserts, - Screwing station, - Adhesive application station, - Platform, - Robot 5, - Gripper for robot 5, - Pallet parking space, - Safety enclosure, - Electrical control and integration, Further information on request.
pressure: 40 tthroat: 225 mmstroke: mmtotal power requirement: 4,7 kWweight of the machine ca.: 3,45 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 tthroat: 250 mmstroke: 1280 mmtotal power requirement: 6,5 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력: 100 T샴퍼 길이: 2050 mm총 전력 요구 사항: 11 kW기계의 무게 ca.: 5,9 T기계의 크기 ca.: m- 램 조정: 150 mm- 램에서 테이블까지의 거리: 400 mm- 스트로크: 150 mm이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 생성되었습니다.
pressure: 1250 tchamfer lenght: 15000 mmdistance between columns: 10160 mmControl: CNC 10 Grafik total power requirement: kWweight of the machine ca.: 230 tdimensions of the machine ca.: 17000 x 5400 x 5900 m- Pressure: 1.250t- Bending length:15.000mm- Control: CNC 10 graphics- No. of axes axes: min. 10- Frame width: 10.160mm- Projection: 770mm- Table length: 15,000mm- Dimensions: 17,000mm x 5,400mm x 5,900mm- Mass: approx. 230tEquipment- Crowning device- CNC 10 control with graphics- Hydr. clamping of the upper tools- Multi-man operation- Increased speeds- Automatic height-adjustable rear sheet stop- die cushion device- Horn length 2,200 mm on both sidesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 tpiston stroke: 400 mmdiameter of piston: 300 / 185 mmthroat: 225 mmtable-size: 1150 x 350 mmspeed of pressing: 166 mm/secpre-running speed: 75 mm/secreturn speed: 208 mm/secweight: 26 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- speed of pressing: 16 ...6 mm / sec- advance: 75 mm / sec- rapid return: 208 mm / sec- distance between plunger with ram and locators: 320 mm- distance between locators of piston and table: 50 ... 888 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 3000 tchamfer lenght: 14000 mmdistance between columns: 10500 mmControl: CYBELECCNC 7000 m. Grafik table width: 1000 mmstroke: 1300 mmmin./max.distance between table and ram: 1800 mmcontrolled axis: Y1, Y2, X1, X2 total power requirement: kWweight of the machine ca.: mind. 465 tdimensions of the machine ca.: 14600 x 4200 x 7200 mm- throat depth: 700 mm- controlled axes: Y1, Y2, X1, X2- Dimensions (length x width x height):- Foundation depth for table: 3400 mm- Foundation depth for stand: 1700 mm- Dimensions of the individual components for transportation:- Table: 14020 x 4270 x 910 mm, weight approx. 125 tons- Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons- 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each- Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons- 2 pcs. Container 40” for cylinder, electrics and various attachments- Control sys ...
압력: 160 T샴퍼 길이: 3050 mm컬럼 간 거리: 2550 mm테이블 너비: 220 mm컬럼 암: 280 mm낮은길이: 440 mm작업 스트로크: 최대 250 mm총 전력 요구 사항: 22 kW기계의 무게 ca.: 13 t- Hubgeschw. / 스트로크 속도 : abwärts : 아래로, 90mm / s- 아래로 11mm / s- Aufw를 누릅니다. / 위쪽 : 90 mm / s- Spez / specif.: 2-Hand / Fuss-Bedienung / 2 -hand foot switch이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션 인 ModulMWS로 제작되었습니다.
nominal power: 63 tstroke rate in continuous stroke: 90 minforce: 2200 NmTorque: 12500 NmLabour performance: 5,5 kWsheet thickness - max.: 6,3 / 3,2 mmcutting surface: 1600 mm²distance between columns: 320 mmthroat: 315 mmmin. ram stroke: 8 mmmax. ram stroke: 120 mmram adjustment: 70 mmram surface: 400 x 500 mmtool hole in ram: 40 mmtool shank hole (depth x diameter): 92 mmT-slots: 2 Stktotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력: 250 tthroat: 360 mm테이블 치수: 1250 x 630 mm테이블 직경: 250 mm램 치수: 850 x 450 mm낮 길이: 800 mm피스톤 스트로크: bis 500 mm피스톤 직경: 400/360 mmram 스트로크 속도: abwärts 200 mm/secram 스트로크 속도: aufwärts 110 mm/sec총 전력 요구 사항: 20,5 kW기계의 무게 ca.: 8 t기계의 치수 ca.: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 제작되었습니다.
pressure: 100 tstroke: 380 mmtable surface area: 1740 x 996 mmpressure: 258 barajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/secdayligth: 700 mmtable height: 720 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1685 kg- Manually movable portal- Movable cylinder manually (left - right)- Cylinder extension up to the table- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Joystick to move the piston up / down- Hand pump for precision workThese straightening presses are equipped with a movable cylinder (on the side) and aMovable frame (longitudinal-running) equipped to allow easy access to allallow points of the surface. The design of this portal pressmakes it possible to put heavy material on the table with a crane and thatSlide the portal over the material at the beginning of the pressing process.The quality of these hydraulic s ...
pressure: 63 tpassage width: 1350 mmstroke: 300 mmtotal power requirement: 16 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 2,0 x 1,8 x 3,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력: 500 t통로 폭: 750 mm스트로크: 120 mm총 전력 요구 사항: 57 kW기계 무게 ca: 16 t기계 크기 ca.: m
pressure: 10 tdistance between columns: 500 mmstroke: 200 mmtotal power requirement: 10 kWweight of the machine ca.: 4.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력: 125t컬럼 간 거리: 1050mm스트로크: 250mm총 전력 요구 사항: 40kW기계 무게 ca: 8,5t기계 치수 ca: m
pressure: 34,0 kNstroke: 40 mmthroat: 130 mmWorking height from to: 80 - 240 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 80 Kgdimensions: 375 x 200 mmToggle pneumatic pressesincl. working height fine adjustment via bevel gear with lateral crankcomfortable and easily adjustable.Toggle lever pneumatic presses are to be used when the maximumpressure is required shortly before the end of the stroke, e.g. when assembling, punching,embossing, caulking, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 tthroat: 360 mmstroke: 560 mmtotal power requirement: 33 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: 2000x2400x3650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력: 10t스트로크: 200mm테이블 크기: 450 x 450mm작업 속도:: 10mm/초최대 작업 높이 : 940 mm툴피스 최대 높이 : 150 mm총 전력 요구 사항 : 1,1 kW : 150 x 6 mm무게 : 0,4 t치수 : 1,15 x 0,5 x 0,9 mm수평 벤딩 머신 포함 : - NC 제어 - 듀얼 풋 스위치 - 표준 도구 세
pressure: 200 tstroke: 400 mmdaylight longitudinal/sideways: 1300 /450 mmdayligth: 900 mmtank capacity: 75 lliter capacity: 22 lfeed down: 6,9 mm/secfeed up: 12,6 mm/secMotor output: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,0 x 0,75 x 2,8 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tstroke: 400 mmtable surface area: 920 x 540 mmMotor output: 2,2 kWliter capacity: 9,0 ldayligth: 800 mmtank capacity: 31 ldaylight between the columns: 920 x 300 mmweight of the machine ca.: 0,725 tdimensions of the machine ca.: 1,45 x 0,85 x 2,45 mHand and Motor operated.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력: 40 t테이블 길이: 670 mm테이블 폭: 570 mm총 전력 요구 사항: kW기계의 무게 ca.: t기계의 치수 ca.: m
pressure: 20 tstroke: 180 mmdaylight between the columns: 540 x 100 mmdayligth: max. 990 mm: 72 mmdiameter of piston: 48 mmweight of the machine ca.: 0,12 tdimensions of the machine ca.: 0,8 x 0,7 x 1,8 mOur frame presses are officially CE certified according to the latest rules.Almost all presses offered in this area are not CE certified.- with manual hydraulics- Move the cylinder sideways- Pressure gauge- 2 press documentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 tstroke: 180 mmdaylight between the columns: 335 x 115 mmdayligth: max. 340 mm: 56 mmdiameter of piston: 40 mmweight of the machine ca.: 0,05 tdimensions of the machine ca.: 0,75 x 0,53 x 1,6 mOur frame presses are officially CE certified according to the latest rules.Almost all presses offered in this area are not CE certified.- with manual hydraulics- Move the cylinder sideways- Pressure gauge- 2 press documentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tthroat: 250 mmstroke: 100 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 1000 x 1700 x 2600 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tpassage width: NA mmstroke: 180 mmtable length: 690 mmtable width: 530 mmdistance between columns: 420 mmtotal power requirement: 18 kWweight of the machine ca.: tdimensions of the machine ca.: mHydr. 4-Pillar Press for Embossing/CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 3 tthroat: 0 mmstroke: 200 mmtotal power requirement: 15 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mFully Automatically Straightening Press, 3 Stations,parts turning, (bolts)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 tcolumn daylight: 2600 mmstroke: 800 mmtable surface area: 6000 x 3000 mm: max. 800 mmadjustment of press crosshead: 5200 mmslide adjustment -horizontal: 1800 mmCapacity: 162 l/minfeed down: 9 mm/secfeed up: 14 mm/sectotal power requirement: 45 kWweight of the machine ca.: 50 t- Hydraulics : Rexroth- Controls : Tailor- Cylinder chromed- Operation via remote control & joystick- Stroke length adjustable via sensors- Pressure adjustable via PLCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
