하위 범주
(3 카테고리 레벨)
생산자:
(범주: 108)
Welding turntable with - Quick-release chuck 65mm - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable Table diameter 180 mm Table load horizontal 10 Kg Table load vertical 5 Kg Chuck diameter 65 mm Speed 2 - 10 rpm Swivel range 90 degrees Tilt adjustment: manual Connection voltage 230 V Machine weight approx. 15 kg Space requirement approx. 400 x 400 x 400 mm Condition: never used / new (5) Auction-ID: A7-48486-82
Set 1 - 33 pieces, 28mm system, consisting of: 12x quick-release bolts with short twist lock, without O-rings 4x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 2x Stop and Clamping Angle 175 L - Cast Iron 2x Stop and clamping bracket 300 G left - Nitrided 2x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 4x Professional Screw Clamp - Nitrided 2x Professional Screw Clamp 45°/90° - Nitrided 1x accessory set consisting of: eccentric, Allen keys, brush, whetstone, Sample CleanBasic, Sample non-stick and burner holder. Condition: never used / new (5) Auction-ID: A7-48486-128
Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Pictured accessories are not included! Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, This allows the table with pallet truck. Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Accessories on the table and pallet truck are not included Condition: never used / new (5) Auction-ID: A7-48486-43
Basic Set 3: 69 pieces, 28mm system, consisting of: Ferrules: 10 x 280604 Bolts: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 4 x 284050 Accessory set. 1 x 163999 Condition: never used / new (5) Auction-ID: A7-48486-180
Container Rotating Device incl. foot switch and remote control Load capacity 5.0 t Workpiece diameter 303 x 2438 mm Feed speeds infinitely variable 0 - 1745 mm/min Wheel diameter 305 mm Wheel width 100 mm Total power requirement 0.5 kW Machine weight approx. 0.37 t Dimensions approx. 1.5 x 1.05 x 0.7 m Condition: never used / new (5) Auction-ID: A7-48486-112
Siegmund Workbench Perforated plate made of high quality steel S355J2+N + plasma nitriding - 16 mm bore - Holes in 50x50 mm increments - Material thickness approx. 12 mm - Height adjustable from 800 to 975 mm - Frame made of aluminium profiles Table length 1200 mm Table width 800 mm Table height 800-975 mm Table load 250 kg Machine weight approx. 108 kg Dimensions L x W x H 1.2 x 0.8 x 0.85 m Condition: never used / new (5) Auction-ID: A7-48486-175
Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 840 - 890mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of delivery Table length 1200 mm Table width 800 mm Table height 840 - 890 mm Machine weight approx. 0.3 t Condition: never used / new (5) Auction-ID: A7-48486-51
Basic Set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolts: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Hole diameter 28 mm Condition new Weight 29 kg Condition: never used / new (5) Auction-ID: A7-48486-135
MAG welding machine with: Hose package 3m Welding current max. 250 A Connection voltage 400 V Weight 170 kg Dimensions LxWxH 700 x 450 x 750 mm Condition: unchecked (6) Auction-ID: A7-48486-211
Basic set 1 / 24 pieces for table top thickness 15 and 25mm 4 pcs clamps clamping height 300mm, Variable radius 8 pcs clamping bolts 2 pcs stop 100mm 4 pcs stop 150mm 2 pcs stop 225mm 1 Burner Holder 1 pc. hole brush 30mm 1 pc separating lotion 500ml 1 pc. welding table cleaner on natural, organic base 500ml Number of 24 Positions Weight 22 kg Auction-ID: A7-48486-189
10 pcs quick-release clamping bolts for 28mm system Clamping range from 5 to 50mm Quantity: 10 pcs. Clamping range 15 - 50 mm Hole diameter 28 mm Weight 10 kg Dimensions L x W x H 0.3 x 0.3 x 0.2 m Condition: never used / new (5) Auction-ID: A7-48486-97
Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, This allows the table with pallet truck. The accessories shown are optional Table length 2000 mm Table width 1000 mm Table height 850 - 900 mm Machine weight approx. 0.45 t Condition: never used / new (5) Auction-ID: A7-48486-88
Special set 96 pieces consisting of: 1x Tool Trolley 30x quick-release bolts with twist lock short, without O-rings 8x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 8x Stop and clamping angle 175 L - cast iron 2x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping bracket 750 G left - Nitrided 1x Stop and clamping bracket 750 G right - Nitrided 1x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping angle 500 G right - Nitrided 4x Stop and clamping angle 300 G left - Nitrided 8x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 16x Professional Screw Clamp - Nitrided 6x Professional Screw Clamp 45°/90° - Nitrided 4x Universal Stop 300 - Nitrided 1x accessory set consisting of: eccentric, Allen keys, brush, whetstone, Sample CleanBasic, Sample Non-stick and burner holder. Condition: never used / new ( ...
Welding table / hole table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 4000 mm Table width 2000 mm Hole diameter 28 mm Table height 815 mm Machine weight approx. 1.3 t Auction-ID: A7-48486-118
Special Set 70 / 28 70-piece, 28mm system, consisting of: 3x Pipe Screw Clamp D28 90° – Art.Nr. 4028397 3x Pipe Screw Clamp D28 180° – Art.Nr. 4028396 3x Pipe Screw Clamp D28 45° – Art.Nr. 4028398 3x Pipe Screw Clamp D28 300x150 – Art.Nr. 4028399 3x Pipe Screw Clamp D28 300x200 – Art.Nr. Reference 4028400 15x Ball Lock Pin D28x50 – Art.Nr. 4027663 10x Pin Pin D28x80 – Art.Nr. 4028876 4x Universal Stop D28 100x50x25 mm – Art.Nr. 4028469 4x Universal Stop D28 150x50x25 mm – Art.Nr. 4028470 4x Universal Stop D28 225x50x25 mm – Art.Nr. 4027657 2x Universal Stop D28 300x50x25 mm – Art.Nr. 4027659 2x Stop Clamping Bracket D28 75x50x75x25 mm – Art.Nr. 4028657 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028658 2x Stop Clamping Bracket D28 175x50x175x25 mm – Art.Nr. 4028649 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028652 2x Stop Clamping ...
Welding transformer type RED 240 – ideal for reliable welding work in the workshop and industrial sector. With strong performance, solid construction and flexible Welding current adjustment range, this device offers everything for precise results. -> Primary: 230 / 380 V, 6.3 / 6.9 kVA -> Current Consumption: 27.5 / 15.5 A -> welding current: 26–150 A (40% ED) / 30–240 A (100% ED) -> open-circuit voltage: 62 V -> degree of protection: P22 – Cooling type S – Insulation class F Perfect for those looking for a reliable, durable and high-performance Search for a welding machine. Auction-ID: A1-48483-63
The SHARC T power source is a TIG welding machine for DC welding (DC version) and for DC and AC welding (AC/DC version)based on an innovative arc shaping process. In the application, the SHARC process leads to higher welding speed while improving nutritional quality and reducing the Ancillary welding costs (less warping, improved penetration, reduced Tarnishing of the workpiece, less hardening of the transition edge zones and, if necessary, dispensing with filler materials). --> Specifications <-- --> Welding current type: DC --> mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode adjustment range: 25-280 A --> Welding voltage: 22V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23kVA --> Duty cycle 60%: 320 --> 100% duty cycle: 260 --> Cooling Type: F --& ...
The \"mti inverter series\" newly developed by ESS for 1-phase welding machine, which has already proven itself thousands of times over, is now being developed by a 3-phase system expanded. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology, also offers the opportunity to translate the respective advantages into forward-looking welding machines. --> Specifications <-- --> Mains connection: 3/PE AC 400 V --> Primary maximum power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> rod electrodes: Ø 1.5 - 5 mm --> Degree of protection: IP 23 --> Water cooling device for the welding torch: built-in Auction-ID: A1-48483-114
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kgProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Condition: unused, in the original packaging Portable Welding Machine Adjustable amperage: 10-130 amps Electrodes: Suitable for electrodes from 1.6 to 3.2 mm Ø duty cycle: 25% duty cycle Equipped with: LED display Includes: MMA torch Connection: 220 volts Technology: IGBT Technology Function: Electrode Welding (MMA) Equipped with: \"Hot-start\", \"Arc Force\" & \"Anti-sticking\" function Features: Small size, lightweight, portable and easy to use Including: manual Auction-ID: A1-47951-84
Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min Auction-ID: A1-47951-46
Industrial Wet Dust Collector (Wet Scrubber) General data: Machine type: Wet dust collector / sludge extractor Condition: Used Weight: approx. 300 kg Dimensions (L x W x H): approx. 800 x 800 x 1800 mm Technical details: Filtration method: Water-based (wet scrubbing) Construction: Vertical cylindrical separator tank Air handling: Top-mounted fan/motor Connections: Inlet and outlet ducting, drainage system Auction-ID: A7-48441-27
Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support Auction-ID: A1-47951-118
회전 속도: 0,7-9,0 U/min 토크: 2.5-10 Nmtable 적재 용량 - 중앙/최대: 50 kg 용접 전류: 400 전압: 230 V 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.
Three-phase power supply 380–415 V, 50/60 Hz. Welding range 40–320 A with no-load voltage 14–40 V. Adjustable wire feed speed 0–18 m/min. Auction-ID: A7-48410-874
350 € 
