용접 테이블 (97)

Lg.Nr. 26071 기술 데이터: - 적재 용량: 650 kg - 페이스플레이트 치수: 700 x 700 mm - 페이스 플레이트 모트. 무한히 기울일 수 있는 0 - 135 ° - 모트 0.07 - 1.5 rpm 무한히 조절 가능한 회전 무브먼트 - 수평 테이블 높이 890 mm - E. 컨트롤 버튼 - 공간 요구량 대략 W 850 x H 890 x D 1200 mm - 무게 약 400 kg

Included support arms and clamping tools. Product on table not included Auction-ID: A1-48649-4

Lg.Nr. 25075 모토. 용접 로터리 및 틸팅 테이블 사양: - 적재 용량 1000 kg - 페이스 플레이트 직경 800mm - 페이스 플레이트는 모터에 의해 기울어질 수 있습니다. - 로터리 무브먼트 일렉트릭. 무한 가변 0 - 250 cm/min - 용접 전류 전송 650 A - 구동 400 V / 2.8 kW - 수평 위치에서 테이블 높이 약. 1100 밀리미터 - Re- + 시계 반대 방향 회전 - 필요한 공간 약. 너비 1200 x 높이 1100 x 깊이 1500 mm - 무게 약. 850 킬로그램

MIG (not tested) 230V / 400V 3~ Auction-ID: A3-46152-6149

Key data: 1180 mm, 990 mm, 765 mm

무거운 용접 및 클램핑 테이블 1,180 x 990 밀리미터 높이 765 mm 클램핑 홈 폭 34mm 소재 두께 40mm 중량 약 1,020kg

Equipped with grid holes in top and side beams, Ø 30 mm, top thickness approximately 20 mm. Auction-ID: A1-48474-209

기계 유형: 용접 회전하는 테이블 제조사: Merkle / Conzelmann 타입 CD 50/25 - 320 연결 전압 1 x 230 V 속도 범위 0.25 – 2.5 rpm, 무한 가변 속도 제어 1 : 10 토크 2.5 – 10 Nm 페이스 플레이트 직경 250 mm 페이스 플레이트 - 내부 통로 10 mm 페이스 플레이트(135)의 틸트 각도 수직 하중 용량 0.5 kN = 50 kg 테이블 높이 320 mm 틸팅 무브먼트 매뉴얼, 클램프 부착 가능 티핑 토크 90 Nm 팬터그래프 400 A 80 % d.c. 연결 - 풋 스위치 간단 - 더블 풋 스위치 - 풋 리모콘 나이 3 세 조건: 새것처럼 좋은 체중 44 kg 보증: 배송일로부터 24개월 원래 가격 €2,198.00 + VAT 제안 가격 €1,690.00 + VAT 풋 스위치는 3mtr로 간단합니다. 케이블 239.00 € + VAT 019.0.2900 3mtr의 더블 풋  ...

Equipped with grid holes in top and side beams, Ø 30 mm, including various clamps, stops, pins and clamping accessories Auction-ID: A1-48474-106

용접 증기 적출 테이블 용접 테이블 DCE UMA150HG5 먼지 제거 필터가 있는 통합 흡입 기능이 있는 용접 테이블 제조업체 먼지 제어 장비 집진기 우마 150H G5를 타자를 치십시오 사진에 따라 휴식

Table surface: 1100 x 550 mm, with vice (jaw width: approx. 135 mm), without accessories below Auction-ID: A7-49773-161

사양: - 부하 용량 포지셔닝 테이블 약. 750 킬로그램 - 얼굴 디스크 직경 500 mm - 공작물 직경 1600 mm - 수평 위치 대략의 높이 턴테이블. 750 밀리미터 - 오른쪽, - + 왼쪽 회전이있는 턴테이블 - 회전축 턴테이블 무한 360 - 회전 당 회전 시간 12.5 초. - 왼쪽 + 오른쪽 회전 - 스위블 축 회전 각도 180 - 180 회전 각도 10 초의 회전 시간. - 턴테이블 + 스위블 암을위한 2 x 더블 풋 버튼 - 수력. 턴테이블 중간에 공작물을 클램핑하기위한 클램핑 볼트 - 클램핑 스트로크 / 클램핑 볼트의 클램핑 이동 32mm - 클램핑력 프레스 / 당김 80 / 48.9 kN - 클램핑 실린더 내부 나사산 M 27 x 40 - 포지셔닝 제어 시멘스 - 수동 또는 제어를 통한 작동 - 대략적인 공간 요구 사항.  ...

Equipped with grid holes in top and side beams, Ø 30 mm, top thickness approximately 20 mm, including various clamps, stops, pins and clamping accessories. Auction-ID: A1-48474-100

Equipped with grid holes in top and side beams, Ø 15 mm, top thickness approximately 12 mm, including various clamps, stops, pins and clamping accessories. Auction-ID: A1-48474-258

Equipped with grid holes in top and side beams, Ø 30 mm, including various clamps, stops, pins and clamping accessories Auction-ID: A1-48474-99

Technical equipment: Manufacturer Extraction arm: Plymovent Machine type: Soldering and welding booth / manual workstation Worktop: Steel worktop with perforated grid Suction: 1x Plymovent suction arm with capture hood Monitor: 1x flat screen monitor Scanner: 1x Barcode Scanner Torch: 1x Soldering/Welding Torch Media supply: 1x media plate with gas, compressed air and supply connections Air gun available Protective cladding made of aluminium profiles and transparent protective screens Industrial Aluminum Profile Frame Auction-ID: A1-49461-30

Technical equipment: Manufacturer Extraction arm: Plymovent Machine type: Soldering and welding booth / manual workstation Worktop: Steel worktop with perforated grid Suction: 1x Plymovent suction arm with capture hood Monitor: 1x flat screen monitor Scanner: 1x Barcode Scanner Torch: 1x Soldering/Welding Torch Media supply: 1x media plate with gas, compressed air and supply connections Air gun available Protective cladding made of aluminium profiles and transparent protective screens Industrial Aluminum Profile Frame Auction-ID: A1-49461-60

Untested and Used Viewing desired Auction-ID: A1-49382-44

Sale from caldelabra/lamp post factory liquidation. Welding table 202x300 cm Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-14

Sale from caldelabra/lamp post factory liquidation. Welding table 151x255 cm (general height 88 cm, max. height 105 cm) Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-12

Sale from caldelabra/lamp post factory liquidation. Welding table 151x255 cm. Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-13

top thickness approximately 50 mm. Including accessories, and accessories. Auction-ID: A1-48474-210

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 300 mmbore: 28 mmweight: 1670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 880 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 22 mmweight: 214 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 530 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 554 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 124 bore: 28 mmweight: 326 kg4-283500consisting of:- 14x Professional screw clamp - nitrided -- 10x Professional screw clamp 45°/90° - nitrided- 8x Prism Ø 50 135° with screwed-in collar - nitrided- 36x Quick-clamping bolts without groove, double - burnished- 8x magnetic clamping bolts 68 - aluminum- 12x universal stop 150 L - nitrided- 12x universal stop 225 L - nitrided- 4x universal stop 500 S - nitrided- 12x stop and clamping bracket 175 L - nitrided- 2x stop and clamping bracket 300 G - nitrided- 2x stop and clamping bracket 500 G - nitrided- 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided- 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracketClamping bracket 750 G right - nitrided- 1x stop and clamping bracket 800 GK left - nitrided ...

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 392 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.553 kgProduct description:Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet.Welding table:- High-quality steel S355J2+N + plasma nitriding 200- Holes surface 100x100 mm grid- Corners, edges, and holes 45° chamfered- Holes side panel in diagonal grid- Construction reinforced by ribs- Includes basic foot equipment (working height 850 mm)Accessories:- 6 x professional nitrided screw clamps- 12 x quick-release bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping angle 175 L nitrided- 2 x stop and clamping angle 500 G nitrided- 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided- Allen key size 6- Brush Ø 30 with protective cap- CleanB ...

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 408 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 22 mmweight: 740 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 1 weight: 2,57 kgwidth: 265 mmheight: 250 mmclamping force max.: 3 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mmSide panel height: 200 mmwork height max.: 850 mmweight: 850 kg Special item - fair use - high-quality steel S355J2+N + plasma nitriding- Side panel holes in diagonal grid- Corners, edges and drill holes chamfered 45°- Construction reinforced with ribs- incl. basic foot equipment (working height 850 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1075 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kgProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mmtable load: 500 kgswivelling range: 0 - 90 Gradtable load: horizontal 500 Kgtable load: vertikal 250 Kgboring diameter: 100 mmtable turning speeds: 0,2 - 1,9 U/mintotal power requirement: 0,37 kWThe D-BYT N welding manipulator has a hollow shaft, also known asSpindle bore in the rotary table, which makes inert gas welding possible. theDue to the compact design, turn-tilt tables can be installed in anyintegrate existing production facilities. Inert gas welding (forming gas).thereby simplified.Features:- Double foot pedal (start-stop/left-right) included- The new welding table D-BYT-500N includes, in addition to the standard start/Stop foot pedal also an extra remote control (on the cable).- Infinitely adjustable rotation speed of the table- Suitable for any welding process, even high frequency- Very high stability - compact model- Through hole in the turntable plate- ...

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 543 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 bore: 28 mmweight: 51,2 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 913 kg280030.XD7D- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 – 27 mm- Sidewall made of high quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Holes surface in diagonal grid- Rounded corners, edges and holes- Side panel height 200 mm- Holes in the side wall in the diagonal grid- Including scaling on the surface- Structure reinforced with ribs- Grid lines enable precise build-upsIncluding 4x feet basic equipment 650 item no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 150 mmbore: 22 mmweight: 395 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.