연삭 기계 사용 판매를 위해 (2,242)

연마 높이: mm 연마 폭: mm 연마 휠 직경: mm 총 전력 요구량: kW 기계 무게 ca.: 필요 공간: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

연마 직경: mm 연마 길이: mm중심 높이: mm 총 전력 요구량: kW 기계 무게 약 : 필요한 공간: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

grinding diameter max.: 140 mmregulating wheel width: 250 mmmax. width of grinding wheel: 250 mmmax. workpiece length: 245 mmgrinding wheel diameter min/max.: (630)500 x 305 x 250 mmgrinding wheel peripheral speeds:: 35 / 45 / 60 m/secregulating wheel diameter: 315 x 127 x 250 mmregulating wheel turning speeds: 11 - 280 U/mingrinding spindle drive: 22/30 kW: 460 U/minControl: total power requirement: 33 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4 x 2 mCentreless external cylindrical grinding machine for through-feed and plunge grindingRefurbished and modernised in 2022Equipped with:- Siemens NC control with latest control software- New control cabinet & electrical system (Siemens)- New motors for quick adjustment, regulating wheel and grinding wheel- New hydraulic & lubricating oil system- New enclosure in accordance with CE standard- New blow-off nozzles for the g ...

workpiece diameter: 660 mmworkpiece length: 8000 mmhoning/re-bore length: 7600 mminternal diameter: 50,8 - 609,6 mmstroke length max.: 7600 mmspindle motor: 29,8 kWspindle turning speed range: 0 - 300 U/minLifting capacity: 13,5 kWstroke speed: 0 - 30,5 m/minworkpiece weight: 8000 kgcontrol: Siemens Simatic total power requirement: - kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: 18,7 x 1,5 x 1,5 mUniversal horizontal. Honing Machine / Long Stroke Cross Grinding Machinewith servo drive and electrical feed system- Siemens Simatic (Touch)- Coolant system with paper band filter- steady restThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

스트립 폭: / mmband 길이: / mmband 속도: / m/min 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 생성되었습니다.

수량: 1 STK-> 80277.15301-> m=0.7-1.3/22.5-> DP=36-19 페슬러에서 제작한 다양한 다이아몬드 드레싱 휠이 제공됩니다. 적용: 연삭 휠 드레싱 / 정밀 가공 부품당 가격, 다중 구매 시 할인 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

자기 테이블 직경: 400 mmx, 이동: 550 mm 기계 무게 약 1.5 t. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 생성되었습니다.

width of the strips: 50.0 mmband length: 940 mmband speed: 3.0 - 22 m/minturning speeds: 1450 U/mintube diameter: 16.0 - 114 mmradius: 180 °total power requirement: 4.75 kWweight of the machine ca.: 265 kgrange L-W-H: 1000 x 750 x 1300 mmFurnishing:- stationary pipe belt grinders- Automatic material feed with separate drive motor- Replacement sanding belts- Stepless speed adjustment- Manual adjustment of tube tension- Polish bent pipes up to 180 (angle).- Manual work possible without feed- CE mark / declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 99999 mmgrinding depth: 99999 mmswing diameter: 99999 mmgrinding diameter: 99999 mmgrinding length: 200 mmcentre height: 175 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC internal grinding machineB-axis 4 x 90°Q-axis for adjusting tapersUsed with minor maintenance2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm1 external grinding motor spindle Fischer MFVS1407 7,000 rpm-Pneumatic power clamping device with 20mm stroke-Dressing device with 2 swivelling arms, hydraulically foldable back-Grinding detection ring sensor Dittel on the workpiece headstock-Passive grinding detection with magnetic base-Paper belt filter 375 lThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 80 - 900 mmgrinding depth: 500 mmswing diameter: 1.000 mmControl: SIEMENS Sinumerik 802 solution linemax. external grinding diameter Ø: 900 mmworkpiece weight: 1.000 kgfinishing spindle: : spindle taper: 60 mmpower capacity: 15 kWturning speed range - grinding wheel: 1.500 - 3.500 1/mintotal power requirement: 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 4,7 x 2,9 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 125 mmmodule: 4 control: SIEMENS SINUMERIK travel -x axis: 105 mmtravel -y axis: 40 mmtravel -z axis: 500 mmworkpiece diameter: 17 - 39,5 mmworkpiece height: 6 - 15 mmGear Honing Machine | GLEASON-HURTH - ZH 125The machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: ZH125 | ZH-125The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

연마 직경: 390 mm 연마 길이: 650 mm 중심 높이: 200 mm 작업물 무게: 최대 250 kgx 축: 380 mmz, 축: 1150 mm 샌딩 디스크 직경: 400 mm 주변 속도: 20-50 m/sec 작업물 스핀들 무단: 1 - 650 U/mintailstock 퀼 테이퍼 MT: 4 퀼 스트로크: 45 mm. 퀼: 50 mm, 총 전력 요구량: 기계 무게 22 kW 무게 약 약 : 기계 크기: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

grinding length: 6000 mmgrinding width: 500 mmworkpiece height: 250 mmspeed of grinding head: 0,02 - 30 m/mintable width: 700 mmsegment head diameter: 630 mmgrinding motor: 110 kWgrinding wheel speeds: 1500 U/minmagnetic clamping plate: 6200 x 200 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mPrecision vertical surface grinding machineequipped with :- segment grinding head- magnetic table 6200 x 200mm - inclinable- Traction drive grinding head by direct current via toothed rack- Coolant tankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

연마 길이: 160 x 400 mm 기계: JA 기계 무게 약 0.5 t이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

width of the strips: 75 mmband length: 2000 mmband speed: 36 m/mintotal power requirement: 4 kWweight of the machine ca.: 82 kgdimensions of the machine ca.: 1000 x 500 x 1150 mmBelt sander Metallkraft MBSM 75-240-1, article no.: 3923272For sanding surfaces, edges and rounding offDescription:- Powerful motors and vibration-free operation for the best sanding results- Quick sanding belt change in seconds thanks to quick-release system- Large surface sanding area thanks to fold-away upper sanding belt cover- Continuous sanding surface after removal of attachments enables sanding of long workpieces too- Can be used with and without extraction- One extraction nozzle on the spark box and one on the rear belt roller- Simple adjustment of the belt run via adjusting screw- Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system- Infinitely tiltable sanding unit- ...

grinding length: 600 mmgrinding width: 350 mmworkpiece height: mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

연마 길이: 1500 mm, 중심 높이: 180 mm, 기계 무게 약 3.9 크기 크기: L: 4900 x 1650x 1800 m. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

workpiece diameter: 1000 mmworkpiece weight: - kgworkpiece height: - mmControl: grinding wheel motor: 11 kWtotal power requirement: 25 kWweight of the machine ca.: 6500 kgdimensions of the machine ca.: 4100 x 3200 x 2600 mmMachine comes from a plant closureEquipment:Coolant system 500 liters with paper belt filter4 grinding stone (3 of them unused)Technical data:Rotary table diameter 800 mmMax. distance from rotary table to grinding spindle center 850 mmGrinding wheel diameter 400 mmGrinding wheel width 80 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 762 mmgrinding length: 5500 mmcentre height: mmworkpiece weight: 10000 kggrinding wheel size: 762 x 76 x 304,8 mmgrinding wheel turining speeds: 1 -750 U/minturning speed range - workpiece: 14,5 - 86 U/minmain drive motor: 14,8 kWworkpiece drive: 5,5 - 7,35 kWgrinding head infeeding speed: 0,00635 - 0,0508 mm/mintable speeds: 101 - 2021 mm/mintotal power requirement: ca 25 kWweight of the machine ca.: 27 tdimensions of the machine ca.: 13,5 x 3,35 mMachine complete with:- 9 x steadies.- Coolant/Filtration Tank.Machine has had over 80.000€ of engineering maintenance work/overhauling in 2023 including replacement of air bearing liners. 7 x steadies fully overhauled. Overhaul of top table & centre heights of workhead & tailstock.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 450 mmgrinding length: 1000 mmcentre height: 225 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mPhoto of machine already delivered in similar scope:-major maintenance-New table geometry-partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard)grinding wheel equipment RIGHT 300x40x127mmInternal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-PolyB-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/sHigh-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstockNO micro-adjustment on the tailstockSpring-loaded quill insertTop table cooling Standard workpiece headstock MK 5 DIN 55026 size 5Micro-adjustment for the standard workhead Dressing device on the lower table A ...

grinding diameter: 450 mmgrinding length: 1000 mmcentre height: 225 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mAs the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled.Mechanical overhaul:• Overhaul of the entire machine according to Kellenberger measuring protocol• A new service-friendly cabin• RepaintingElectrical overhaul:• New, modern CNC cylindrical grinding machine control system• New built up control cabinet• New drive technology• Exchange of all electric lines, Berus pressure switch, etc.• New absolute glas scales in X- and Z- axis• New absolute rotary encoder (for B-axis)Please rem ...

grinding length: 500 mmgrinding width: 250 mmworkpiece height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

연마 직경: 360 mm 연마 길이: 3000 mm 중심 높이: 180 mm 총 전력 요구: 17 kW 기계 무게 ca.: tdimensions ca.: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

turning speeds: 2905 U/minweight: 200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1.000 mmgrinding width: 550 mmworkpiece height: 400 mmtable surface area: 1.580 x 550 mmtable load capacity: 950 kgmagnetic clamping plate: 1.000 x 550 mmx-Travel: 1.200 mmtable feed: 1 - 30 m/miny-axis: mmvertical feeds:: 1 - 300 mm/minz-axis: 470 mmcross feed: 1 - 2.000 mm/mindimensions of grinding wheel: 400 x 100 x 127 mmgrinding wheel speeds: 1.500 - 3.500 U/mingrinding spindle drive: 11,00 kWControl: total power requirement: 23,00 kWweight of the machine ca.: 7,50 tdimensions of the machine ca.: 4,50 x 2,90 x H2,90 mCoolant system with coolant pump integrated in the hydraulic tank,exhauster.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

드릴 직경: 32 mm드릴 직경: 32 mm 드릴 길이: 0 mm 드릴링 길이: 0 mm립 각도: 립 각도: 총 전력 요구량: kW 총 전력 요구량: kW 기계 무게 ca.: t무게 ca.: t크기 기계의 크기 ca.: m. 기계 치수 ca.: m범용 드릴 비트 그라인더롯 액세서리 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

centre height: 125 mmcentre distance: 400 mmControl: FANUC 21i Capstan diameter: max. 406 mmwheel dimensions: 406 x 127 x 40 mmworkpiece weight: 30 kglongitudinal slide -travel: 483 mmcross slide - travel: 254 mmtotal power requirement: max. 20 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 3,0 x 2,0 x 2,1 mincluding 2 Pcs. internal grinding spindle incl. B axis 1° Hirt, controlledincl. C-axisincl. Quick-Set Probeincluding Sensitronincluding Magnetic Jawincluding hydraulically foldable dresserincluding other small accessoriesincluding documentationwithout a coolant system, as it was previously connected to a central unitPower On hours approx. 71,000 hSpindle hours approx. 25,900 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.